导热增强型相变材料模拟钢板红外特征的优化设计

兵工学报 ›› 2007, Vol. 28 ›› Issue (6): 692-699.

导热增强型相变材料模拟钢板红外特征的优化设计

叶宏，江利锋

中国科学技术大学热科学和能源工程系，安徽合肥230027

收稿日期:2005-08-09 上线日期:2014-12-25
通讯作者: 叶宏
基金资助:
国家自然科学基金资助项目( 50402009)

Optimization Design of Thermal Conduction Jinhanced Phase Change Material Plates for simulating the Infrared Signature of Steel Plate

YE Hong, JIANG Li-feng

Department of Thermal Science and Energy Engineering, University of Science and Technology of China, Hefei 230027, Anhui, China

Received:2005-08-09 Online:2014-12-25
Contact: YE Hong

摘要/Abstract

摘要： 相变材料( PCM)具有很大的相变潜热，应用于红外示假目标的制作可实现全天候被动式红外示假，但PCM的低导热系数是实现较厚金属板材红外特征模拟的一个主要障碍。针对这个问题，探讨利用铝肋片导热增强型PCM模拟钢板红外特征的方法，建立数理模型，对一系列厚度较大钢板的红外特征模拟进行数值计算，研究肋片的分布密度、厚度以及PCM的厚度等因素对模拟效果的影响，得到用于模拟不同厚度钢板红外特征的PCM板的合理结构参数。

关键词: 热学 , 假目标 , 红外特征 , 相变材料 , 导热增强

Abstract: Phase change material (PCM) with large latent heat can be applied to the preparation of the infrared false targets for realizing all-weather passive infrared decoy, but its low thermal conductivity is a great blockage to simulating infrared signature of thick metal plates. For that reason, a method of simulating the infrared signature of thick steel plates was proposed by the thermal conduction enhanced PCM including the aluminum fins. A physical and mathematic model was set up, and the infrared sig?nature simulation of the thick steel plate was investigated numerically. The effect of the distribution density, thickness of fins and thickness of PCM plate on the simulation efficiency was discussed, and the reasonable construction parameters of PCM plate used to simulate the steel plate with different thickness were obtained.

Key words: thermology , false target , infrared signature , phase change material , enhanced thermal conduction

中图分类号:

E919

叶宏，江利锋. 导热增强型相变材料模拟钢板红外特征的优化设计[J]. 兵工学报, 2007, 28(6): 692-699.

YE Hong, JIANG Li-feng. Optimization Design of Thermal Conduction Jinhanced Phase Change Material Plates for simulating the Infrared Signature of Steel Plate[J]. Acta Armamentarii, 2007, 28(6): 692-699.

参考文献

[1] 叶宏，张栓勤,庄双勇，等.相变材料模拟金属板热特性的理论设计与实验验证[J] ?兵工学报，2006，27(3)：489 - 493.
YE Hong, ZHANG Shuan-qin, ZHUANG Shuang-yong, et al. Theoretical investigation and experimental verification oi the simu-lation of thermal characteristics of metal plate with that of PCM [J]. Acta Armamentarii, 2006，27(3) ：489 一 493. (in Chinese)
[2] TONG Xing-lin, Khan J A, Amin M R. Enhancement of heat transfer by inserting a metal matrix into a phase change material [J]. Numerical Heat Transfer： Part A, 1996, 30 ： 125 - 141.
[3] Ettouney H M，Imad Altatiqi, Mohammad Al-Sahali, Safaa Ah- mad Al-Al1. Heat transfer enhancement by metal screens and met?al spheres in phase change energy storage systems[J]. RenewaoIe Energy, 2004，29:841 — 860.
[4] Osama Mesalhy, et al. Numerical study for enhancing the thermal conductivity of phase change material (PCM) storage using high thermal conductivity porous matrix [ J ] . Energy Conversion and Management, 2005, 46 ： 847 — 867.
[5] JUN Fu-kai, Yuichi Hamada，Yoshio Morozumi, Osamu Miy- atake. Effect of carbon-fiber brushes on conductive heat transfer in phase change materials [ J ]. International Journal of Heat and Mass Transfer, 2002,45:4781-4792.
[6] Frusteri F, Leonardi V, Vasta S，et al. Thermal conductivity measurement of a PCM based storage system containing carbon fibers [J] . Applied Thermal Engineering, 2005,25 ： 1623 - 1633.
[7] Aytunc Erek, Zafer liken, Mehmet Ali Acar. Experimental and numerical investigation of thermal energy storage with a finned tube[J]. International Journal of Energy Research，2005，29 ： 283 -301.
[8] LIU Zhong-liang，SUN Xuan, MA Chong-fang. Experimental investigations on the characteristics of melting processes of stearic acia in an annulus and its thermal conductivity enhancement by fins[j] . Energy Conversion and Management, 2005，46:959 - 969.
[9] Bougoslovski V N. Thermophysics for buildings [ M] . 2rd ed. Moscow： Pablismng House of Institutions of Higher Learning, 1982:356. (in Russian).
[10] Frank P Incropera, David P DE Witt. Fundamentals of heat and mass transfer [M]. 3rd ed. New York ： John Wiley & Sons, 1990:753.
[11] 葛新石，龚堡，陆维德，等.太阳能工程——原理和应用[M]. 北京:学术期刊出版社,1988 ： 100 - 101.
GE Xin-shi，GONG Bao, LU Wei-de, et al. Solar energy engi?neering principles and applications [ M]. Beijing： Academic
Periodical Press, 1988： 100 - 101. (in Chinese)

