Design of Integrated High Voltage Planar Switch of Exploding Foil Initiators

doi:10.3969/j.issn.1000-1093.2015.04.008

Abstract

Abstract: In order to decrease the volume and manufacturing cost of exploding foil initiator system, an exploding foil initiator (EFI) with high voltage planar switch is designed. The exploding foil and high voltage planar switch are prepared on the observational side and the reverse side of ceramic substrate, respectively. That substrate and other parts are assembled into an exploding foil initiator, and the electrical explosion performance of the exploding foil initiator is studied. The results indicates that the exploding foil initiator with high voltage planar switch had similar initiating performance as the traditional exploding foil initiator which uses a spark gap switch. The high voltage planar switch could meet the initiating requirement of exploding foil initiator instead of spark gap switch.

Key words: ordnance science and technology, high voltage planar switch, miniaturization, integration, exploding foil initiator

CLC Number:

TJ450.2

ZHOU Mi, TONG Hong-hai, REN Xi, WANG Yin, MENG Qing-ying, LI Ming, MIN Jie. Design of Integrated High Voltage Planar Switch of Exploding Foil Initiators[J]. Acta Armamentarii, 2015, 36(4): 626-630.

References

［1］吕军军,李明愉,曾庆轩，等.爆炸箔起爆器系统的发展[J].科技导报, 2011,29(36):61-65.
LYU Jun-jun, LI Ming-yu, ZENG Qing-xuan,et al. Development research of exploiding foil initiator system [J]. Science & Technology Review, 2011, 29(36):61-65. (in Chinese)
[2] 黄娜.冲击片雷管的参数优化及关键技术研究[D].南京:南京理工大学,2014.
HUANG Na. Research on parameters optimization and key technology of the slapper detonators [D]. Nanjing: Nanjing University of Science and Technology,2014. (in Chinese)
[3] 曾庆轩,郑志猛,李明愉，等.冲击片雷管集成制造方法研究[J].火工品,2011(5):1-3.
ZENG Qing-xuan, ZHENG Zhi-meng, LI Ming-yu, et al. Research on fabriation method of integrated slapper detonator[J]. Initiators & Pyrotecgics, 2011(5):1-3. (in Chinese)
[4] 周密,钱勇,刘燕,等.爆炸箔起爆器桥箔夹角优化设计[J].含能材料,2012,20(1):109-112.
ZHOU Mi, QIAN Yong, LIU Yan, et al. Optimal design of foil bridge included angle of exploding foil initiator[J].Chinese Journal of Energetic Materials, 2012,20(1):109-112. (in Chinese)
[5] 韩克华,任西,秦国圣，等.高压脉冲源输出特性[J].探测与控制学报,2012,34(4):24-29.
HAN Ke-hua, REN Xi, QIN Guo-sheng, et al. Output performance of high voltage pluse power source[J].Journal of Detetion & Control, 2012,34(4):24-29. (in Chinese)
[6] 薛朝妹,党瑞荣. 基于Rogowshi线圈的冲击片雷管检测[J].探测与控制学报, 2012,32(2)：27-30.
XUE Zhao-mei, DANG Rui-rong. Lossless detection method for electric explosive device based on roguish coils[J]. Journal of Detection & Control, 2012, 32(2)：27-30. (in Chinese)
[7] Tucker T J, Stanton P L. Electrical gurney energy: a new concept in modeling of energy transfer from electrically exploded conductors, SAND 75-0244[R]. New Mexico, US: Sandia National Laboratory, 1975.
[8] Keller D V, Penning J R Jr.Exploding foils-the production of plane shock waves and the acceleration of thin plates［M］∥Chace W G, Moore H K, ed. Exploding Wires 2.New York:Plenum Press,1962:263-277.

