[1] 章勇, 朱增伟, 朱荻. 辅助磨擦对镍电铸层力学性能的影响[J]. 中国有色金属学报, 2012, 22(5): 1377-1382. ZHANG Yong, ZHU Zeng-wei, ZHU Di. Effect of attrition on mechanical properties of electroformed nickel[J]. The Chinese Journal of Nonferrous Metals, 2012, 22(5): 1377-1382.(in Chinese) [2] 雷卫宁, 朱增伟, 陶钢. 超细晶粒镍药型罩的精密电铸试验研究[J]. 中国机械工程, 2010, 21(3): 340-343. LEI Wei-ning,ZHU Zeng-wei,TAO Gang. Experimental research on finer-grain electroformed nickel shaped charge liner[J]. China Mechanical Engineering, 2010, 21(3): 340-343.(in Chinese) [3] Li X L, Zhu Z W, Zhu D, et al. Orbital-abrasion-assisted electroforming of non-rotating parts[J]. Journal of Wuhan University of Technology:Materials Science Edition, 2011, 26(5):827-831. [4] Zhu Z W, Wang D, Ren J H. Abrasive-assisted electroforming of nickel on translational cathode[C]∥the 15th International Manufacturing Conference in China. Nanjing, China:Nanjing University of Aeronautics and Astronautics, 2013. [5] McGeough J A, Leu M C, Rajurkar K P, et al. Electroforming process and application to micro/macro manufacturing [J]. Annals of the CIRP, 2001, 50(2):499-514. [6] 范爱玲,田文怀,周登陵,等.电铸铜药型罩高速变形前后微观组织的观察以及变形机理的探讨[J]. 兵器材料科学与工程, 2001, 24(4): 3-5. FAN Ai-ling,TIAN Wen-huai,ZHOU Deng-ling,et al. Micro-structural observation of electroformed copper shaped charge liner before and after high-speed deformation and study of deformation mechanism[J]. Ordnance Material Science and Engineering, 2001,24(4):3-5.(in Chinese) [7] 孙起.电铸药型罩研究与分析综述[J].兵工学报, 2000,21(增刊1): 86-88. SUN Qi. A review on the progress of research inelectroformed liners [J]. Acta Armamentarii, 2000,21(S1):86-88.(in Chinese) [8] Bonou L, Eyraud M,Denoyel R,et al. Influence of additives on Cu electrodeposition mechanisms in acid solution: direct current study supported by non-electrochemical measurements[J]. Electrochimica Acta, 2002, 47: 4139-4148. [9] Tajiri K, Nakamura T, Kabeya Z, et al. Development of an electroformed copper lining for accelerator components[J]. ElectrochimicaActa, 2001, 47(1): 143-148. [10] 朱增伟, 朱荻, 曲宁松. 力学-电沉积法制备纳米晶光亮镍[J]. 中国科学: E辑, 2008, 38(9): 1529-1538. ZHU Zeng-wei, ZHU Di, QU Ning-song. Mechanics- nanocrystalline bright nickel by electrodeposition[J]. Science China, 2008, 38(9): 1529-1538.(in Chinese) [11] Krushev L, Pangrova V,Pangarov N. The effect of crystal orientation on the strength of copper deposited at high current densities[J]. Plating,1968,55(8): 841-842. [12] 朱增伟, 朱获. 硬质粒子扰动对电铸铜微观结构与性能的影响 [J]. 中国有色金属学报, 2006, 16(9): 1558-1562. ZHU Zeng-wei, ZHU Di. Effect of hard particle perturbation on microstructure and property of electroformed copper[J]. Chinese Journal of Nonferrous Metals, 2006, 16(9): 1558-1562.(in Chinese) [13] Lin K, Sheppard K G. The mechanical behavior of electroplated copper at elevated temperatures[J]. Plating and Surface Finishing, 1993, 80(8): 40-46. [14] 朱增伟, 朱荻. 硬质粒子扰动下铜电沉积研究[J].电化学, 2005,11(4):412-415. ZHU Zeng-wei, ZHU Di. Copper electrode position under the perturbation of hard particles[J]. Electrochemistry, 2005, 11(4): 412-415.(in Chinese) [15] 徐营,朱增伟,彭永森,等. 摩擦辅助电铸铜试验研究[J]. 电镀与 环保, 2014, 34(1): 16-19. XU Ying,ZHU Zeng-wei,PENG Yong-sen, et al. A research on friction assisted copper electroforming [J].Electroplating & Pollution Control, 2014, 34 (1):16-19. (in Chinese) [16] 王爱荣. 影响大面积制件镀酸性亮铜质量的因素[J]. 电镀与精饰, 2001, 23(4): 28-29. WANG Ai-rong. Factors affecting the quality of acidic bright copper coatings on large area articles[J]. Plating and Finishing,2001, 23 (4) : 28-29.(in Chinese) [17] 罗志辉,韦庆敏,刘荣军,等. 摩擦辅助电化学沉积技术的研究 进展[J]. 电镀与环保, 2013, 33(2):1-3. LUO Zhi-hui, WEI Qing-min, LIU Rong-jun,et al.Research progress of abrasion-assisted electrodeposition technology[J]. Electroplating & Pollution Control, 2013, 33(2): 1-3.(in Chinese) |