考虑油液黏温特性的电静液作动器流量死区动态逆补偿方法

doi:10.3969/j.issn.1000-1093.2022.02.009

兵工学报 ›› 2022, Vol. 43 ›› Issue (2): 316-327.doi: 10.3969/j.issn.1000-1093.2022.02.009

考虑油液黏温特性的电静液作动器流量死区动态逆补偿方法

韩小霞¹，冯永保¹，谢建¹，魏列江²，王亚强³，魏小玲¹

(1.火箭军工程大学导弹工程学院，陕西西安 710025； 2.兰州理工大学能源与动力工程学院，甘肃兰州 730050；3.中国重型机械研究院股份公司，陕西西安 710032)

上线日期:2022-03-28
通讯作者: 冯永保（1971—），男，教授，博士生导师 E-mail:fyb1213@sina.com
作者简介:韩小霞（1990—），女，博士研究生。E-mail:lyl_hanxiaoxia@163.com
基金资助:
陕西省自然科学基金项目（2019JQ-491）

Dynamic Inverse Compensation Method of Flow Rate Dead-zone of Electro-hydrostatic Actuator Considering Viscosity-temperatureCharacteristics of Oil

HAN Xiaoxia¹， FENG Yongbao¹， XIE Jian¹， WEI Liejiang²， WANG Yaqiang³， WEI Xiaoling¹

(1.College of Missile Engineering, Rocket Force University of Engineering, Xi'an 710025, Shaanxi, China;2.College of Energy and Power Engineering, Lanzhou University of Technology, Lanzhou 730050, Gansu, China；3.China National Heavy Machinery Research Institute Co.,Ltd., Xi'an 710032, Shaanxi, China)

Online:2022-03-28

摘要/Abstract

摘要： 高集成电静液作动器（EHA）在减小体积和质量的同时，带来散热能力差、系统油温上升快等问题，导致油液黏度降低而使EHA的流量死区具有时变特性，给EHA的精确控制增加了难度。针对上述问题，考虑油液黏温特性，建立了EHA流量死区的数学模型，分析了流量死区的变化规律，提出了基于系统模型信息的流量死区动态逆补偿方法，对比分析了不同转速和负载下所提方法的补偿效果，并进行了实验验证。结果表明，EHA的流量死区随温度升高而增大，所提出的动态逆补偿方法在轻载条件下能够较好地补偿EHA的流量死区，有利于提高系统的控制性能。

关键词: 电静液作动器, 流量死区, 动态逆补偿方法, 黏温特性

Abstract: The highly integrated electro-hydrostatic actuator (EHA) has been reduced in size and weight, but the poor heat dissipation and rapid increase in system oil temperature have been brought, thus leading to the time-varying characteristics of flow rate dead-zone of EHA resulting from the reduction of oil viscosity. This makes accurate control of EHA more difficult. For the above problems, a mathematical model of EHA flow rate dead-zone is established, in which the viscosity-temperature characteristics of the oil are considered, and the variation law of flow rate dead-zone is analyzed. Furthermore, a dead-zone dynamic inverse compensation method for flow rate based on the system model information is proposed. The compensation effects of proposed method at different speeds and loads are compared and analyzed, and verified through experiment. The results show that the flow rate dead-zone of EHA increases with the rise in temperature, and the proposed dynamic inverse compensation method can compensate the flow rate dead-zone of EHA under light load conditions, which is conducive to improving the control performance of the system.

Key words: electro-hydrostaticactuator, flowratedead-zone, dynamicinversecompensationmethod, viscosity-temperaturecharacteristics

中图分类号:

TH137.31

韩小霞, 冯永保, 谢建, 魏列江, 王亚强, 魏小玲. 考虑油液黏温特性的电静液作动器流量死区动态逆补偿方法[J]. 兵工学报, 2022, 43(2): 316-327.

HAN Xiaoxia, FENG Yongbao, XIE Jian, WEI Liejiang, WANG Yaqiang, WEI Xiaoling. Dynamic Inverse Compensation Method of Flow Rate Dead-zone of Electro-hydrostatic Actuator Considering Viscosity-temperatureCharacteristics of Oil[J]. Acta Armamentarii, 2022, 43(2): 316-327.

