飞秒激光烧蚀黑索今的分子动力学模拟

doi:10.3969/j.issn.1000-1093.2021.01.025

摘要/Abstract

摘要： 利用飞秒激光的超短脉冲时间和超高能量密度的特点，可以实现对炸药的精密加工和纳米含能材料的制备。深入认识飞秒激光烧蚀炸药机理是发展飞秒激光加工技术的基础。采用反应分子动力学方法，基于ReaxFF/lg反应力场，对不同飞秒激光能量作用黑索今(RDX)过程进行分子动力学模拟，分析RDX初始分解反应路径、粒子扩散逃逸特征，研究不同飞秒激光能量作用下RDX的烧蚀机制。结果表明：在不同飞秒激光能量作用下，RDX的烧蚀机制不同。当激光能量较高时(激光能量1.0 mJ/pulse,激光能量密度51 J/cm²)，RDX瞬间发生分解反应，产生高温高压等离子体，产物中有大量的单原子、离子以及小分子产物；当激光能量较低时(激光能量0.2 mJ/pulse,激光能量密度10.2 J/cm²)，RDX主要以完整分子形式气化扩散逃逸，炸药以光机械烧蚀机制去除；在飞秒激光烧蚀炸药过程中，逃逸的粒子速度极高，粒子难以向未烧蚀区域传递能量，不会引发热扩散效应，因此能够实现对炸药的冷加工。

关键词: 黑索今, 分子动力学, 飞秒激光, ReaxFF/lg反应力场

Abstract: The femtosecond laser can be used for the precise machining of explosives and the preparation of energetic nanomaterials because of its ultra-short pulse duration and ultra-high energy density. Deep understanding of the femtosecond laser ablation mechanism of energetic materials is the basis for rational use of femtosecond laser machining technology. The molecular dynamics calculations of RDX ablated by femtosecond laser were conducted based on ReaxFF/lg reactive force field. The decomposition reaction pathway and particle diffusion of RDX were analyzed, and the ablation mechanism of RDX under different femtosecond laser energies was discussed. Results show that the ablation mechanisms of RDX are different under the action of different femtosecond laser energies. When the laser energy is high enough (e.g., 1.0 mJ/pulse, 51 J/cm²), RDX is rapidly decomposed to generate high-temperature and high-pressure plasma. In addition, there are many single atoms, ions and small molecular fragments in the products; when the laser energy is relatively low (e.g., 0.2 mJ/pulse, 10.2 J/cm²), the explosive is removed by a photomechanical ablation mechanism, RDX in laser focal zone escapes as its starting molecular structure. During the femtosecond laser ablation, the high-speed particles in focal zone quickly escape outward and become difficult to transfer the energy to the surroundings, by which the explosive can be removed effectively without causing thermal diffusion. Therefore, the “cold” machining of explosives can be realized.

Key words: RDX, moleculardynamics, femtosecondlaser, ReaxFF/lg

中图分类号:

TQ564.3
TJ55

伍俊英，杨利军，李姚江，陈朗. 飞秒激光烧蚀黑索今的分子动力学模拟[J]. 兵工学报, 2021, 42(1): 214-224.

WU Junying, YANG Lijun, LI Yaojiang, CHEN Lang. Reactive Molecular Dynamics Simulation of Microscopic Mechanisms of Femtosecond Laser Ablation of RDX[J]. Acta Armamentarii, 2021, 42(1): 214-224.

