平头弹低速冲击下薄钢板的穿甲破坏机理研究

doi:10.3969/j.issn.1000-1093.2018.05.007

摘要/Abstract

摘要： 为研究平头弹低速冲击下薄钢板的穿甲破坏机理，开展了一系列弹道试验。对比分析了不同初始速度下的弹体变形以及靶板破坏模式。采用非线性有限元分析ANSYS/LS-DYNA软件，对弹靶作用过程进行了数值模拟。根据试验结果确定了碟形区最终变形挠度的拟合函数，在此基础上对弹体和靶板的塑性变形能进行了理论分析，同时利用能量守恒原理建立了平头弹低速侵彻薄钢板的剩余速度计算模型。结果表明：平头弹低速侵彻下会发生一定程度的墩粗变形；平头弹低速侵彻下靶材主要为拉伸与剪切混合失效，靶板相应的失效模式为带有碟形变形的拉伸与剪切混合失效模式；弹体剩余速度的理论模型与试验结果吻合较好，有效地验证了该理论模型的适用性。

关键词: 平头弹, 穿甲, 低速冲击, 靶板破坏模式, 剩余速度模型

Abstract: The ballistic tests were carried out to explore the failure modes of target impacted by the blunt projectile. The deformation of of projectiles and the damage modes of targets at different initial velocities were analyzed. The interaction between projectile and target is simulated using ANSYS/LS-DYNA for analyses of penetration mechanism. The fitting curve of final target deformation in the dishing area was acquired according to the test results. The plastic deformation energies of projectile and target are analyzed, and a simplified analytical model for residual velocity is proposed based on principle of conservation of energy. It is shown that mushrooming deformation is observed in the projectile. The target material fails due to sheering and stretching, and accordingly the failure modes of targets are global dishing deformation with local sheering and tensile failures. The residual velocity drawn from the formula proposed in this paper is in good agreement with the test data, which testifies the applicability of the proposed model. Key

Key words: bluntprojectile, perforation, low-velocityimpact, targetplatefailuremode, residualvelocitymodel

中图分类号:

O385

徐伟，侯海量，朱锡，陈长海，李茂. 平头弹低速冲击下薄钢板的穿甲破坏机理研究[J]. 兵工学报, 2018, 39(5): 883-892.

XU Wei, HOU Hai-liang, ZHU Xi, CHEN Chang-hai, LI Mao. Investigation on the Damage Mechanism of Blunt Projectile against Thin Plate[J]. Acta Armamentarii, 2018, 39(5): 883-892.

参考文献

［1］ Borvik T, Langseth M, Hopperstad O S, et al. Perforation of 12 mm thick steel plates by 20 mm diameter projectiles with flat, hemispherical and conical noses: part I: experimental study［J］. International Journal of Impact Engineering, 2002, 27(1): 19-35.
［2］ Borvik T, Hopperstad O S, Berstad T, et al. Perforation of 12 mm thick steel plates by 20 mm diameter projectiles with flat, hemispherical and conical noses: part II: numerical simulations［J］. International Journal of Impact Engineering, 2002, 27(1): 37-64.
［3］ Gupta N K, Iqbal M A, Sekhon G S. Effect of projectile nose shape, impact velocity and target thickness on deformation behavior of aluminum plates［J］. International Journal of Solids and Structures, 2007, 44(10): 3411-3439.
［4］余庆波，郭焕果，张田育子，等. 不同头形刚性弹丸侵彻钢靶力学行为［J］. 北京理工大学学报, 2017, 37(4): 331-336.
YU Qing-bo, GUO Huan-guo, ZHANG Tian-yuzi, et al. Dynamic behavior of non-deformation projectile with different nose shape penetrating steel plate ［J］. Transactions of Beijing Institute of Technology, 2017, 37(4): 331-336. (in Chinese)
［5］ Woodward R L. A structural model for thin plate perforation by normal impact of blunt projectiles［J］. International Journal of Impact Engineering, 1987, 6(2): 129-140.
［6］ Wen H M, Reddy T Y, Reid S R. Deformation and failure of clamped beams under low speed impact loading［J］. International Journal of Impact Engineering, 1995, 16(3): 435-454.
［7］ Wen H M. Deformation and perforation of clamped work-hardening plates struck transversely by blunt missiles［J］. Nuclear Engineering and Design, 1996, 160(1/2): 51-58.
［8］ Wen H M, Jones N. Low velocity perforation of punch-impact-loaded metal plates［J］. Journal of Pressure Vessel Technology, 1996, 118(2): 181-187.
［9］ Chen X W, Li Q M. Shear plugging and perforation of ductile circular plates struck by a blunt projectile［J］. International Journal of Impact Engineering, 2003, 28(5): 513-536.