[1]	赵敏, 曲兆明，王庆国，周星, 陈亚洲. 场致绝缘-金属相变材料的脉冲响应测试方法[J]. 兵工学报, 2022, 43(2): 401-409.
[2]	冯海潮，王羽羽，刘伟，曾永兴，吴克南. 基于三维建模的坦克假目标示假性能仿真技术[J]. 兵工学报, 2021, 42(9): 1998-2003.
[3]	孙春生，张爽，张晓晖，唐勇. 自然地物假目标的有效引偏空域及应用[J]. 兵工学报, 2021, 42(3): 581-587.
[4]	杨辉, 何超, 潘家亮, 贾其, 何猛, 徐鑫. 电热涂层在红外示假中的应用[J]. 兵工学报, 2021, 42(1): 118-123.
[5]	张玉燕，孙莎莎，王振春，曹海要，战再吉. 高速载流电枢表面瞬态温度场仿真与测量[J]. 兵工学报, 2017, 38(9): 1692-1698.
[6]	钟林，饶彬，李永祯. 基于运动学调制的高逼真度有源假目标航迹研究[J]. 兵工学报, 2016, 37(6): 1138-1143.
[7]	张志豪, 孙得川. 飞行器气动加热烧蚀工程计算[J]. 兵工学报, 2015, 36(10): 1949-1954.
[8]	王发成，王子冬，胡道中，佟玉琦，高洪波，陈芬. 车用动力电池组集总参数换热模型[J]. 兵工学报, 2014, 35(2): 145-151.
[9]	谢卫红，贾风辉，李顺才. 机场保障装备防热红外探测隔热毯设计与实验研究[J]. 兵工学报, 2014, 35(1): 55-61.
[10]	徐晓明, 何仁. 高速公路行驶时电动汽车风冷散热性能研究[J]. 兵工学报, 2013, 34(6): 657-663.
[11]	张俊, 刘荣忠, 郭锐, 邱荷, 刘萌萌. 高速旋转飞行弹丸外弹道表面温度场研究[J]. 兵工学报, 2013, 34(4): 425-430.
[12]	王发成，王义春，张承宁，孙晓霞，相龙云. 电传动履带车冷却系统动态传热状态空间模型[J]. 兵工学报, 2012, 33(7): 769-775.
[13]	张勇，马玉中，蒋晓军，于坤，杨立军. 水基伪装泡沫传热性能研究[J]. 兵工学报, 2012, 33(7): 836-839.
[14]	贾其，吕绪良，荣先辉，何超，汤雪峰. 添加相变材料的混凝土路面红外伪装应用研究[J]. 兵工学报, 2011, 32(8): 975-980.
[15]	袁轶慧₁，张俊举₁，陈佐龙₂，常本康. 飞行弹丸表面温度与红外辐射特性仿真研究[J]. 兵工学报, 2010, 31(8): 1090-1094.