多分支非圆齿轮无级变速机构设计与分析

doi:10.3969/j.issn.1000-1093.2021.12.002

摘要/Abstract

摘要： 无级变速传动是车辆传动系统的重要组成部分。结合非圆齿轮传动特性，提出一种新型多分支非圆齿轮无级变速机构，采用非圆齿轮副、差速机构与传动选择机构的组合实现无级变速传动，且最终传动比取决于两对非圆齿轮副之间的相位角。分析多分支非圆齿轮无级变速机构的传动原理，针对单对非圆齿轮副，分别进行节曲线、齿廓和平衡特性设计，并基于仿真加工得到非圆齿轮齿廓与三维实体模型。通过ADAMS软件仿真和传动实验，将该机构整体传动比特性理论结果分别与仿真和实验结果进行对比，机构整体传动比仿真和实验结果与理论值的最大误差分别约为4.5%和5.6%；通过非圆齿轮加工与传动实验，对其传动比特性进行理论、仿真和实验对比，齿轮副传动比仿真和实验结果与理论值的最大误差分别约为3.5%和6.3%. 考虑加工误差、装配误差与测量误差等影响，仿真和传动实验的误差均在合理误差范围内，验证了理论分析方法的正确性。

关键词: 非圆齿轮, 无级变速, 差速机构, 仿真和传动实验

Abstract: Continuously variable transmision is an important component of vehicle transmision system. A new type of multi-branch non-circular gear continuously variable transmission mechanism is proposed based on the transmission characteristics of non-circular gear. The continuously variable transmission is realized by the combination of non-circular gear pair，differential mechanism and transmission selection mechanism，and the final transmission ratio depends on the phase angle between two pairs of non-circular gears. The transmission principle of multi-branch non-circular gear continuously variable transmission mechanism is analyzed. The pitch curve，tooth profile and balancing characteristics are designed for non-circular gear pair，and the tooth profile and three-dimensional solid model of non-circular gear are obtained through simulation processing. The overall transmission ratio characteristics of the mechanism are compared and analyzed in theory，simulation and experiment through the ADAMS simulation and transmission experiment，and the maximum simulated and experimental errors of overall transmission ratio are about 4.5% and 5.6%, respectively. The transmission ratio characteristics of single gear pair are compared through the non-circular gear manufacturing and transmission experiment，and the maximum simulated and experimental errors of transmission ratio of gear pair are about 3.5% and 6.3%, respectively. Considering the influences of manufacturing error，assembly error and measurement error， the simulated and transmission experimental errors are all within the reasonable error range，which verifies the correctness of the theoretical analysis method.

Key words: non-circulargear, continuouslyvariabletransmission, differentialmechanism, simulationandtransmissionexperiment

中图分类号:

邢庆坤，林超，喻永权，胡亚楠. 多分支非圆齿轮无级变速机构设计与分析[J]. 兵工学报, 2021, 42(12): 2543-2554.

XING Qingkun， LIN Chao， YU Yongquan， HU Yanan. Design and Analysis of Multi-branch Non-circular Gear Continuously Variable Transmission Mechanism[J]. Acta Armamentarii, 2021, 42(12): 2543-2554.

