联合刚性壁冲击实验与仿真的标准化非致命测试弹丸验证

吴佳锴; 汪送; 宋佳明; 陈斌

doi:10.12382/bgxb.2026.0125

您当前的位置：

首页 >

文章列表页 >

联合刚性壁冲击实验与仿真的标准化非致命测试弹丸验证

更新时间：2026-08-22

- 联合刚性壁冲击实验与仿真的标准化非致命测试弹丸验证
- Validation Study on Standardized Non-Lethal Test Projectiles Using Integrated Rigid Wall Impact Experiments and Simulations
- 兵工学报 2026年
- 作者机构：
  
  1.武警工程大学装备管理与保障学院, 陕西西安 710086
  2.武警工程大学研究生大队, 陕西西安 710086
- 作者简介：
  
  邮箱：onesoon@163.com
- 基金信息：
  
  中国博士后科学基金面上资助项目(2019M664027);陕西省自然科学基础研究计划一般项目(面上)(2022JM-049)
- DOI：10.12382/bgxb.2026.0125
  中图分类号： TJ401
- 收稿：2026-02-04，
  
  修回：2026-03-29，
  
  录用：2026-05-13，
- 稿件说明：
移动端阅览
吴佳锴, 汪送, 宋佳明, 等. 联合刚性壁冲击实验与仿真的标准化非致命测试弹丸验证[J/OL]. 兵工学报, 2026.

WU Jiakai, WANG Song, SONG Jiaming, et al. Validation Study on Standardized Non-Lethal Test Projectiles Using Integrated Rigid Wall Impact Experiments and Simulations[J/OL]. Acta Armamentarii, 2026.
吴佳锴, 汪送, 宋佳明, 等. 联合刚性壁冲击实验与仿真的标准化非致命测试弹丸验证[J/OL]. 兵工学报, 2026. DOI： 10.12382/bgxb.2026.0125.

WU Jiakai, WANG Song, SONG Jiaming, et al. Validation Study on Standardized Non-Lethal Test Projectiles Using Integrated Rigid Wall Impact Experiments and Simulations[J/OL]. Acta Armamentarii, 2026. DOI： 10.12382/bgxb.2026.0125.

摘要

针对钝性弹道冲击测试靶标验证缺乏标准化测试弹丸的问题，以北约标准化弹丸SIR-X为参照，提出一种联合物理实验与数值模拟的弹丸构建与验证方法。构建标准化测试弹丸几何模型，通过组合聚氨酯泡沫弹头与聚偏二氟乙烯‌(Polyvinylidene Fluoride‌，PVDF)材质弹体制备弹头硬度各异（邵氏硬度30~70 HOO）的5种物理测试弹丸，并观测其微观结构特性，依据北大西洋公约组织标准AEP-99响应走廊进行刚性壁冲击实验筛选，确定弹头硬度为60 HOO的弹丸为符合标准的基准物理弹丸。基于相同几何模型构建弹丸有限元模型（数字测试弹丸），并进行刚性壁冲击仿真，对标AEP-99标准响应走廊，完成数字测试弹丸验证；进而开展物理测试弹丸和数字测试弹丸冲击响应一致性验证，调整材料参数，在两种碰击速度下，冲击实验和仿真所产生的峰值位移、峰值力及其到达时刻误差值均不超过5%，平均绝对差值对比分析进一步表明，数字测试弹丸能够较好复现物理测试弹丸的冲击载荷及变形响应，二者具有较高的冲击响应一致性。研究结果表明，所构建的标准化非致命测试弹丸能够同时满足AEP-99标准响应要求及物理与数字冲击响应一致性要求，其中物理测试弹丸具有制备工艺简便、成本低和研制周期短等特点，数字测试弹丸则可有效表征其实验冲击行为。该方法可为非致命动能弹测试靶标的标准化验证提供支撑，推动相关靶标制备与验证规范、损伤评估标准的建立，并可为新型非致命动能弹的设计与性能评价提供参考。

Abstract

Addressing the lack of standardized test projectiles for validating targets in blunt ballistic impact testing

this paper proposes a methodology for projectile construction and validation that integrates physical experiments and numerical simulations

using the NATO standardized projectile SIR-X as a reference. In the physical experiments

following the construction of a geometric model for the standardized test projectile

five physical test projectiles with varying projectile head hardness (Shore hardness 30-70 HOO) were fabricated. Through rigid wall impact tests conducted in accordance with the AEP-99 standard response corridor

the projectile with a head hardness of 60 HOO was selected as the benchmark physical projectile conforming to the standard. In the numerical simulations

a finite element model (digital test projectile) was developed based on the identical geometric model and subjected to rigid wall impact simulations. The digital test projectile was validated against the AEP-99 standard response corridor. Subsequently

