激光化学微推进推力性能的实验研究

doi:10.3969/j.issn.1000-1093.2014.06.023

兵工学报 ›› 2014, Vol. 35 ›› Issue (6): 908-914.doi: 10.3969/j.issn.1000-1093.2014.06.023

激光化学微推进推力性能的实验研究

李龙, 胡晓军, 唐志平

(中国科学技术大学近代力学系，安徽合肥 230027)

收稿日期:2013-08-15 修回日期:2013-08-15 上线日期:2014-07-24
通讯作者: 李龙 E-mail:lilong1@ustc.edu.cn
作者简介:李龙(1985—)男博士后
基金资助:
国家自然科学青年基金项目（11302221）

Experimental Investigation on Propulsion Performance of Laser Chemical Micro-propulsion

LI Long， HU Xiao-jun， TANG Zhi-ping

(Department of Modern Mechanics,University of Science and Technology of China, Hefei 230027, Anhui, China)

Received:2013-08-15 Revised:2013-08-15 Online:2014-07-24
Contact: LI Long E-mail:lilong1@ustc.edu.cn

摘要/Abstract

摘要： 影响激光化学微推进推力性能的主要因素为激光和推进工质的参数。对不同厚度的自研制双基药复合工质进行了推力性能的实验研究。实验中，激光焦斑为50 μm，激光功率密度为4.74×10⁴ W/cm². 实验发现随着工质厚度的增加，工质的冲量耦合系数有渐增的趋势，而比冲有渐减的趋势。将激光功率提高近1倍，选用功率为1.80 W的半导体激光器，25 μm厚的双基药复合工质的冲量耦合系数和比冲分别达到了130.8 dyne/W和493.0 s，此时，名义上的激光能量利用率高达316.4%，是聚氯乙烯（PVC）工质的6.46倍，化学能的释放更加充分。

关键词: 航空航天推进系统, 激光化学微推进, 烧蚀模式, 冲量耦合系数, 比冲

Abstract: The parameters of laser and propellants are the main factors affecting the propulsion performance of laser chemical micro-propulsion. The thickness of propellant is an important experimental parameter under T-mode. Hence, the propulsion performances of complex double-base propellants with different thickness are studied experimentally. The experimental results show that the momentum coupling coefficient increases with the incease in thickness of propellant while the specific impulse reduces on the contrary. The effect of laser power density on the release of chemical energy is studied. When a semiconductor laser with the power of 1.80 W and the double-base propellant are used, the momentum coupling coefficient and specific impulse are 130.8 dyne/W and 493.0 s, respectively, while the laser energy coefficient is 316.4%, which is 6.46 times better than that of PVC propellant without the release of chemical energy.

Key words: propulsion system of aviation and aerospace, laser chemical micro-propulsion, ablation mode, momentum coupling coefficient, specific impulse

中图分类号:

O389

李龙, 胡晓军, 唐志平. 激光化学微推进推力性能的实验研究[J]. 兵工学报, 2014, 35(6): 908-914.

LI Long， HU Xiao-jun， TANG Zhi-ping. Experimental Investigation on Propulsion Performance of Laser Chemical Micro-propulsion[J]. Acta Armamentarii, 2014, 35(6): 908-914.

参考文献

［1］林来兴. 现代小卫星的微推进系统[J]. 航天器工程，2010，19(6): 13-20.
LIN Lai-xing. Micro-propulsion system for modern small satellites[J]. Spacecraft Engineering, 2010,19(6):13-20. (in Chinese)
[2] 林来兴．小卫星技术发展和应用前景[J]．航天器工程，2006， 15(3):14-18.
LIN Lai-xing. Development and application prospects of small satellite technology[J]. Spacecraft Engineering, 2006, 15(3): 14-18. (in Chinese)
[3] Helvajian H, Janson S W．Small satellites past, present and future[M]. US:The Aerospace Press, 2009.
[4] Mueller J, Ziemer J, Hofer R, et al. A survey of micro thrust propulsion options for micro-spacecraft and formation flying missions[C/OL]∥5th Annual CubeSat Developers Workshop. San Luis Obispo: California Polytechnic State University,2008. ［2011-12-15］.Http:∥mstl.atl.calpoly.edu/~bklofas/Presentations /DevelopersWorkshop2008/session2/4-MicroThrusters-Juergen_Mueller.pdf.
[5] Micci M M, Ketsdever A D. Micropropulsion for small spacecraft[M]. US: AIAA, 2000.
[6] Ross C．Design，fabrication and modeling of solid propellant microcket-app to micro propulsion[J]．Sensor and Actuator A, 2003，99:125-133.
[7] Bayt R L, Breuer K S. Analysis and testing of a silicon intrinsic-point heater in a micropropulsion application[J]. Sensors and Actuators A, 2001, 91:249-255.
[8] Zhang K L. Development of a solid propellant microthruster with chamber and nozzle etched no a wafersurface[J]．Journal of Micromechanics and Microengineering, 2004,14: 785-792.
[9] 禹天福．空间化学推进技术的发展[J]．火箭技术，2005，31(6):23-29．
YU Tian-fu. Development of space chemical propulsion technology[J]. Journal of Rocket Propulsion, 2005, 31(6):23-29. (in Chinese)
[10] Lippert T, Urech L, Phipps C R, et al. Polymer ablation: from fundamentals of polymerdesign to laser plasma thruster[J]. Applied Surface Science, 2007, 253 (15):6409-6415.
[11] Phipps C R, Luke J R, Helgeson W, et al. Performance test results for the laser-powered microthruster[J].AIP Conference Proceedings, 2006, 830: 224-234.
[12] 蔡建. 激光微推进的原理和应用研究[D]. 合肥：中国科学技术大学, 2007:61-76.
CAI Jian. Mechanism and experiment investigation of laser micro-propulsion[D]. Hefei: University of science and technology of China, 2007:61-76. (in Chinese)
[13] Pirri A N, Monsler M J, Nebolsin P E. Propulsion by absorption of laser radiation[J]. AIAA Journal,1974, 12(9):1254-1261.

[1]	魏万里，郑权，鲁江涛，翁春生，武郁文. 中心锥对液态燃料旋转爆轰发动机工作过程与性能的影响[J]. 兵工学报, 2021, 42(6): 1185-1194.
[2]	汪泉, 陆军伟, 李志敏, 林朝键, 李雪交, 程扬帆, 李瑞. 负压条件下柱形爆炸罐内爆炸波传播规律[J]. 兵工学报, 2021, 42(6): 1250-1256.
[3]	郑权，李宝星，翁春生，白桥栋. 双波对撞模态下的液态燃料旋转爆轰发动机推力测试研究[J]. 兵工学报, 2017, 38(4): 679-689.
[4]	王伟臣，李世鹏，张峤，王宁飞，王长健，许毅. 工作条件对固体发动机羽流温度场的影响[J]. 兵工学报, 2011, 32(12): 1493-1498.

激光化学微推进推力性能的实验研究

Experimental Investigation on Propulsion Performance of Laser Chemical Micro-propulsion

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 4

编辑推荐

Metrics

本文评价