［10］ Chen X W, Zhou X Q, Li X L. On perforation of ductile metallic plates by blunt rigid projectile［J］. European Journal of Mechanics A/Solids, 2009, 28(2): 273-283.
［11］陈小伟，梁冠军，姚勇，等. 平头弹穿透金属靶板的模式分析［J］. 力学学报, 2009, 41(1): 84-89.
CHEN Xiao-wei, LIANG Guan-jun, YAO Yong, et al. Perforation modes of metal plates struck by a blunt rigid projectile［J］. Chinese Journal of Theoretical and Applied Mechanics, 2009, 41(1): 84-89.(in Chinese)
［12］蒋志刚, 曾首义，周建平. 金属薄靶板冲塞破坏最小穿透能量分析刚性平头弹［J］. 工程力学, 2004, 21(5): 203-208.
JIANG Zhi-gang, ZENG Shou-yi, ZHOU Jian-ping. Analyses of critical impact energy for plugging failure of thin metallic plates［J］. Engineering Mechanics, 2004, 21(5): 203-208. (in Chinese)
［13］潘建华, 文鹤鸣. 平头弹丸正撞击下延性金属靶板的破坏模式［J］. 高压物理学报, 2007, 21(2): 157-164.
PAN Jian-hua, WEN He-ming. Failure modes of ductile metal plates under normal impact by flat-ended projectiles［J］. Chinese Journal of High Pressure Physics, 2007, 21(2): 157-164. (in Chinese)
［14］邓云飞, 张伟, 孟凡柱，等. Q235钢单层板对平头刚性弹抗穿甲特性研究［J］. 振动与冲击, 2015, 34(2): 74-78.
DENG Yun-fei, ZHANG Wei, MENG Fan-zhu, et al. Ballistic resistance of Q235 steel monolithic plates impacted by rigid blunt-nosed projectiles［J］. Journal of Vibration and Shock, 2015, 34(2): 74-78. (in Chinese)
［15］侯海量, 朱锡, 李伟, 等. 低速大质量球头弹冲击下薄板穿甲破坏机理数值分析［J］. 振动与冲击, 2008,27(1): 40-45.
HOU Hai-liang, ZHU Xi, LI Wei, et al. Numerical analysis of perforation mechanism for a thin plate subjected to impact by hemispherical-nosed projectiles with low velocity［J］. Journal of Vibration and Shock, 2008,27(1): 40-45. (in Chinese)
［16］陈长海，朱锡，侯海量，等. 球头弹丸速冲击下薄板大变形的理论计算［J］. 华中科技大学学报：自然科学版, 2012, 40(12): 88-93.
CHEN Chang-hai, ZHU Xi, HOU Hai-liang, et al. Theoretical calculation of large deformation for thin plate impacted by hemispherical-nosed projectile with low velocity［J］. Journal of Huazhong University of Science & Technology:Natural Science, 2012, 40(12): 88-93. (in Chinese)
［17］ Iqbal M A, Tiwari G, Gupta P K,et al. Ballistic performance and energy absorption characteristics of thin aluminium plates［J］. International Journal of Impact Engineering, 2015, 77(3): 1-15.
［18］司马玉州，肖新科，王要沛,等. 7A04-T6高强铝合金板对平头杆弹抗侵彻行为的试验与数值模拟研究［J］. 振动与冲击, 2017,36(11): 1-7.
SIMA Yu-zhou, XIAO Xin-ke, WANG Yao-pei, et al. Test and numerical simulation for anti-penetrating behavior of a high strength 7A04-T6 aluminium alloy plate against a blunt projectile's impact［J］. Journal of Vibration and Shock, 2017,36(11): 1-7. (in Chinese)
［19］刘兵, 陈小伟. 平头弹穿透间隙式双层靶的穿甲模式［J］. 爆炸与冲击, 2016, 36(1): 24-30.
LIU Bing, CHEN Xiao-wei. Perforation modes of double-layered plates with air space struck by a blunt rigid projectile［J］. Explosion and Shock Waves, 2016, 36(1): 24-30. (in Chinese)
［20］张晓晴, 杨桂通, 黄小清. 柱形平头弹体墩粗变形的理论分析［J］. 华南理工大学学报：自然科学版, 2005, 33(1): 32-36.
ZHANG Xiao-qing, YANG Gui-tong, HUANG Xiao-qing. Theoretical analysis of the mushrooming deformation of flattened cylindrical projectile［J］. Journal of South China University of Technology:Natural Science Edition 2005, 33(1): 32-36. (in Chinese)
［21］赵文宣.终点弹道学［M］.北京:兵器工业出版社，1989.
ZHAO Wen-xuan. Terminal ballistics［M］.Beijing: Publishing House of Ordnance Industry,1989.(in Chinese)
［22］侯海量. 大型舰船水上舷侧结构抗毁伤机理研究［D］. 武汉：海军工程大学，2006.
HOU Hai-liang. Study on mechanism of damage-resistant of large scale surface warship top side structure［D］.Wuhan: Naval University of Engineering, 2006. (in Chinese)
［23］王礼立. 应力波基础［M］. 北京：国防工业出版社，2005.
WANG Li-li. Foundation of stress waves［M］.Beijing: National Defense Industry Press, 2005. (in Chinese)
［24］朱锡，张振华，梅志远，等. 舰船结构毁伤力学［M］. 北京：国防工业出版社，2013.
ZHU Xi, ZHANG Zhen-hua, MEI Zhi-yuan, et al. Damage mechanics of warship structure subjected to explosion［M］. Beijing: National Defense Industry Press, 2013. (in Chinese)