参考文献

［1］ LI K, WANG S P. Multidisciplinary modeling method and simulation for electro-hydrostatic actuator[C]∥Proceedings of IEEE Conference on Industrial Electronics and Applications. Taichung, Taiwan, China: IEEE, 2010.
[2］王岩,郭生荣, 杨乐. 电动静液作动器热力学建模方法及油液温升规律[J]. 北京航空航天大学学报, 2018, 44(8):1596-1602.
WANG Y, GUO S R, YANG L. A thermodynamic modeling method of electro-hydrostatic actuator and law of oil temperature rise[J]. Journal of Beijing University of Aeronautics and Astronautics, 2018, 44(8):1596-1602. (in Chinese)
[3］王旭东, 徐礼林, 姚叶明, 等. 电动静液作动器热特性分析与结构优化[J]. 机床与液压, 2020, 48(1):29-34.
WANG X D, XU L L, YAO Y M, et al. Thermal characteristics analysis and structural optimization of electro-hydrostatic actuator[J]. Machine Tool & Hydraulics, 2020，48(1): 29-34.(in Chinese)
[4］来雨辰, 段嘉兴, 邓君毅.飞机电动静液作动器热力学建模与分析[J]. 机电工程技术, 2020, 49(5):29-31, 88.
LAI Y C, DUAN J X, DENG J Y. Thermodynamic modeling and analysis of aircraft Electro-Hydrostatic Actuator[J]. Mechanical & Electrical Engineering Technology, 2020, 49(5):29-31,88.(in Chinese)
[5］高春伦, 段富海, 关文卿, 等. 基于集总参数的电静液作动器液压系统热分析[J].液压气动与密封, 2020, 40(6):47-50，54.
GAO C L, DUAN F H, GUAN W Q, et al. Thermal analysis of electro-hydrostatic actuator hydraulic system based on lumped parameters[J]. Hydraulics Pneumatics & Seals, 2020,40(6):47-50, 54.(in Chinese)
[6］林建忠. 流体力学[M].第2版.北京：清华大学出版社, 2003.
LIN J Z. Fluid mechanics [M]. 2nd ed. Beijing: Tsinghua University Press, 2003.(in Chinese)
[7］ SUN B, ZHANG X M, SUN K G. The oil temperature controlling of hydraulic pump performance test-system[J]. Key Engineering Materials, 2013, 561: 478-482.
[8］王亚强. 变转速电动静液作动器速度死区及补偿方法研究[D]. 兰州:兰州理工大学, 2019.
WANG Y Q. The Research on speed dead-zone and compensation method of variable speed electrostatic hydraulic actuator[D]. Lanzhou: Lanzhou University of Technology, 2019.(in Chinese)
[9］陈英. 外啮合齿轮泵的间隙优化及振动和噪声的研究[D]. 长春：吉林大学，2004.
CHEN Y. Themost optimization gap of the external gear pumps and the research of vibration and noise[D]. Changchun: Jilin University, 2004.(in Chinese)
[10］陈英, 荆宝德, 王义强. 外啮合齿轮泵内泄漏理论模型的建立及参数优化[J]. 机床与液压, 2007, 35(10):108-110.
CHEN Y, JING B D, WANG Y Q. The foundation and parameters optimization of internal leakage theoretic model on external gear pump[J]. Machine Tool & Hydraulics, 2007, 35(10): 108-110.(in Chinese)
[11］ SHI G L, WANG H J. Thermal-hydraulic model for axial piston pump with leakage and friction and its application[J]. Industrial Lubrication and Tribology, 2019, 71(6): 191176938.
[12］ XU Z B, MIN J Q. Study on improving the dead zone character of electro-hydraulic servo system with dither[C]∥Proceedings of IEEE 2010 International Conference on Digital Manufacturing & Automation. Changsha, China: IEEE< 2010:502-505.
