Research on Dynamic Oil-filling Cushioning Properties of Locking Clutch in a Hydrodynamic Transmission Vehicle

doi:10.3969/j.issn.1000-1093.2019.07.004

Abstract

Abstract: The dynamic cushioning properties of locking clutch for a hydrodynamic transmission vehicle are studied to improve the locking quality in the transition process from hydrodynamic transmission operating condition to mechanical condition, in particular, to reduce the impact in vehicle's locking process.The dynamic models for hydrodynamic torque converter with locking function and its input and output components are established. And the effects of oil-filling, buffer boosting, and step boosting on the locking quality during locking are analyzed. The optimal Latin hypercube design method is used to optimize the buffer slope in the buffer boost stage. The quality evaluation parameters, such as jerk, sliding time and sliding work, before and after optimization are compared using the proposed locking quality evaluation function. A locking characteristic test verification bench was built to verify the locking qualities before and after optimization. The results show that the proposed dynamic system simulation model can be used to accurately predict the dynamic locking process. The locking quality after optimization is significantly improved compared with the result before optimization, and the impact is significantly reduced. Key

Key words: hydrodynamictransmission, bufferoilpressure, optimizationdesign, lockingquality

CLC Number:

TJ810.3⁺22

WEI Wei， PENG Hui， LIU Xu， JIAN Hongchao, XIE Wenhao, YAN Qingdong， ZHU Haoyue. Research on Dynamic Oil-filling Cushioning Properties of Locking Clutch in a Hydrodynamic Transmission Vehicle[J]. Acta Armamentarii, 2019, 40(7): 1358-1364.

References

［1］过学迅, 郑慕侨, 项昌乐. 车辆闭锁式液力变矩器闭锁过程动态性能研究[J]. 北京理工大学学报, 1994, 14(3):273-279.
GUO X X, ZHENG M Q, XIANG C L. Research on dynamic performance of locked hydraulic torque converter during locking process[J]. Transactions of Beijing Institute of Technology, 1994, 14(3):273-279.(in Chinese)
[2］闫清东, 于涛, 魏巍. 液力变矩器闭解锁控制策略研究[J].机械科学与技术, 2013, 32(2):160-163.
YAN Q D, YU T, WEI W. Research on the lockup and unlock control strategy of torque converter[J]. Mechanical Science and Technology for Aerospace Engineering, 2013, 32(2):160-163. (in Chinese)
[3］ YAN Q D, YANG A H, LIU S C, et al. A weight-based optimization method of lockup quality for an automotive hydrodynamic torque converter[J]. Hydromechatronics Engineering, 2013, 41(6): 42-47.
[4］王松林, 马文星. 装载机液力变矩器闭锁技术的动力性和经济性分析[J]. 北京理工大学学报, 2014, 34(9):907-911.
WANG S L, MA W X. Analysis of power performance and fuel economy of loader with torque converter lock-up technology[J]. Transactions of Beijing Institute of Technology, 2014, 34(9):907-911. (in Chinese)
[5］孙文涛, 陈慧岩, 关超华, 等. 液力变矩器闭锁过程控制技术研究[J]. 汽车工程, 2009, 31(8):761-764, 787.
SUN W T, CHEN H Y, GUAN C H, et al. A research on control technique for lock-up process of hydraulic torque converter[J]. Automotive Engineering, 2009, 31(8):761-764, 787. (in Chinese)
[6］杨凯华. 牵引-制动型液力变矩器理论及特性计算研究[D]. 北京:北京理工大学, 2001.
YANG K H. Research on theory and characteristic calculation of traction brake hydraulic torque converter[D]. Beijing:Beijing Institute of Technology, 2001. (in Chinese)
[7］陈东升, 项昌乐, 刘辉. 液力变矩器的动态特性和动力学模型研究[J]. 中国机械工程, 2002, 13(11):913-917.
CHEN D S, XIANG C L, LIU H. Research on dynamic characteristic and dynamic model of hydraulic torque converter[J]. China Mechanical Engineering, 2002, 13(11):913-917. (in Chinese)
[8］张志凯, 刘宝铎. 变矩器闭锁离合器充油特性的设计[J]. 兵工学报(坦克装甲车与发动机分册), 2000(3):37-42.
ZHANG Z K, LIU B D. The design of oil filling characteristics of the torque converter locking clutch[J]. Acta Armamentarii (Tank Armored Vehicle and Engine), 2000(3):37-42. (in Chinese)
[9］惠记庄, 程顺鹏. 装载机液力变矩器闭锁过程动态分析[J]. 中国机械工程, 2017,28(16):1899-1905, 1913.
HUI J Z, CHENG S P. Dynamic analysis of hydraulic torque converter locking process of loader[J]. China Mechanical Engineering, 2017, 28(16):1899-1905, 1913.(in Chinese)