第39卷
第5期2018 年5月兵工学报ACTA
ARMAMENTARIIVol.39No.5May2018

[1]	李永鹏，徐豫新，张健，花培鑫，赵晓旭. SiC陶瓷/UHMWPE纤维复合结构抗12.7mm穿甲燃烧弹试验与仿真[J]. 兵工学报, 2022, 43(6): 1355-1364.
[2]	闫文敏，王光华，金永喜，王舒，许啸，田野. 枪弹穿甲后效破片对典型防弹衣侵彻毁伤特性试验研究[J]. 兵工学报, 2019, 40(11): 2378-2384.
[3]	张晋红，李如江，刘天生. 环形及线形聚能装药侵彻体对长杆式穿甲弹穿甲过程干扰的试验和数值模拟[J]. 兵工学报, 2018, 39(7): 1372-1378.
[4]	王韫泽, 王树山, 魏平亮, 舒彬, 梁振刚. 穿甲弹异物阻滞膛炸机理数值仿真分析[J]. 兵工学报, 2018, 39(5): 859-866.
[5]	李典，侯海量，朱锡，陈长海，李茂. 破片群侵彻纤维增强层合板破坏机理及穿甲能力等效方法[J]. 兵工学报, 2018, 39(4): 707-716.
[6]	黄振贵，汤祁忠，陈志华，赵强. 非零攻角和侧滑角条件下弹托不同步飞离的数值模拟[J]. 兵工学报, 2016, 37(6): 1006-1015.
[7]	罗荣梅，黄德武，杨明川，黄海，李馥颖. 杆式穿甲弹侵彻靶板时弹坑表面熔化快凝层研究[J]. 兵工学报, 2015, 36(7): 1167-1175.
[8]	黄振贵, 陈志华, 郭玉洁. 尾翼稳定脱壳穿甲弹脱壳动力学过程的三维数值模拟[J]. 兵工学报, 2014, 35(1): 9-17.
[9]	蒋志刚，曾首义，申志强. 轻型陶瓷复合装甲结构研究进展[J]. 兵工学报, 2010, 31(5): 603-610.
[10]	王帅, 刘伟东, 冯荣欣, 刘凯欣. 钢管列缩比模型抗穿甲能力研究[J]. 兵工学报, 2010, 31(4): 477-481.
[11]	王明洋，主德荣，宋春明. 铜筋混凝土梁在低速冲击下的计算方法[J]. 兵工学报, 2006, 27(3): 399-405.
[12]	韩永要，赵国志，李向东，杨玉林，方清. 长管体垂直侵彻半无限靶筒化模型[J]. 兵工学报, 2005, 26(2): 159-162.
[13]	王明洋，陈士林，潘越峰. 平头弹在岩石（混凝土）介质中的侵彻计算方法[J]. 兵工学报, 2005, 26(1): 46-52.
[14]	王明洋，宋春明，王德荣,潘越峰. 钢筋混凝土板在低速冲击下的计算方法[J]. 兵工学报, 2004, 25(6): 672-678.
[15]	朱锡，梅志运，徐顺棋,冯文山. 高速破片侵彻舰用复合装甲模型实验研究[J]. 兵工学报, 2003, 24(4): 530-533.