欢迎访问《兵工学报》官方网站,今天是

兵工学报 ›› 1993, Vol. 14 ›› Issue (4): 69-74.

• 实验技术与分析 • 上一篇    下一篇

测压圆柱静动态特性计算方法

1:伍鹰;2:朱明武   

  1. 1:北京理工大学;2:南京理工大学
  • 收稿日期:1991-05-01 修回日期:1992-09-01 上线日期:2014-12-25
  • 通讯作者: 伍鹰

Calculation of the Static and Dynamic Characteristics of Prsssure-Measuring Cylinders

Wu Ying, Zhu Mingwu   

  1. 1:Beijing Institute of Technology;2:Nanjing University of Science Technology
  • Received:1991-05-01 Revised:1992-09-01 Online:2014-12-25
  • Contact: Wu Ying

摘要: 给出了测压圆柱体压力与变形的关系式,分析了测压静态特性的影响因素,并设计了一套新的测压柱体系列。对膛压测量中广泛采用的预压铜柱进行了霍普金森压杆实验,获得了这种铜柱的动态本构关系,并依此建立了铜柱测压系统的数学模型,从理论上给出了动态误差的修正曲线。

关键词: 铜柱测压 , 静态特性 , 动态误差 , 误差修正

Abstract: Pressure-deformation relationships of various pressure-measuring cylinders are given in this paper. The factors of influence on the static characteristics of the pressure-measuring cylinders are analyzed,and a new series of pressure-measuring cylinder designed. A series of Split Hopkinson bar experiments with the pre-pressured copper cylinders used for chamber pressure measurement were carried out,and the dynamic constitutive relations for this kind of cylinders obtained. Thereby the mathematical mode of the copper cylinder pressure-measuring system is established. The correction curves of the dynamic errors are theoretically given.

Key words: copper cylinder pressure measurement , static characteristics , calculation method , dynamic error , error correction