Research on Optimization of Two-dimensional Imperfect Preventive Maintenance Intervals of Products

doi:10.3969/j.issn.1000-1093.2016.03.015

Abstract

Abstract: For the products of which the failures are affected by the calendar time and service time, the traditional one-dimensional preventive maintenance can’t meet the actual demand. A concept of two-dimensional preventive maintenance is proposed. The two-dimensional preventive maintenance decision is made according to calendar time and service time. A failure rate function expression of two-dimensional maintenance is established, and the process of two-dimensional imperfect preventive maintenance is analyzed in detail. A cost model of two-dimensional imperfect preventive maintenance is proposed to minimize the consumer’s total expected cost in finite life span. An optimal two-dimensional imperfect preventive maintenance interval is derived through examples, and the the applicability and validity of the proposed model are verified through comparison and analysis. A brief discussion about future research area of two-dimensional maintenance is presented.

Key words: ordnance science and technology, two-dimensional imperfect preventive maintenance, math model, virtual age

CLC Number:

TJ07

HAN Yu-cheng, JIA Xi-sheng, BAI Yong-sheng, LI Xin-yue. Research on Optimization of Two-dimensional Imperfect Preventive Maintenance Intervals of Products[J]. Acta Armamentarii, 2016, 37(3): 496-504.

References

［1］陈相侄. 基于不完全维修的二维产品保证成本研究[D]. 杭州:杭州电子科技大学, 2010.
CHEN Xiang-zhi.Research on the cost of two-dimensional product warranty based on imperfect repair[D].Hangzhou:Hangzhou Dianzi University, 2010.(in Chinese)
[2］ Iskandar B P, Murthy D N P, Jack N. A new repair-replace strategy for items sold with a two-dimensional warranty[J]. Computer and Operations Research, 2005, 32(3): 669-682.
[3］ Chukova S, Johnston M R. Two-dimensional warranty repair strategy based on minimal and complete repairs[J]. Mathematical and Computer Modelling, 2006,44(11/12):1133-1143.
[4］ Jack N, Iskandar B P, Murthy D N P. A repair-replace strategy based on usage rate for items sold with a two-dimensional warranty[J]. Reliability Engineering and System Safety, 2009, 94(2):611-617.
[5］ Varnosafaderani S, Chukova S. A two-dimensional warranty servicing strategy based on reduction in product failure intensity[J]. Computers and Mathematics with Applications, 2012, 63(1):201-213.
[6］ Chen T, Popoval E. Maintenance policies with two-dimensional warranty[J]. Reliability Engineering and System Safety, 2002,77(1): 61-69.
[7］甘茂治, 康建设, 高崎,等. 军用装备维修工程学[M]. 北京:国防工业出版社, 2005:210-211.
GAN Mao-zhi, KANG Jian-she, GAO Qi, et al. Military equipment maintenance engineering[M]. Beijing:National Defense Industry Press, 2005:210-211.(in Chinese)
[8］ Yeh R H, Chen M Y, Lin C Y. Optimal periodic replacement po-licy for repairable products under free-repair warranty[J]. European Journal of Operational Research, 2007,176(3):1678-1686.
[9］ Shahanaghi K, Noorossana R. Failure modeling and optimizing preventive maintenance strategy during two-dimensional extended warranty contracts[J]. Engineering Failure Analysis, 2013,28:90-102.
[10］ Hu Q W, Bai Y S, Zhao J M, et al. Modeling spare parts demands forecast under two-dimensional preventive maintenance policy[J]. Mathematical Problems in Engineering, 2015, 2015:1-9.
[11］ Shafiee M, Chukova S. Two-dimensional warranty cost analysis for second-hand products[J]. Communications in Statistics—Theory and Method, 2011,40(4):684-701.
[12］ Iskandar B P, Murthy D N P. Repair-replace strategies for two-dimensional warranty policies[J]. Mathematical and Computer Modelling, 2003,38(11/13):1233-1241.
[13］ Moskowitz H, Chun Y H. A poisson regression model for two-attribute warranty policies[J]. Naval Research Logistics, 1994, 41(3):355-376.
[14］ Yun W Y, Kang K M. Imperfect repair policies under two-dimensional warranty[J]. Journal of Risk and Reliability, 2007,221(4):239-247.
[15］ Kijima M. Some results for repairable systems with general repair[J]. Journal of Applied Probability, 1989, 26(1):89-102.
[16］ Sahin I, Polatoglu H. Maintenance strategies following the expiration of warranty[J]. IEEE Transactions on Reliability, 1996,45(2):220-228.
[17］ Huang Y S, Chen E, Ho J W. Two-dimensional warranty with reliability-based preventive maintenance[J]. IEEE Transactions on Reliability, 2013,62(4):898-907.

