Welcome to Acta Armamentarii ! Today is

Acta Armamentarii ›› 2016, Vol. 37 ›› Issue (2): 325-331.doi: 10.3969/j.issn.1000-1093.2016.02.019

• Paper • Previous Articles     Next Articles

Research on Detection Sensitivity Distribution Regularity of Lens-light-screen

TIAN Hui1,2, NI Jin-ping2, JIAO Ming-xing1, HU Xun3, GAO Fen2   

  1. (1.School of Mechanical and Precision Instrumental Engineering, Xi’an University of Technology, Xi’an 710048,Shaanxi, China;2.School of Optoelectronic Engineering, Xi’an Technological University, Xi’an 710032, Shaanxi, China; 3.Chongqing Changan Industry (Group) Co., Ltd., Chongqing 401120, China)
  • Received:2015-05-18 Revised:2015-05-18 Online:2016-04-22
  • Contact: TIAN Hui E-mail:tianh80@126.com

Abstract: In order to meet the testing requirement of indoor optical target with large detection area, two patterns of lens-light-screen’s engineering realization method are studied, of which one is sector lens-light-screen, and the other is rectangle lens-light-screen. The working principle of each kind of lens-light-screen is analyzed. The luminous flux may be changed when a flying projectile goes through the lens-light-screen in different position, of which the corresponding formulas are deduced based on the photometry principle. The sensitivity distribution regularity of each kind of lens-light-screen is simulated using Matlab. It is verified by the firing tests of air gun bullets. The results show that the signal amplitude of the projectile collected by an oscilloscope is in conformity with the sensitivity simulation results, which provides a reference for the engineering design of the optical targets with lager detection area.

Key words: ordnance science and technology, external trajectory parameter measurement, photometry, light-screen array, lens-light-screen, detection sensitivity

CLC Number: