基于多属性决策灵敏度分析的供弹机压弹机构优化设计

doi:10.3969/j.issn.1000-1093.2014.02.016

兵工学报 ›› 2014, Vol. 35 ›› Issue (2): 241-247.doi: 10.3969/j.issn.1000-1093.2014.02.016

基于多属性决策灵敏度分析的供弹机压弹机构优化设计

杨丽^1,2，孙志礼¹，印明昂¹，王宇宁¹

(1.东北大学机械工程与自动化学院, 辽宁沈阳 110819； 2.沈阳理工大学装备工程学院, 辽宁沈阳 110159)

收稿日期:2013-08-20 修回日期:2013-08-20 上线日期:2014-03-25
作者简介:杨丽(1980—)女副教授博士研究生
基金资助:
国家自然科学基金项目（51205052）

Optimization Design of Cartridge Pressing Structure for Feed Mechanism Based on the Sensitivity Analysis of Multi-attributeDecision Making

YANG Li^1，2， SUN Zhi-li¹， YIN Ming-ang¹， WANG Yu-ning¹

（1.School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110819, Liaoning, China;2.School of Equipment Engineering, Shenyang Ligong University, Shenyang 110159, Liaoning, China)

Received:2013-08-20 Revised:2013-08-20 Online:2014-03-25

摘要/Abstract

摘要： 灵敏度分析是多属性决策的一个重要优化过程，深入分析属性值或属性权重的变化对决策结果的影响很有意义。在线性加权模型的基础上，提出一种灵敏度分析方法，研究了一个属性值或者多个相关属性值同时发生变动以及一个属性权重或者多个相关属性权重同时发生变动下的灵敏度问题，给出一种定量化计算方法，计算出保持原决策排序结果不变的属性及属性权重的灵敏度临界值或稳定区间。通过某小口径火炮供弹机实例验证了该方法的科学性和可行性，计算结果可为供弹机优化设计提供参考。

关键词: 系统工程方法论, 多属性决策, 属性值, 属性权重, 灵敏度分析, 供弹机

Abstract: Sensitivity analysis is an important optimization process of multi-attribute decision making, of which thorough analysis of attribute values or change of attribute weights makes great sense in making decision. On the basis of the linear weighting model, a sensitivity analysis method is proposed, the sensitivity problem which is caused by the change of an attribute value or more related attribute values and the change of an attribute weight or more related attribute weights is researched, and the critical value or the stable interval of sensitivity which keeps the original sort result of decision unchangeable are calculated by a quantitative calculation method. The example about some small-bore artillery feed mechanism shows that the method is scientific and feasible.

Key words: system engineering methodology, multi-attribute decision making, attribute value, attribute weight, sensitivity analysis, feed mechanism

中图分类号:

C934
TP301.6

杨丽，孙志礼，印明昂，王宇宁. 基于多属性决策灵敏度分析的供弹机压弹机构优化设计[J]. 兵工学报, 2014, 35(2): 241-247.

YANG Li， SUN Zhi-li， YIN Ming-ang， WANG Yu-ning. Optimization Design of Cartridge Pressing Structure for Feed Mechanism Based on the Sensitivity Analysis of Multi-attributeDecision Making[J]. Acta Armamentarii, 2014, 35(2): 241-247.

