欢迎访问《兵工学报》官方网站,今天是 分享到:

兵工学报 ›› 2023, Vol. 44 ›› Issue (8): 2245-2262.doi: 10.12382/bgxb.2022.0282

• • 上一篇    下一篇

组合式飞行器多体动力学建模与飞行力学特性

杜万闪1, 周洲1,*(), 拜昱1, 张志林2, 王科雷1   

  1. 1.西北工业大学 航空学院, 陕西 西安 710072
    2.中国兵器工业第203研究所, 陕西 西安 710061
  • 收稿日期:2022-04-20 上线日期:2023-08-30
  • 通讯作者:
  • 基金资助:
    国防基础加强计划技术领域基金项目(2021-JCJQ-JJ-0790); 陕西省重点研发计划项目(2021ZDLGY09-08)

Study on Multibody Dynamics Modeling and Flight Dynamic Characteristics of Combined Aircraft

DU Wanshan1, ZHOU Zhou1,*(), BAI Yu1, ZHANG Zhilin2, WANG Keilei1   

  1. 1. School of Aeronautics, Northwestern Polytechnical University, Xi’an 710072, Shaanxi, China
    2. 203 Research Institute of China Ordnance Industries, Xi’an 710061, Shaanxi, China
  • Received:2022-04-20 Online:2023-08-30

摘要:

为精确、完整地描述组合式多体飞行器空间运动位形,基于拟坐标形式的Lagrange方程提出反映相对滚转运动的8自由度组合式三体飞行器动力学建模方法。采用计算流体力学方法建立考虑气动耦合效应的组合式飞行器系统气动力数据库。通过算例将所建模型与ADAMS软件的仿真结果进行对比,验证所建模型的准确性。在此基础上,进行配平方案及飞行力学特性研究,分析比较飞行器在不同配平状态的动力学特性,并基于串级PID控制方法进行增稳控制研究。研究结果表明:所建模型有效反映了组合式飞行器的相对运动;在给定配平方案及飞行工况后,该构型飞行器存在“对称下反”和“对称上反”两个配平状态,在两个状态下的相对滚转运动静稳定性显著不同;除了传统飞行力学模态,该构型飞行器还存在由相对滚转运动主导的4个新生运动模态,按运动特性可分为复合对称运动和复合反对称运动两类;针对在无控状态下该构型飞行器无法长期保持稳定飞行的问题,所提增稳控制方案合理有效,可以快速镇定发散的飞行力学系统;所提建模方法和增稳控制方案可为多体飞行器设计分析提供指导和参考。

关键词: 组合式飞行器, 多体动力学, 飞行力学特性, 拟坐标, 增稳控制

Abstract:

To precisely and completely describe the location and shape of the combined multibody aircraft, a dynamic modeling method of the 8 DOF combined three-body aircraft reflecting relative rolling motion is proposed using Lagrange’s equations with quasi-coordinates. The aerodynamic database of the combined multibody aircraft system considering the aerodynamic coupling effect is established by the CFD method. The accuracy of the model is verified by comparing the model with ADAMS software through a numerical example. Based on this, the trim scheme and flight dynamic characteristics of the aircraft in different trim states are studied. The stability augmentation control is studied based on the cascade PID control method. The results show that the established model effectively reflects the relative motion of the combined aircraft. With the given trim scheme and flight condition, the aircraft of this configuration has two trim states of "symmetrical lower inverse" and "symmetrical upper inverse", and the static stability of relative rolling motion in the two states is quite different. In addition to the traditional flight mechanics mode, there are 4 new motion modes dominated by relative rolling motion, which can be divided into composite symmetric motion and composite antisymmetric motion according to the motion characteristics. To address the problem that the aircraft with this configuration cannot keep stable flight for a long time without control, the stability augmentation control scheme is reasonable and effective, which can quickly stabilize the divergent flight mechanics system. The proposed modeling method and stabilization control scheme can provide guidance and reference for the design and analysis of multibody aircrafts.

Key words: combined aircraft, multibody dynamics, flight dynamic characteristics, quasi-coordinate, stability augmentation control

中图分类号: