飞轮齿圈总成圆跳动的非接触检测方法

兵工学报 ›› 1999, Vol. 20 ›› Issue (1): 68-71.

飞轮齿圈总成圆跳动的非接触检测方法

1:张国玉、安志勇、姜会林、李成志；2：岁建国

1：长春光学精密机械学院，吉林长春，130022；2：湖北江山机械厂

收稿日期:1997-12-01 修回日期:1998-08-01 上线日期:2014-12-25
通讯作者: 张国玉

A Non-Contact Measuring Method for the Run-Out of Flywheel-Gear-Ring Assembly

1:Zhang Guoyu, An Zhiyong ,Jiang Huilin ,Li Chengzhi;2:Sui Jianguo

1:Changchun Institute of Optics ana Fine Mechanics, Changchun, 130022;2:Jiangshan Machinery Factory, Hubei

Received:1997-12-01 Revised:1998-08-01 Online:2014-12-25
Contact: Zhang Guoyu

摘要/Abstract

摘要： 基于激光光电检测技术，提出了一种同时测量汽车飞轮齿圈总成3个不同部位圆跳动误差的非接触检测方法和测量系统，对其测量原理、测量方法和测量系统进行了详细的讨论，并通过实验对测量系统的精度和测量能力指数进行了验证。

关键词: 飞轮齿圈总成 , 圆跳动误差 , 非接触测量 , 激光测头 , 光电检测

Abstract: Based on laser and optoelectronic measuring technology, a non-contact method and measuring system is presented for the simultaneous measurement of the run?out errors at three positions of an automobile flywheel and gear-ring assembly. The measuring principle, method and the system for the run-out errors are discussed in de?tail. The accuracy and measuring capacity index have been verified by experiments.

Key words: flywheel and gear-ring assembly , run-out error , non-contact measure?ment , laser probe , optoelectronic measurement

1:张国玉、安志勇、姜会林、李成志；2：岁建国. 飞轮齿圈总成圆跳动的非接触检测方法[J]. 兵工学报, 1999, 20(1): 68-71.

1:Zhang Guoyu, An Zhiyong ,Jiang Huilin ,Li Chengzhi;2:Sui Jianguo. A Non-Contact Measuring Method for the Run-Out of Flywheel-Gear-Ring Assembly[J]. Acta Armamentarii, 1999, 20(1): 68-71.

[1]	李光亚, 王明泉, 郑景义. 基于超声的铅皮导爆索断细药检测方法研究[J]. 兵工学报, 2013, 34(8): 1037-1040.
[2]	方海燕，刘小勇，乐静，郭俊杰. 球壳表面缺陷的光学复合式非接触测量[J]. 兵工学报, 2011, 32(7): 860-865.
[3]	张国玉，张亚婷，徐熙平，张连存. 一种火炮炮膛锥度的光电检测方法[J]. 兵工学报, 2007, 28(2): 170-174.
[4]	曹国华，苏成志，徐洪吉. 基于位置敏感探测器和激光技术队大型轴系中心线检测方法的研究[J]. 兵工学报, 2006, 27(4): 765-768.
[5]	1:杨志文，邸旭;2:王晋疆. 大曲面检测技术研究[J]. 兵工学报, 2004, 25(1): 95-97.
[6]	1:张国玉，徐熙平，杨琳,李成志；2：何凤梅，何小瓦. 材料高温变形激光扫描测量方法[J]. 兵工学报, 2003, 24(1): 118-120.
[7]	1:王彤宇，潘毓学;2:吴ー辉,贾宏光. 微电子机械系统中微致动器力矩测试技术的研究[J]. 兵工学报, 2002, 23(2): 228-230.
[8]	1:宋甲午，张国玉，安志勇，李成志;2:景红薇，高玉军. 圆度误差的激光扫描非接触测量方法[J]. 兵工学报, 2000, 21(1): 61-63.
[9]	1:宋甲午，张国玉，安志勇、徐洪吉、李成志；2：高玉军. 同轴度误差的激光扫描测量方法[J]. 兵工学报, 1999, 20(3): 243-246.
[10]	1:张国玉、安志勇、张从周、李成志;2:高玉军. 应用半导体激光器的尺寸测量系系统研究[J]. 兵工学报, 1997, 18(2): 125-128.