参考文献

［1］ SATOSHI K, SUN H B, TOMOKAZU T, et al. Finer features for functional microdevices [J]. Nature, 2001, 412(6848):697-698.
[2］ YOSHIKI N, TATSUO O, MITSUO M. Fabrication of dot matrix, comb, and nanowire structures using laser ablation by interfered femtosecond laser beams [J]. Applied Physics Letters, 2002, 81(22): 4239-4241.
[3］ BORIS N C, CARSTEN M, STEFAN N, et al. Femtosecond, picosecond and nanosecond laser ablation of solids[J]. Applied Physics A, 1996, 63(2): 109-115.
[4］王清月. 飞秒激光在前沿技术中的应用[M]. 北京: 国防工业出版社, 2015.
WANG Q Y. Femtosecond laser applications in advanced technologies [M]. Beijing: National Defense Industry Press, 2015.(in Chinese)
[5］ CARSTEN M, BORIS N C, STEFAN N, et al. Short-pulse laser ablation of solid targets [J]. Optics Communications, 1996, 129(1/2): 134-142.
[6］陈明华, 卢斌, 李成国, 等. 飞秒激光在含能材料加工中的应用[J]. 火工品, 2005(5): 42-45.
CHEN M H, LU B, LI C G, et al. The application of femtosecond laser in energetic materials' machining [J]. Initiators & Pyrotechnics, 2005(5):42-45.(in Chinese)
[7］ ROESKE Jr F, BANKS R E, ARMSTRONG J P, et al. Laser cutting of pressed explosives: UCRL-JC-128373-Rev.1 [R]. Livermore, CA, US: Lawrence Livermore National Laboratory, 1998.
[8］ ROOS E V, BENTEROU J J, LEE R S, et al. Femtosecond laser interaction with energetic materials[J]. Proceedings of SPIE, High-Power Laser Ablation IV, 2002, 4760: 415-423.
[9］ PALMER J A, WELLE E J. An ultrashort pulse laser lathe for axisymmetric micromachining of explosives [J]. Proceedings of SPIE, Commercial and Biomedical Applications of Ultrafast Lasers VII, 2007, 6460:6460015.
[10］ MCGRANE S D, GRIECO A, RAMOS K J, et al. Femtosecond micromachining of internal voids in high explosive crystals for studies of hot spot initiation [J]. Journal of Applied Physics, 2009, 105(7): 073505.
[11］ WELLE E J,TAPPAN A S,PALMER J. Ultrashort-pulse laser generated nanoparticles of energetic materials: US7767931[P]. 2010-08-03.
[12］ WU C P, THOMAS D A, LIN Z B, et al. Runaway lattice-mismatched interface in an atomistic simulation of femtosecond laser irradiation of Ag film-Cu substrate system [J]. Applied Physics A, 2011, 104(3): 781-792.
[13］杨镇，刘海，何远航. 飞秒激光烧蚀含能材料的分子动力学模拟 [J]. 物理化学学报，2016, 32(8): 1977-1982.
YANG Z, LIU H, HE Y H. Molecular dynamics simulations of femtosecond laser ablation of energetic materials [J]. Acta Physico-Chimica Sinica, 2016, 32(8): 1977-1982.(in Chinese)
[14］ CADY H H, LARSON A C, CROMER D T. The crystal structure of α-HMX and a refinement of the structure of β-HMX [J]. Acta Crystallographica, 1963, 16(7): 617-623.
[15］ VAN DUIN A C T, DASGUPTA S, LORANT F,et al. ReaxFF: a reactive force field for hydrocarbons [J]. Journal of Physical Chemistry A, 2001, 105(41): 9396-9409.
[16］ LIU L C, LIU Y, SERGEY V Z, et al. ReaxFF-lg: correction of the ReaxFF reactive force field for London dispersion, with applications to the equations of state for energetic materials[J]. Journal of Physical Chemistry A, 2011, 115(40): 11016-11022.
[17］ AMORUSO S, AUSANIO G, BRUZZESE R, et al. Characterization of laser ablation of solid targets with near-infrared laser pulses of 100 fs and 1 ps duration [J]. Applied Surface Science, 2006, 252(13):4863-4870.
[18］ PFEIFFER H G, LIEBHAFSKY HE A. The origins of Beer's law [J]. Journal of Chemical Education, 1951, 28(3): 123.
[19］ IKESHOJI T, HAFSKJOLD B. Non-equilibrium molecular dynamics calculation of heat conduction in liquid and through liquid- gas interface [J]. Molecular Physics, 1994, 81(2): 251-261.
[20］ WIRNSBERGER P, FRENKEL D, DELLAGO C. An enhanced version of the heat exchange algorithm with excellent energy conservation properties [J]. The Journal of Chemical Physics, 2015, 143(12): 124104.
[21］ PERRY M D, STUART B C, BANKS P S, et al. Laser machining of explosives: US6150630 [P]. 2000-11-21.
[22］ CHEN X, GOLDSMITH C F. Predictive kinetics for the thermal decomposition of RDX [J]. Proceedings of the Combustion Institute, 2019, 37(3): 3167-3173.
[23］ YURIY T, ANDREY T, ANATOLIY A, et al. Interaction of laser radiation with explosives, applications and perspectives[M]∥YAMANOUCHI K, TUNIK S, MAKAROV V. Progress in Photon Science. Cham, Switzerland: Springer, 2019: 493-511.



