[1] Suresha B, Kumar K S, Seetharamu S, et al. Friction and dry sliding wear behavior of carbon and glass fabric reinforced vinyl ester composites [J]. Tribology International, 2010, 43(3): 602-609. [2] Germaneau A, Peyruseigt F, Mistou S, et al. 3D mechanical analysis of aeronautical plain bearings: validation of a finite element model from measurement of displacement fields by digital volume correlation and optical scanning tomography [J]. Optics and Lasers in Engineering, 2010, 48(6): 676-683. [3] Lin J, Pulido J, Asplund M. Reliability analysis for preventive maintenance based on classical and Bayesian semi-parametric degradation approaches using locomotive wheel-sets as a case study[J]. Reliability Engineering and System Safety, 2015,134:143-156. [4] 涂宏茂, 孙志礼, 钱云鹏,等. 引信微机电安全系统的可靠性分析与改进[J]. 兵工学报, 2017, 38(4): 664-672. TU Hong-mao, SUN Zhi-li, QIAN Yun-peng, et al. Reliability analysis and improvement of MEMS-based safety and arming device in fuze[J]. Acta Armamentarii, 2017, 38(4): 664-672.(in Chinese) [5] Ahmed H, Chateauneuf A. Optimal number of tests to achieve and validate product reliability [J]. Reliability Engineering and System Safety, 2014,131: 242-250. [6] 李大伟, 阮旻智, 尤焜. 基于可靠性增长的武器系统可靠性鉴定试验方案研究[J]. 兵工学报, 2017, 38(9): 1815-1821. LI Da-wei, RUAN Min-zhi, YOU Kun. Weapon system reliability qualification test scheme based on reliability growth[J]. Acta Armamentarii, 2017, 38(9): 1815-1821.(in Chinese) [7] 邱明, 周大威, 庞晓旭. 织物衬垫编织工艺对自润滑关节轴承摩擦学性能的影响[J].兵工学报, 2017, 38(9): 1867-1872. QIU Ming, ZHOU Da-wei, PANG Xiao-xu. Effect of weave process of fabric liner on tribological properties of self-lubricating spherical plain bearing[J]. Acta Armamentarii, 2017, 38(9): 1867-1872.(in Chinese) [8] Qiu M, Miao Y W, Li Y C, et al. Film-forming mechanisms for self-lubricating radial spherical plain bearings with hybrid PTFE/aramid fabric liners modified by ultrasonic [J]. Tribology International, 2015,87: 132-138. [9] SKF Corporation. SKF spherical plain bearings and rod ends [DB/OL]. [2017-10-26]. http:∥www.acornbearings.co.uk/downloads/catalogues/bearings/spherical-plain-bearings/skf-spherical- plain-bearings-and-rod-ends.pdf.
[10] NTN Corporation. NTN spherical plain bearings [DB/OL]. [2017-10-26]. http:∥www.ntnglobal.com/en/products/catalog/pdf/5301E.pdf. [11] Schaeffler KG. Spherical plain bearings, plain bushes, rod ends [DB/OL]. [2017-10-26]. http:∥www.schaeffler.com/remotemedien/media/_shared_media/08_media_library/01_publications/schaeffler_2/catalogue_1/downloads_6/238_de_en_1.pdf. [12] FLURO Corporation. Rod ends and spherical plain bearings [DB/OL]. [2017-10-26]. http:∥technobearing.ru/d/45604/d/fluro.pdf. [13] 中华人民共和国工业和信息化部. JB/T 8565—2010 关节轴承 额定动载荷与寿命[S]. 北京: 机械工业出版社, 2010. Ministry of Industry and Information Technology of the People's Republic of China. JB/T 8565—2010 Rated dynamic load and life of spherical plain bearing[S]. Beijing: China Machine Press, 2010. (in Chinese) [14] 卢建军,邱明,李迎春.自润滑向心关节轴承磨损寿命模型[J].机械工程学报,2015,51(11):56-63. LU Jian-jun, QIU Ming, LI Ying-chun. Wear life models for self-lubricating radial spherical plain bearings [J]. Journal of Mechanical Engineering, 2015, 51(11): 56-63. (in Chinese) [15] 张详坡, 尚建忠, 陈循, 等.自润滑关节轴承磨损寿命模型[J].国防科技大学学报,2013,35(6):53-59. ZHANG Xiang-po, SHANG Jian-zhong, CHEN Xun, et al. Wear-life models for self-lubricating spherical plain bearing [J]. Journal of National University of Defense Technology, 2013,35(6): 53-59. (in Chinese) [16] 于佳伟, 郑松林, 冯金芝, 等. 某轿车前副车架服役载荷模拟试验加速方法研究[J].机械工程学报, 2016, 52(22): 112-120. YU Jia-wei, ZHENG Song-lin, FENG Jin-zhi, et al. Research on accelerated testing method for the service-simulation fatigue test of automotive front sub-frame[J]. Journal of Mechanical Engineering, 2016, 52(22): 112-120. (in Chinese) [17] 卢建军, 邱明, 李迎春. 自润滑向心关节轴承加速寿命试验及寿命分析[J]. 机械传动, 2016, 40(10): 105-109. LU Jian-jun, QIU Ming, LI Ying-chun. Accelerated life test and life analysis of self-lubricating radial spherical plain bearing[J]. Journal of Mechanical Transmission, 2016, 40(10): 105-109. (in Chinese) [18] 河南科技大学. 复合摆动式关节轴承寿命试验机: 中国, CN103323241B[P]. 2013-09-25. Henan University of Science and Technology. Machine for combined swivel and tilt motion for spherical plain bearings: China, CN103323241B[P].2013-09-25. (in Chinese) [19] 中华人民共和国国家发展和改革委员会. JB/T 10860—2008 关节轴承 动载荷与寿命试验规程[S]. 北京: 机械工业出版社, 2008. National Development and Reform Commission of the People's Republic of China. JB/T 10860—2008 Spherical plain bearings-test code for dynamic load and life [S]. Beijing: China Machine Press, 2008. (in Chinese) [20] 国家标准总局.GB 2689.1—1981 恒定应力寿命试验和加速寿命试验方法总则[S]. 北京:中国标准出版社,1981. National Bureau of Standards of People's Republic of China. GB 2689.1— 1981 Constant stress life test and accelerated life test-general rules[S]. Beijing: Standards Press of China, 1981. (in Chinese) [21] 中国电子技术标准化研究所. 可靠性试验用表:增订本 [M].北京:国防工业出版社,1987. The Chinese Electronics Standardization Institute. Reliability test tables (revised edition)[M]. Beijing: National Defense Industry Press, 1987. (in Chinese) [22] 赵帅帅, 陈永祥, 贾业宁, 等. 基于修正Coffin-Manson模型的加速寿命试验设计与评估[J]. 强度与环境, 2013, 40(4): 52-58. ZHAO Shuai-shuai, CHEN Yong-xiang, JIA Ye-ning, et al. Design and assessment of accelerated life testing based on modified Coffin-Manson model [J]. Structure & Environment Engineering, 2013, 40(4): 52-58. (in Chinese)
第39卷 第7期2018 年7月兵工学报ACTA ARMAMENTARIIVol.39No.7Jul.2018
|