小口径引信磁流变脂解除保险机构设计与延时特性

doi:10.3969/j.issn.1000-1093.2019.09.001

兵工学报 ›› 2019, Vol. 40 ›› Issue (9): 1761-1769.doi: 10.3969/j.issn.1000-1093.2019.09.001

小口径引信磁流变脂解除保险机构设计与延时特性

郑佳佳¹，阚君武¹，胡明²，张广²，王炅²

(1.浙江师范大学工学院，浙江金华 321004； 2.南京理工大学机械工程学院，江苏南京 210094）

收稿日期:2018-11-19 修回日期:2018-11-19 上线日期:2019-10-31
通讯作者: 阚君武(1965—)，男，教授，博士生导师 E-mail:kanjw@zjnu.edu.cn
作者简介:郑佳佳(1990—)，男，讲师，博士。 E-mail： jiajia.zheng@zjnu.cn
基金资助:
国家自然科学基金项目（51705467、51877199、51675280）

Design of a Small-caliber Fuze Magnetorheological Grease Safety and Arming Device and Its Delay Time Characteristic

ZHENG Jiajia¹， KAN Junwu¹， HU Ming² ， ZHANG Guang²， WANG Jiong²

(1.College of Engineering, Zhejiang Normal University, Jinhua 321004, Zhejiang, China; 2.School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, Jiangsu, China)

Received:2018-11-19 Revised:2018-11-19 Online:2019-10-31

摘要/Abstract

摘要： 针对现代小口径炮弹引信作用性能要求高与体积小的矛盾，提出一种新型小口径引信延期解除保险机构。该机构利用智能材料磁流变脂在有/无磁场作用下的开关特性，基于黏弹性液体受挤压采用收缩孔泄流的工作原理，实现引信延期解除保险功能。通过流体动力学和磁场分析，推导出反映机构结构尺寸和流体黏度特性等因素的延期时间数学模型。仿真和试验结果表明：局部阻尼系数经修正后可有效降低模型计算误差，最大误差为6.7%；通过匹配不同泄流孔径、弹丸转速和颗粒体积比等参数，可实现机构延期时间可控范围为9~84 ms. 磁流变脂温度工作范围广且颗粒不易发生沉降，解除保险机构简单可靠，在中、小口径引信中具有潜在应用价值。

关键词: 小口径引信, 磁流变脂, 解除保险, 延期时间

Abstract: A novel small-caliber safety and arming (S&A) device is proposed to improve the fuze performance of modern small caliber projectile within a limited space, for which the “locking” and “unlocking” properties of magnetorheological (MR) grease with/without the presence of magnetic field are used. Based on the principle of MR grease flow through an abrupt contraction-expansion under squeezed pressure, the delay time for arming the firing section was obtained. The delay time mathematical model of reflecting the factors, such as structure size and fluid elasto-viscosity characteristics, is further derived by analyzing the fluid dynamic and magnetic fields. Simulated and experimental results show that the modified local damping coefficient favors to reduce the maximum model error to 6.7%. A delay time range of 9-84 ms was successfully achieved by adjusting the physical parameters, including orifice diameter, spinning rate and particle concentration, etc. Owning to a wide temperature operation range and reliable working mechanism, the proposed MR grease S&A device is expected to have extensive application prospects in small and medium caliber fuze systems. Key

Key words: smallcaliberfuze, magnetorheologicalgrease, safetyandarming, delaytime

中图分类号:

TJ430.3⁺3

郑佳佳，阚君武，胡明，张广，王炅. 小口径引信磁流变脂解除保险机构设计与延时特性[J]. 兵工学报, 2019, 40(9): 1761-1769.

ZHENG Jiajia， KAN Junwu， HU Ming ， ZHANG Guang， WANG Jiong. Design of a Small-caliber Fuze Magnetorheological Grease Safety and Arming Device and Its Delay Time Characteristic[J]. Acta Armamentarii, 2019, 40(9): 1761-1769.

参考文献

［1］冯鹏洲. 微机电安全与解除保险装置关键技术研究[D]．南京：南京理工大学, 2008.
FENG P Z. Research on key technology of MEMS safety and arming device[D]. Nanjing: Nanjing University of Science and Technology, 2008. (in Chinese)

[2] REED D S. Ball rotor safety and arming delay device: US 4213395[P]. 1978-07-04.
[3] 张元. 中大口径旋转炮弹引信安全和解除保险装置技术研究[D]．南京：南京理工大学, 2017.
ZHANG Y. Research on safety and arming device technology of medium and large caliber rotating projectiles[D]. Nanjing: Nanjing University of Science and Technology, 2017. (in Chinese)
[4] 张万君, 崔占忠, 黄忠华, 等. 准流体延期解除保险机构及其均匀设计[J].探测与控制学报, 2004, 26(4): 25-29.
ZHANG W J, CUI Z Z, HUANG Z H, et al. Qusi-fluid SAD and its uniform design[J]. Journal of Detection and Control, 2004, 26(4): 25-29. (in Chinese)

[5] 张建宏, 王华. 具有延期解除保险性能的小口径引信隔爆装置[J]. 兵工自动化, 2009, 28(8): 45-46.
ZHANG J H, WANG H. Delayed relief safety explosion isolator with minor-caliber fuze[J]. Ordnance Industry Automation, 2009, 28(8): 45-46. (in Chinese)

[6] CARLSON J D, JOLLY M R. MR fluid, foam and elastomer devices[J]. Mechatronics, 2000, 10(4/5): 555-569.
[7] 胡明, 王炅, 吴小琅. 引信磁流变液解除保险机构贮存寿命评估方法[J]. 兵工学报, 2016, 37(9): 1606-1611.
HU M, WANG J, WU X L. Estimation method for storage life of magnetorheological fluid fuze arming device[J]. Acta Armamentarii, 2016, 37(9): 1606-1611. (in Chinese)

[8] 齐云波, 陆静, 胡明, 等. 小口径引信磁流变液保险机构延时特性研究[J]. 南京理工大学学报, 2016, 40(3): 334-338.
QI Y B, LU J, HU M, et al. Delay characteristics of small caliber fuze magnetorheological fluid safe and arming device[J]. Journal of Nanjing University of Science and Technology, 2016, 40(3): 334-338. (in Chinese)
[9] 胡明, 王炅, 王新杰, 等. 磁流变液延期解除保险机构等效旋转试验平台[J]. 探测与控制学报, 2016, 38(4): 15-19.
HU M, WANG J, WANG X J, et al. Equivalent rotation test-bed for MRF delay arming device[J]. Journal of Detection and Control, 2016, 38(4): 15-19. (in Chinese)

[10] PARK B O, PARK B J, HATO M J, et al. Soft magnetic carbonyl iron microsphere dispersed in grease and its rheological characteristics under magnetic field[J]. Colloid and Polymer Science, 2011, 289(4): 381-386.
[11] WHITELEY J, GORDANINEJAD F, WANG X J. Magnetorheological fluid flow in microchannels[J]. ASME Journal of Applied Mechanics, 2010, 77(4): 041011.
[12] ZHENG J J, LI Y C, LI Z C, et al. Transient multi-physics analysis of a magnetorheological shock absorber with the inverse Jiles-Atherton hysteresis model[J].Smart Materials and Structures, 2015, 24(10): 105024.
[13] SONG H Q. Engineering fluid mechanics[M]. Beijing: Metallurgical Industry Press, and Berlin, Germany: Springer, 2018.
[14] SKELLAND A H P. Non-newtonian flow and heat transfer[M]. New York，NY，US: John Wiley & Sons, 1967.
[15] SOCHI T, BLUNT M J. Pore-scale network modeling of Ellis and Herschel-Bulkley fluids[J]. Journal of Petroleum Science and Engineering, 2008, 60(2): 105-124.
[16] DAUGHERTY R L. Fluidmechanics with engineering applications[M]. New York，NY，US: McGraw-Hill, 1989.
[17] BARRERAS F, LPEZ AM, LOZANO A, et al. Experimental study of the pressure drop in the cathode side of air-forced open-cathode proton exchange membrane fuel cells[J].International Journal of Hydrogen Energy,2011,36(13): 7612-7620.
[18] MONGRUAL A, CLOITRE M. Axisymmetric orifice flow for measuring the elongational viscosity of semi-rigid polymer solutions[J]. Journal of Non-Newtonian Fluid Mechanics, 2003, 110(1): 27-43.

第40卷
第9期2019 年9月兵工学报ACTA
ARMAMENTARIIVol.40No.9Sep.2019

[1]	赵新，纪永祥，刘社锋，陈众，宁小磊. 基于贝叶斯方法的兰利法测试引信解除保险距离数据处理[J]. 兵工学报, 2021, 42(1): 26-32.
[2]	胡明，王炅，吴小琅. 引信磁流变液解除保险机构贮存寿命评估方法[J]. 兵工学报, 2016, 37(9): 1606-1611.
[3]	陈会光，王雨时，闻泉. 用四元数建立引信球转子定点转动的数学模型[J]. 兵工学报, 2009, 30(6): 688-694.
[4]	闻泉，王雨时. 引信解除保险距离兰利法试验模拟研究[J]. 兵工学报, 2008, 29(7): 774-780.
[5]	单永海，范启胜. 榴弹延期时间定型试验方案优化设计与分析[J]. 兵工学报, 2005, 26(1): 56-59.
[6]	张德智、张凯成、刘芝萍. 引信曲折槽保险机构设计的零扭矩原则及其实践[J]. 兵工学报, 1997, 18(4): 375-377.
[7]	李世义、李杰、刘明杰、商继红. 引信全电子安全系统状态控制器的设计原则和方法[J]. 兵工学报, 1994, 15(3): 8-12.
[8]	范宁军、马宝华. 引信安全系统解除保险过程的数学分析[J]. 兵工学报, 1992, 13(3): 80-84.

小口径引信磁流变脂解除保险机构设计与延时特性

Design of a Small-caliber Fuze Magnetorheological Grease Safety and Arming Device and Its Delay Time Characteristic

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 8

编辑推荐

Metrics

本文评价