[1]	MAO Ming, WANG Jian-bing. Research on Influence of Breakwater on Hydrodynamic Characterisitics of Displacement Amphibious Vehicles [J]. Acta Armamentarii, 2016, 37(9): 1553-1560.
[2]	GAO Jun-qiang, TANG Xia-qing, HUANG Xiang-yuan, CHENG Xu-wei. FEA Method for Analysis of SINS Error Caused by Vibration Isolation System [J]. Acta Armamentarii, 2016, 37(9): 1570-1577.
[3]	NI Yan-jie， CHENG Nian-kai, JIN Yong， YANG Chun-xia， LI Hai-yuan， LI Bao-ming. Numerical Simulation on Pressure Wave in a 30mm Electrothermal-chemical Gun [J]. Acta Armamentarii, 2016, 37(9): 1578-1584.
[4]	LU Ye, ZHOU Ke-dong, HE Lei, LI Jun-song, HUANG Xue-ying. Research on Influence of Muzzle Brake Efficiency on a New Large Caliber Machine Gun Based on Floating Principle [J]. Acta Armamentarii, 2016, 37(9): 1585-1591.
[5]	LIU Guo-qing， XU Cheng. The Study of Bullet-Barrel Matching Design Method of High Precision Sniper Rifle [J]. Acta Armamentarii, 2016, 37(9): 1592-1598.
[6]	LI Zhen-xiao， ZHANG Ya-zhou， NI Yan-Jie， LI Bao-ming. Analysis on the Influence of Turn-off Characteristics of Thyristor on Augmented Railgun [J]. Acta Armamentarii, 2016, 37(9): 1599-1605.
[7]	HU Ming, WANG Jiong, WU Xiao-lang. Estimation Method for Storage Life of Magnetorheological Fluid Fuze Arming Device [J]. Acta Armamentarii, 2016, 37(9): 1606-1611.
[8]	ZHOU Peng， CAO Cong-yong， DONG Hao. Analysis of Interior Ballistic Characteristics and Muzzle Flow Field of High-pressure Gas Launcher [J]. Acta Armamentarii, 2016, 37(9): 1612-1616.
[9]	ZHAO Xue-wei， YU Yong-gang， MANG Shan-shan. Influence of Injection Pressure Change on Expansion Characteristics of Pulsed Plasma Jet [J]. Acta Armamentarii, 2016, 37(9): 1617-1623.
[10]	LIN Xiang-yang, LI Han, ZHENG Wen-fang, PAN Ren-ming. Formation Mechanism of Pore Structure of Ball Propellant with Micro-pores Made by Double Emulsion Method [J]. Acta Armamentarii, 2016, 37(9): 1633-1638.
[11]	CUI Yun-xiao, CHEN Peng-wan, David A. Cendón, DAI Kai-da, ZHONG Fang-ping. Numerical Simulation of Dynamic Brazilian Test of Polymer Bonded Explosive Simulant Based on Cohesive Crack Model [J]. Acta Armamentarii, 2016, 37(9): 1639-1645.
[12]	CAO Hao-zhe， WU Yan-xuan， ZHOU Feng， WANG Zheng-jie. Research on Containment Control of Second-order Nonlinear Multi-agent with Collision Avoidance Mechanism [J]. Acta Armamentarii, 2016, 37(9): 1646-1654.
[13]	LOU Li, FAN Jian-hua, XU Cheng. Research on Topologically Optimized Anti-jamming Technology for Tactical MANETs [J]. Acta Armamentarii, 2016, 37(9): 1662-1669.
[14]	LIU Wei-dong, CHENG Rui-feng, GAO Li-e, ZHANG Jian-jun. Cooperative Engagement-based Differential Guidance Law for Underwater Interceptor [J]. Acta Armamentarii, 2016, 37(9): 1684-1691.
[15]	DAI Yong, QIAN Lin-fang, WU Xiao-jin, XU Ya-dong. Analysis about Thermal-structure Coupling Effect of High Firing Rate Automatic Mechanism of a Gun [J]. Acta Armamentarii, 2016, 37(9): 1738-1743.