[1] JIANG S N, CHEN X Y, GU J M, et al. Friction moment analysis of space gyroscope bearing with ribbon cage under ultra-low oscillatory motion[J]. Chinese Journal of Aeronautics, 2014, 27(5): 1301-1311. [2] KOMBA E H, MASSI F, BOUSCHARAIN N, et al. Experimental damage analysis in high loaded oscillating bearings[J]. Tribology International, 2016, 102: 507-515. [3] TONAZZI D, KOMBA E. H, MASSI F, et al. Numerical analysis of contact stress and strain distributions for greased and ungreased high loaded oscillating bearings[J]. Wear, 2017, 376/377(Part B): 1164-1175. [4] MASSI F, BUSCHARAIN N,MILANA S, et al. Degradation of high loaded oscillating bearings: numerical analysis and comparison with experimental observations[J]. Wear, 2014, 317(1/2):141-152. [5] GHEZZI I, KOMBA E W H, TOBAZZI D, et al. Damage evolution and contact surfaces analysis of high-loaded oscillating hybrid bearings[J]. Wear, 2018, 406/407: 1-12. [6] OKORN I, NAGODE M, KLEMENC J. Analysis on damage to rolling bearings at small turning angles[J]. Journal of Mechanical Engineering, 2018, 64(4): 209-215. [7] GLAESER W A. The performance of heavily loaded oscillating roller bearings from 300 ℉ to 600 ℉[J]. ASLE Transactions, 1960, 3(2): 203-207. [8] STAMMLER M, REUTER A, POLL G. Cycle counting of roller bearing oscillations-case study of wind turbine individual pitching system[J]. Renewable Energy Focus, 2018, 25:40-47. [9] 吴正海, 徐颖强, 邓四二, 等. 高速脂润滑圆锥滚子轴承保持架动态稳定性分析[J]. 振动与冲击, 2019, 38(10): 49-57. WU Z H, XU Y Q, DENG S E, et al. Dynamic stability of cages in high-speed tapered roller bearings with grease lubrication[J]. Journal of Vibration and Shock, 2019, 38(10): 49-57. (in Chinese) [10] 王春洁, 周延泽, 陆震. 发动机主轴承保持架碰撞振动的力学模型与分析[J]. 机械科学与技术, 2000, 19(6): 870-871. WANG C J, ZHOU Y Z, LU Z. Dynamic model and analysis on impact vibration of cage with main roller bearing in engine[J]. Mechanical Science and Technology, 2000, 19(6): 870-871. (in Chinese) [11] 周延泽, 陆震. 高速球轴承球/保持架碰撞模型与冲击特性研究[J]. 机械设计, 2001,18(7): 33-36. ZHOU Y Z, LU Z. Research on impacting models and characteristics of ball against retainer in high-speed ball bearing[J]. Journal of Machine Design, 2001,18(7): 33-36. (in Chinese) [12] CUI Y C, DENG S E,ZHAG W H, et al. The impact of roller dynamic unbalance of high-speed cylindrical roller bearing on the cage nonlinear dynamic characteristics[J]. Mechanism and Machine Theory, 2017, 118: 65-83. [13] CUI Y C, DENG S E, DENG K W, et al. Experimental study on impact of roller imbalance on cage stability[J]. Chinese Journal of Aeronautics, 2021, 34(10): 248-264. [14] 邓四二, 顾金芳, 崔永存, 等. 高速圆柱滚子轴承保持架动力学特性分析[J]. 航空动力学报, 2014, 29(1): 207-215. DENG S E, GU J F, CUI Y C, et al. Analysis on dynamic cha- racteristics of cage in high-speed cylindrical roller bearing[J]. Journal of Aerospace Power, 2014, 29(1): 207-215. (in Chinese) [15] 孙雪, 邓四二, 陈国定, 等. 