[1]	赵聘，陈朗，李金河，鲁建英，伍俊英. 聚能射流侵彻隔板形成的前驱冲击波起爆不同温度炸药特性[J]. 兵工学报, 2021, 42(1): 45-55.
[2]	秦金凤，赵雪，钱华，芮久后. 高致密球形黑索今晶体结构对高聚物粘结炸药安全性能的影响[J]. 兵工学报, 2020, 41(3): 481-487.
[3]	荣吉利，赵自通，冯志伟，韦辉阳，潘昊，徐洪涛，辛鹏飞. 黑索今基含铝炸药水下爆炸性能的实验研究[J]. 兵工学报, 2019, 40(11): 2177-2183.
[4]	杭贵云，余文力，王涛，王金涛，苗爽. 奥克托今/3-硝基-1，2，4-三唑-5-酮共晶炸药晶体缺陷的分子动力学研究[J]. 兵工学报, 2019, 40(1): 49-57.
[5]	王超，李淑娟，柴鹏，严俊超，李言. 单晶SiC微切削机理分子动力学建模与仿真研究[J]. 兵工学报, 2018, 39(8): 1648-1654.
[6]	张伟, 周霖, 张向荣, 杨琰鹏, 曹同堂. 2,4-二硝基茴香醚基含铝熔铸炸药爆轰临界直径的实验研究[J]. 兵工学报, 2017, 38(4): 690-694.
[7]	赵倩，聂建新，王秋实，段晓瑜. 含铝炸药水下爆炸及其对舰船毁伤的数值模拟[J]. 兵工学报, 2017, 38(2): 298-304.
[8]	齐晓飞，谢五喜，严启龙，刘庆，刘春. 中性聚合物键合剂与奥克托今的界面作用[J]. 兵工学报, 2017, 38(10): 1942-1949.
[9]	晋苗苗，罗运军. 硝化棉/黑索今纳米复合含能材料的制备与热性能研究[J]. 兵工学报, 2014, 35(6): 822-827.
[10]	齐晓飞1，张晓宏1，李吉祯1，刘芳莉1，宋振伟1，张军平2. NC/NG共混体系的分子动力学模拟研究[J]. 兵工学报, 2013, 34(1): 93-99.
[11]	项大林1，荣吉利1，李健1,2，冯晓军3，王浩3. 黑索今基含铝炸药的铝氧比对爆轰性能及其水下爆炸性能的影响[J]. 兵工学报, 2013, 34(1): 45-50.
[12]	芮久后，赵雪. 高致密球形黑索今晶体的制备和性能[J]. 兵工学报, 2013, 34(1): 41-44.
[13]	林鹤，张琳，朱顺官，李洪珍，彭新华. HMX/FOX-7共晶炸药分子动力学模拟[J]. 兵工学报, 2012, 33(9): 1025-1030.