[13］ GU W W, YAO J Y, YAO Z K, et al. Robust adaptive control of hydraulic system with input saturation and valve dead-zone[J]. IEEE Access, 2018, 6: 53521-3532.
[14］王立新, 赵丁选, 刘福才, 等. 基于死区补偿的电液位置伺服系统自抗扰控制[J].中国机械工程, 2021, 32(12):1432-1442.
WANG L X, ZHAO D X, LIU F C, et al. ADRC for electro-hydraulic position servo system based on dead-zone compensation[J]. China Mechanical Engineering, 2021, 32(12):1432-1442.(in Chinese)
[15］ CHEN Z H, YUAN X H, WU X T, et al. Global fast terminal sliding mode controller for hydraulic turbine regulating system with actuator dead zone[J]. Journal of the Franklin Institute, 2019, 356(15): 8366-8387.
[16］ BESSA W M, DUTRA M S, KREUZER E. Sliding mode control with adaptive fuzzy dead-zone compensation of an electro-hydraulic servo-system[J]. Journal of Intelligent and Robotic Systems, 2009, 58(1):3-16.
[17］许益民．电液比例控制系统分析与设计[M]．北京：机械工业出版社，2006．
XU Y M. Analysis and design of electro-hydraulic proportional control system [M]. Beijing: China Machine Press, 2006.(in Chinese)
[18］高立龙, 李九林, 蒋文峰, 等. 工程机械液压缸内泄漏故障检测分析[J]. 液压气动与密封, 2021, 41(1):70-73.
GAO L L, LI J L, JIANG W F,et al. Leak detection and analysis of engineering machinery hydraulic cylinder[J]. Hydraulics Pneumatics & Seal, 2021, 41(1):70-73. (in Chinese)
[19］陈国琳. 液压系统泄漏控制[J]. 液压与气动, 2000(2):33-34.
CHEN G L. The leakage control of Hydraulic system[J]. Chinese Hydraulics and Pneumatics, 2000(2):33-34. (in Chinese)
[20］马晓三. 齿轮泵内泄漏途径及控制方法研究[J]. 机床与液压, 2014, 42(20):156-158.
MA X S. Research on way and control method of leakage in gear pump[J]. Machine Tool & Hydraulics, 2014, 42(20):156-158.(in Chinese)
[21］盛敬超. 液压流体力学[M]. 北京：机械工业出版社，1980:1-15.
SHENG J C. Hydraulic fluid mechanics[M]. Beijing: China Machine Press, 1980:1-15.(in Chinese)
[22］ H. E. 梅里特. 液压控制系统 [M]. 陈燕庆,译. 北京: 科学出版社, 1967: 6-23.
MERRITT H E. Hydraulic control systems [M].CHEN Y Q,translated. Beijing: Science Press, 1967:6-23.
[23］薛晓虎. 液压系统缝隙内流体泄漏特性的分析[J]. 机械工程学报, 2004, 40(6):75-80.
XUE X H. Analysis on the fluid leakage characteristic in gaps of the hydraulic system[J].Chinese Journal of Mechanical Engineering, 2004, 40(6):75-80.(in Chinese)
[24］李晓刚. 三相永磁同步电机伺服控制系统设计与仿真[D]. 南京：南京理工大学, 2012.
LI X G. Design and simulation of three-phase permanent magnet synchronous motor servo control system[D]. Nanjing: Nanjing University of Science and Technology, 2012.(in Chinese)
[25］周俊杰, 苑士华, 荆崇波.考虑空化效应的齿轮泵流量特性研究[J]. 兵工学报, 2020, 41(1):189-195.
ZHOU J J, YUAN S H, JING C B. Research on flow characteristics of gear pump considering cavitation effect[J]. Acta Armamentarii, 2020, 41(1):189-195.(in Chinese)

考虑油液黏温特性的电静液作动器流量死区动态逆补偿方法

Dynamic Inverse Compensation Method of Flow Rate Dead-zone of Electro-hydrostatic Actuator Considering Viscosity-temperatureCharacteristics of Oil

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价