[1]	QIN Guohua, LOU Weida, LIN Feng, XU Yong. A Novel Method of Stability Judgment and Milling Parameter Optimization Based on Cotes Integration Method and Neural Network [J]. Acta Armamentarii, 2024, 45(2): 516-526.
[2]	CAO Zhengyang, ZHANG Bing, BAI Yixuan, GOU Kenan. Multi-UAV Cooperative Navigation Method Based on Fusion of GNSS/INS/VNS Positioning Information [J]. Acta Armamentarii, 2023, 44(S2): 157-166.
[3]	XUE Yaqiang, PENG Zilong, YU Qiang, ZHANG Chunyu, ZHOU Fulin, LIU Jinwei. Analysis of Acoustic Scattering Characteristics of Underwater Targets Based on Kirchhoff Approximation and Curved Triangular Mesh [J]. Acta Armamentarii, 2023, 44(8): 2424-2431.
[4]	LIU Yi, REN Jihuan, WU Xiang, BO Yuming. Newly Equipped Armored Vehicle Classification Based on Integrated Transfer Learning [J]. Acta Armamentarii, 2023, 44(8): 2319-2328.
[5]	ZHANG Jian, SHEN Lin. Simulation Analysis and Experimental Verification of the Electrical Energy Power System for Underwater Vehicles [J]. Acta Armamentarii, 2023, 44(7): 2101-2113.
[6]	ZHAI Wenyu, QIAN Linfang, CHEN Guangsong. The Kinematic Accuracy Reliability and Reliability Sensitivity Analysis of a Swing Mechanism with the Automatic Loading System of a Cannon [J]. Acta Armamentarii, 2023, 44(4): 1062-1070.
[7]	CHEN Gang， YAO Liya， WANG Guoxin， SHANG Xiwen， CHEN Wang， YAN Yan， MING Zhenjun. A Human-Machine Consensus Formation Method for Robust Decision Making in Battlefield Situation Assessment [J]. Acta Armamentarii, 2022, 43(11): 2953-2964.
[8]	QIAN Linfang, CHEN Guangsong, WANG Mingming. The Effects of Initial State Parameters of Projectiles at Muzzle on Their Ground Dispersion [J]. Acta Armamentarii, 2020, 41(5): 833-841.
[9]	SHEN Shibin, XIE Fei, ZHAO Jing, QIAN Weixing, KANG Guohua, LIU Xixiang. A Signal Demodulation Method for Ultra-tightly Coupled INS/GNSS Navigation System Based on Phase Control [J]. Acta Armamentarii, 2020, 41(3): 495-506.
[10]	ZOU Yuan, JIAO Feixiang, CUI Xing, ZHANG Xudong, ZHANG Bin. A Review on Power Source Technology of Unmanned Ground Vehicles [J]. Acta Armamentarii, 2020, 41(10): 2131-2144.
[11]	PAN Weidong, FAN Yuanxun, LEI Jianjie, CAO Dawei, LU Pengcheng, XU Zhiwei. Effect of Friction on Electric Linear Load Simulator and Research on Friction Suppression [J]. Acta Armamentarii, 2019, 40(10): 2050-2059.
[12]	PAN Xu-chao， SUN Meng-xiao， HE Yong， SHEN Jie， CHEN Hong， ZHANG Jiang-nan. Research on the Application of Shaped Charge Metal Jet in Antenna [J]. Acta Armamentarii, 2018, 39(8): 1457-1465.
[13]	WU Jin-tao, DONG Gang, LI Bao-ming. Application of MPI-based ISAT Accelerated Algorithm in Gaseous Detonation Numerical Simulation [J]. Acta Armamentarii, 2018, 39(5): 934-944.
[14]	CHEN Hao-yu, HONG Ren-kai, CHEN Yong-tao, ZHANG Shi-wen, REN Guo-wu, MO Jun-jie. Mini Momentum Probe Technique for Diagnosis of Micro-spall Fracture of Material [J]. Acta Armamentarii, 2017, 38(9): 1729-1735.
[15]	MAO Ming， LIU Yong， HU Jian-jun. Research on the Overall Design of Integrated Electronic Information System for Tanks and Armored Vehicles [J]. Acta Armamentarii, 2017, 38(6): 1192-1202.