弹性支承下圆柱滚子轴承保持架稳定性分析[J]. 航空动力学报, 2018, 33(2): 487-496. SUN X, DENG S E, CHEN G D, et al. Analysis of cage's stability in a cylindrical roller bearing with elastic support [J]. Journal of Aerospace Power, 2018, 33(2): 487-496. (in Chinese) [16] ZHANG W H, DENG S E, CHEN G D, et al. Impact of lubricant traction coefficient on cage's dynamic characteristics in high-speed angular contact ball bearing[J]. Chinese Journal of Aeronautics, 2017, 30(2): 827-835. [17] 李红涛, 张文虎, 邓四二, 等.停止阶段圆柱滚子轴承保持架应力分析[J].机械科学与技术, 2018,37(2): 172-179. LI H T, ZHANG W H, DENG S E, et al. Study on cage stress of cylindrical roller bearing at stop stage[J]. Mechanical Science and Technology for Aerospace Engineering, 2018,37(2): 172-179. (in Chinese) [18] 涂文兵, 何海斌, 刘乐平, 等. 角接触球轴承在减速过程中的保持架动态特性分析[J]. 机械传动, 2019, 43(8): 125-129. TU W B, HE H B, LIU L P, et al. Analysis on cage dynamic characteristic of angular contact ball bearing during deceleration[J]. Journal of Mechanical Transmission, 2019, 43(8): 125-129. (in Chinese) [19] 罗丫, 何海斌. 加速过程角接触球轴承保持架动态特性分析[J]. 机械强度, 2020, 42(4): 907-912. LUO Y, HE H B. Analysis on cage dynamic characteristics of angular contact ball bearing during acceleration[J]. Journal of Mechanical Strength, 2020, 42(4): 907-912. (in Chinese) [20] 郑德志, 王黎钦, 古乐, 等. 非平稳状态下高速滚动轴承的失效研究[J]. 中国机械工程, 2007, 18(10): 1214-1217. ZHENG D Z, WANG L Q, GU L, et al. Failure mode of high speed rolling bearing under unstable running conditions[J]. China Mechanical Engineering, 2007, 18(10): 1214-1217. (in Chinese) [21] 屈驰飞, 杨震, 谢鹏飞, 等. 变速运转球轴承保持架的动态性能仿真分析[J]. 轴承, 2017(5): 26-29. QU C F, YANG Z, XIE P F, et al. Simulation analysis of dynamic performance of ball bearing cage with variable speed operation[J]. Bearing, 2017(5): 26-29. (in Chinese) [22] 李峰, 邓四二, 张文虎. 频繁摆动工况下球轴承打滑特性研究[J]. 机械工程学报, 2021, 57(1):168-178. LI F, DENG S E, ZHANG W H. Skidding characteristics of ball bearings withstanding a frequent oscillating condition[J]. Journal of Mechanical Engineering, 2021, 57(1):168-178. (in Chinese) [23] 李峰, 张文虎, 徐曼君, 等. 频繁摆动工况下深沟球轴承摩擦力矩特性分析[J].轴承, 2021(2):1-7. LI F, ZHANG W H, XU M J, et al. Analysis on friction torque characteristics of deep groove ball bearings under frequent swing condition[J].Bearing, 2021(2):1-7. (in Chinese) [24] 李峰. 摆动机体球轴承动态特性研究[D]. 洛阳:河南科技大学,2020. LI F. Research ondynamic characteristics of oscillating ball bearings for aircraft[D].Luoyang:Henan University of Science and Technology,2020. (in Chinese) [25] 邓四二, 贾群义, 薛进学. 滚动轴承设计原理[M]. 第2版. 北京: 中国标准出版社, 2014: 258-260. DENG S E, JIA Q Y, XUE J X. Design theory of rolling bearings[M]. 2nd ed. Beijing:Standards Press of China, 2014: 258-260. (in Chinese) [26] GEAR C. Simultaneous numerical solution of differential algebraic equations[J]. IEEE Transactions on Circuit theory, 1971,18(1): 89-95.
|