参考文献

［1］ Mendoza G A, Martin H. Multi-criteria decision analysis in natural resource management: a critical review of methods and new modeling paradigms[J].Forest Ecology and Management, 2006,230(1/2/3):1-22.
[2］万树平.供应商选择的多属性群决策方法[J].计算机工程与应用,2009, 45(8):198-199,203.
WAN Shu-ping. Method of multi-attribute group decision making for supplier selection[J].Computer Engineering and Applications,2009,45(8):198-199,203.(in Chinese)
[3］ Sivapirakasam S P, Surianarayanan M J. Multi attribute decision making for green electrical discharge machining[J].Expert System with Applications, 2011,38(7):8370-8374.
[4］双海军,孟卫东.供应商能力有约束的混合型多属性决策方法[J].控制与决策,2011, 26(1):17-21.
SHUANG Hai-jun, MENG Wei-dong. Hybrid multi-attribute decision-making research based on vendor’s capacity constraint[J].Control and Decision,2011, 26(1):17-21.(in Chinese)
[5］马存宝,张彦辉,史浩山,等.基于模糊多属性评判方法的因果强度求解算法[J].仪器仪表学报,2009, 30(2):257-260.
MA Cun-bao, ZHANG Yan-hui,SHI Hao-shan. Causal strength solving algorithm based on fuzzy multi attribute evaluation method [J].Chinese Journal of Scientific Instrument , 2009, 30(2):257-260. (in Chinese)
[6］ Starr M K. A discussion of some normative criteria for decision making under uncertainty [J]. Industrial Management Review, 1966,8(1):71-78.
[7］ Evans J R. Sensitivity analysis in decision theory [J]. Decision Science,1984,15(2):239-247.
[8］ Insua D R, French S. A framework for sensitivity analysis in discrete multi-objective decision-making[J].European Journal of Operation Research, 1991,54(2):176-190.
[9］ Traintaphyllou E, Sabchez A. A sensitivity analysis approach for some deterministic multi criteria decision making methods[J]. Decision Science,1997,28(1):151-187.
[10］ Armacost R L, Hosseini J C. Identification of determinant attributes using the analytic hierarchy process[J]. Journal of the Academy of Making Science,1994,22(4):383-392.
[11］吴超,胡昆.区间数多属性决策中权重灵敏度分析[J].系统工程与电子技术,2004,26(9):1217-1218.
WU Chao, HU Kun. Sensitivity analysis to weight of priorities in multiple attribute decision making with intervals[J].Systems Engineering and Electronics, 2004, 26(9):1217-1218.(in Chinese)
[12］樊治平,李洪燕,姜艳萍.基于OWA算子的群决策方法的灵敏度分析[J].东北大学学报:自然科学版,2004,25(11):1114-1117.
FAN Zhi-ping, LI Hong-yan, JIANG Yan-ping. Sensitivity analysis of group decision making method based on OWA operators[J].Journal of Northeastern University:Natural Science, 2004,25(11):1114-1117.(in Chinese)
[13］ Hwang C L, Yoon K. Multiple attribute decision making: methods and applications [M]. Berlin: Springer-Verlag,1981:20-25.
[14］梁世瑞.自动机创新学引论[M].北京:国防工业出版社,2007:173-182.
LIANG Shi-rui. Innovation introduction of automata[M]. Beijing: National Defense Industry Press, 2007:173-182.
[15］董德威，颜云辉. 带钢质量评价的属性权重灵敏度分析［J］. 组合机床与自动化加工技术，2012，7（7）：11-17.
DONG De-wei, YAN Yun-hui. Sensitivity analysis on attribute weight of strip steel quality evaluation［J］. Modular Machine Tool and Automatic Manufacturing Technique, 2012,7(7):11-17. (in Chinese)
[16］ GB/T 5213—2008 冷轧低碳钢板及钢带[S].北京：中国标准出版社，2009.
GB/T 5213—2008 Cold rolling low carbon steel and strip[S]. Beijing:China Standards Press，2009. (in Chinese)

[1]	李萌, 武海军, 董恒, 任光, 张鹏, 黄风雷. 基于机器学习的混凝土侵彻深度预测模型[J]. 兵工学报, 2023, 44(12): 3771-3782.
[2]	魏伟, 张竞文, 常思江, 王浩圣, 王建中. 基于Sobol和EFAST法的枪弹转动角速度全局灵敏度仿真分析[J]. 兵工学报, 2022, 43(9): 2408-2416.
[3]	刘畅，王江，范世鹏，李伶，林德福. 基于BP神经网络的自适应偏置比例导引[J]. 兵工学报, 2022, 43(11): 2798-2809.
[4]	罗中峰，管小荣，徐诚. 面向弹丸炮口状态的自行火炮结构参数全局灵敏度[J]. 兵工学报, 2021, 42(2): 254-267.
[5]	陈鹏霏，和鹏，于泰龙，刘巧伶. 基于梯度搜索法的非线性结构可靠性分析方法[J]. 兵工学报, 2021, 42(1): 175-184.
[6]	林通，钱林方，付佳维，王明明. 火炮高平机参数辨识与灵敏度[J]. 兵工学报, 2020, 41(9): 1736-1744.
[7]	李阳天，李海滨，韦广梅，翁洁鑫. 基于改进型多项式混沌展开的固体火箭发动机药柱低温点火不确定性量化分析[J]. 兵工学报, 2020, 41(1): 40-48.
[8]	罗中峰，管小荣，徐亚栋，徐诚. 某火炮弹丸在炮口状态的动态灵敏度分析[J]. 兵工学报, 2017, 38(12): 2328-2336.
[9]	刘勤，孙志礼，钱云鹏，刘英. 基于概率功能度量的疲劳可靠寿命分析方法[J]. 兵工学报, 2016, 37(8): 1530-1535.
[10]	杨远志，王红卫，索中英，陈游，范翔宇. 基于粗糙集-逼近理想解排序的辐射源威胁排序方法[J]. 兵工学报, 2016, 37(5): 945-952.
[11]	杨力，马小兵. 维修-更换串联系统贮存可用度建模及费用分析[J]. 兵工学报, 2015, 36(3): 552-558.
[12]	程广利，胡金华，张明敏. 浅海声场对不确定环境参数的灵敏度分析方法[J]. 兵工学报, 2014, 35(4): 567-571.
[13]	张仲敏，李俊山，宋凭₂，严其飞. 一种基于模糊层次分析的多Agent电子对抗装备状态智能评判方法[J]. 兵工学报, 2014, 35(4): 516-522.
[14]	董华超，宋保维，王鹏. 水下航行器壳体结构多目标优化设计研究[J]. 兵工学报, 2014, 35(3): 392-397.
[15]	曾家有，王国卫，钟建林，谢宇鹏. 多平台舰舰导弹饱和攻击几个协同问题与模型[J]. 兵工学报, 2014, 35(2): 256-261.

基于多属性决策灵敏度分析的供弹机压弹机构优化设计

Optimization Design of Cartridge Pressing Structure for Feed Mechanism Based on the Sensitivity Analysis of Multi-attributeDecision Making

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价