[10］李春芾, 席军强. 基于双重目标的液力变矩器闭锁过程[J]. 汽车工程, 2018, 40(10): 1200-1205, 1214.
LI C F, XI J Q. Hydraulic torque converter blocking process based on dual target[J]. Automotive Engineering, 2018, 40(10): 1200-1205, 1214. (in Chinese)
[11］刘然. 液力变矩器减速装置控制策略研究[D].北京:北京理工大学, 2009.
LIU R. Study on control strategy of hydraulic torque converter decelerator[D]. Beijing:Beijing Institute of Technology, 2009.(in Chinese)

第40卷
第7期2019 年7月兵工学报ACTA
ARMAMENTARIIVol.40No.7Jul.2019

[1]	WU Zeliang， YE Jianchuan， WANG Jiang， JIN Ren. Parameter Dimensionality Reduction and Optimal Design of Aircraft Airfoil Based on Deep Autoencoder Neural Network [J]. Acta Armamentarii, 2022, 43(6): 1326-1336.
[2]	MA Wenchao, MENG Fanmin, MA Nuo, MENG Junhui, ZOU Ruping. Head Shape Optimization and Water Entry Performance Analysis of Trans-medium Aircraft [J]. Acta Armamentarii, 2022, 43(10): 2588-2597.
[3]	LIU Junsheng， WANG Gang， WANG Kun， SHI Hongbo， GUO Bin. Optimization Design of Modular Tactical Missile under Uncertainty [J]. Acta Armamentarii, 2020, 41(2): 270-279.
[4]	ZHANG Fuyi, WU Qin, ZHAO Xiaoyang, LIU Ying, WANG Guoyu. Multi-objective Optimization of Inlet Duct of Water-jet Propulsion Based on Response Surface Method [J]. Acta Armamentarii, 2020, 41(10): 2071-2080.
[5]	HAN Jun， ZHU Pengcheng， ZHANG Shuai， HONG Huangjie. Multi-object Optimization Design of Hinge Point Location of a New Deployment Mechanism for Scissors-type Bridge [J]. Acta Armamentarii, 2019, 40(5): 1113-1120.
[6]	QIU Tao， ZHANG Jianguo， QIU Jiwei， WEI Juan， YOU Lingfei. Two-parameter Optimization Design Point-based Reliability Analysis Algorithm for Structures with Mixed Uncertainty [J]. Acta Armamentarii, 2019, 40(4): 865-873.
[7]	LI Bin, PANG Yong-jie, ZHU Xiao-meng, CHENG Yan-xue. 6σ Optimization Design of Ring-stiffened Composite Pressure Hull of Underwater Vehicle [J]. Acta Armamentarii, 2018, 39(6): 1171-1177.
[8]	LI Zhi-bin， LU Fang-yun. Anti-impact Analysis of Sacrificial Claddings of Cellular Material with Temperature Gradient [J]. Acta Armamentarii, 2017, 38(12): 2463-2471.
[9]	LIU Qin, SUN Zhi-li, LIU Ying, GUO Zhi-ming, CHEN Yan. Structural Durability Optimization Design Method Based on Improved Cuckoo Search Algorithm [J]. Acta Armamentarii, 2017, 38(12): 2438-2446.
[10]	LIU Qiang, HU Deng-liang, WU Bo, REN Yuan, WANG Wei-jie. Vernier Gimballing Magnetically Suspended Spherical Flywheel and Its Rotor Optimization Design [J]. Acta Armamentarii, 2017, 38(11): 2280-2288.