参考文献［1］

［1］

LITVIN F L，FUENTES-AZNAR A，GONZALEZ-PEREZ I，et al.Noncircular gears: design and generation［M］.Cambridge，UK: Cambridge University Press，2009.［2］ MUNDO D，GATTI G，DOONER D B.Optimized fivebar linkages with non-circular gears for exact path generation［J］.Mechanism and Machine Theory，2009，44(4):751-760.［3］ LIU J Y，CHANG S L，MUNDO D.Study on the use of a non-circular gear train for the generation of figure-8 patterns［J］.Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science，2006，220(8):1229-1236.［4］刘大伟，任廷志.由补偿法构建封闭非圆齿轮节曲线［J］.机械工程学报，2011，47(13):147-152.LIU D W，REN T Z.Creating pitch curve of closed noncircular gear by compensation method［J］.Journal of Mechanical Engineering，2011，47(13):147-152.(in Chinese)［5］ TERADA H，ZHU Y，SUZUKI M，et al.Developments of a knee motion assist mechanism for wearable robot with a non-circular gear and grooved cams［M］∥LOVASZ E C, CORVES B. Mechanisms and Machine Science. Heidelberg, Germany: Springer，2012:69-76. ［6］ MODLER K H，LOVASZ E C，BAR G F，et al.General method for the synthesis of geared linkages with noncircular gear［J］.Mechanism and Machine Theory，2009，44(4):726-738.［7］ EMURA T，ARAKAWA A.A new steering mechanism using noncircular gear［J］.JSME International Journal， 1992，35(4): 604-610. ［8］ ALEXANDRU P，MACAVEIU D，ALEXANDRU C.A gear with translational wheel for a variable transmission ratio and applications to steering box［J］.Mechanism and Machine Theory，2012，52(2): 267-276.［9］ MUNDO A.Geometric design of a planetary gear train with non-circular gear［J］.Mechanism and Machine Theory，2006，41(4): 456-472.［10］ HEBBALE K，LI D X，ZHOU J，et al.Study of a noncircular gear infinitely variable transmission［C］∥Proceedings of ASME Dynamic Systems & Control Conference. San Antonio，TX，US: ASME，2014.［11］ FREUDENSTEIN F，CHEN C K.Variable-ratio chain drives with noncircular sprockets and minimum slack theory and application［J］.Journal of Mechanical Design，1991，113(3):253-262.［12］ OTTAVIANO E，MUNDO D，DANIEL G，et al.Numerical and experimental analysis of non-circular gears and cam-follower systems as function generators［J］.Mechanism and Machine Theory，2008，43(8):996-1008.［13］林超，张雷，张志华.一种新型非圆锥齿轮副的传动原理及其齿面求解［J］.机械工程学报，2014，50(13): 66-72.LIN C，ZHANG L，ZHANG Z H.Transmission theory and tooth surface solution of a new type of non-circular bevel gears［J］.Journal of Mechanical Engineering，2014，50(13):66-72.(in Chinese)［14］林超，侯玉杰，龚海，等.高阶变性椭圆锥齿轮传动模式设计与分析［J］.机械工程学报，2011，47(13):131-139.LIN C，HOU Y J，GONG H，et al. Design and analysis of transmission mode for high-order deformed elliptic bevel gears［J］.Journal of Mechanical Engineering， 2011，47(13):131-139. (in Chinese)［15］郑方焱，张争艳，陈定方，等.新型非圆齿轮分度装置［J］.中国机械工程，2014，25(22):2997-3002.ZHENG F Y，ZHANG Z Y，CHEN D F，et al. A new type of non-circular gear indexing device［J］.China Mechanical Engineering，2014，25(22):2997-3002. (in Chinese)［16］ ZHENG F Y，HUA L，HAN X H，et al. Synthesis of indexing mechanisms with non-circular gears［J］.Mechanism and Machine Theory，2016，105:108-128.［17］林超，夏锡光，邢庆坤，等.非圆齿轮型间歇转动机构的设计与运动特性分析［J］.中国机械工程，2020，31(10): 1142-1148.LIN C，XIA X G，XING Q K，et al.Design and kinematic characteristics analysis of an intermittent rotation mechanism based on non-circular gears［J］.China Mechanical Engineering，2020，31(10): 1142-1148.(in Chinese)［18］赵振峰，赵长禄，张付军.一种新型混合动力系统:液压自由活塞发动机整体推进系统［J］.兵工学报，2009，30(6):773-778.ZHAO Z F，ZHAO C L，ZHANG F J.A new type of hybrid-driven power system: integrated propulsion system based on hydraulic free piston engine［J］. Acta Armamentarii，2009，30(6):773-778. (in Chinese)［19］郭伟，刘艳芳，徐向阳，等.高扭矩无级变速器原理及设计［J］.兵工学报，2011，32(9):1065-1070.GUO W，LIU Y F，XU X Y，et al. Principle and design of high torque continuously variable transmission［J］.Acta Armamentarii，2011，32(9):1065-1070.(in Chinese)［20］周祖焕.齿轮无级变速原理［J］.机械传动，2001，25(2):31-33.ZHOU Z H.The principle of gear continuously variable transmission［J］.Journal of Mechanical Transmission，2001,25(2):31-33.(in Chinese)［21］孙科，郑方焱，杨公波，等.一种新型非圆锥齿轮无级变速装置［J］.机械设计，2013，30(8): 44-48.SUN K，ZHENG F Y，YANG G B，et al. A new type of non-circular bevel gear CVT［J］.Journal of Mechanical Design，2013，30(8): 44-48. (in Chinese)［22］黄忠超，蓝兆辉.节曲线封闭的非圆齿轮传动比函数设计［J］.机械传动，2011，35(11):30-33.HUANG Z C，LAN Z H.Design of transmission ratio function of non-circular gear of closed pitch curve［J］.Journal of Mechanical Transmission，2011，35(11):30-33.(in Chinese)

[1]	郭伟，刘艳芳，徐向阳，董鹏，王书翰. 高扭矩无级变速器原理及设计[J]. 兵工学报, 2011, 32(9): 1065-1070.
[2]	1:华顺刚;2:刘修骥. 无级变速兼转向的车用液压机械综合传动系理谱规律研究[J]. 兵工学报, 1997, 18(1): 1-4.