consistency verification of the impact responses between the physical and digital test projectiles was performed. After adjusting material parameters

the errors in peak displacement

peak force

and their respective timing between impact experiments and simulations under two impact velocities were all less than 5%. Further analysis of the mean absolute differences demonstrates that the digital test projectile can accurately reproduce the impact load and deformation responses of the physical test projectile

showing good consistency in impact response. The results indicate that the developed standardized non-lethal test projectile satisfies both the AEP-99 response requirements and the consistency requirements between physical and digital impact responses. The physical test projectile features a simple fabrication process

low cost

and short development cycle

while the digital test projectile effectively represents its experimental impact behavior. This method provides technical support for the standardized validation of test targets for non-lethal kinetic-energy projectiles

facilitates the development of relevant target fabrication and validation procedures and injury assessment standards

and offers a reference for the design and performance evaluation of new non-lethal kinetic-energy projectiles.

关键词

Keywords

references

汪送 . 耦合多维致伤判据的防暴动能弹安全设计规范研究 [J ] . 兵器装备工程学报 , 2021 , 42 ( 11 ): 69 - 76 .

Wang S . Research on safety design specifications for riot kinetic energy projectiles coupled with multi-dimensional injury criteria [J ] . Journal of Ordnance Equipment Engineering , 2021 , 42 ( 11 ): 69 - 76 . (in Chinese)

顾天航 , 李永利 , 宛泉伯 . 智能非致命电磁恒量动能打击武器系统设计与关键技术综述 [J ] . 兵工学报 , 2025 , 46 ( 增刊1 ): 15 - 32 .

Gu T H , Li Y l , Wan Q B . Design and key technologies of intelligent non-lethal electromagnetic constant-kinetic-energy strike weapon system: a review [J ] . Acta Armamentarii , 2025 , 46 ( S1 ): 15 - 32 . (in Chinese)

罗贤 , 屈志学 , 郭程旺 , 等 . 一种新型胸部物理模型的设计及冲击响应分析 [J/OL ] . 爆炸与冲击 , 2025 ( 2025-11-27 )[ 2025-12-17 ] . https://link.cnki.net/urlid/51.1148.O3.20241216.1621.002 https://link.cnki.net/urlid/51.1148.O3.20241216.1621.002 .

Luo X , Qu Z X , Guo C W , et al . Design and impact response analysis of a novel thoracic physical model [J/OL ] . Explosion and Shock Waves , 2025 ( 2025-11-27 )[ 2025-12-17 ] . https://link.cnki.net/urlid/51.1148.O3.20241216.1621.002 https://link.cnki.net/urlid/51.1148.O3.20241216.1621.002 . (in Chinese)

Nicolas D , Alain B , EugÉNIE C , et al . Lethal head ballistic trauma with a «nonlethal» projectile: a case report and review of the literature [J ] . Legal Medicine , 2023 , 64 : 102268 .

Plaza-Patiño O A , Benavides-Erazo M J , Fernández-Cocuyame H A , et al . Determination of the perpetrator-victim position in a case of severe traumatic brain injury due to a less-lethal weapon projectile, based on brain injuries [J ] . European Journal of Medical and Health Sciences , 2024 , 6 ( 5 ): 64 - 68 .

Khoshmohabat H , Behzadnia M J , Rasoolian M . Evaluation of Trauma Injury Patterns and Treatments of Urban Riots in Tehran [J ] . Trauma Monthly , 2026 , 30 ( 6 ): 1657 - 1663 .

Wu J K , Wang S , Zhang Z H , et al . A review of blunt impact injuries to the human head caused by non-lethal kinetic projectiles [J ] . Journal of Forensic and Legal Medicine , 2026 , 118 : 103074 .

Haar R J , Iacopino V , Ranadive N , et al . Death, injury and disability from kinetic impact projectiles in crowd-control settings: a systematic review [J ] . BMJ Open , 2017 , 7 : e018154 .

陈斌 , 汪送 , 刘星雨 , 等 . 面向钝性弹道冲击损伤评估的头部有限元模型 [J ] . 兵工学报 , 2025 , 46 ( 8 ): 241022 .

Chen B , Wang S , Liu X Y , et al . A head finite element model for blunt ballistic impact injury assessment [J ] . Acta Armamentarii , 2025 , 46 ( 8 ): 241022 . (in Chinese)

AEP-99:Thorax injury risk assessment of nonlethal projectiles [S ] ..

Liu K , Shi J , Feng Y , et al . Investigating injuries caused by the blunt impact of non-lethal frangible projectiles using numerical simulations [J ] . Forensic Science International , 2025 : 112738 .

Oukara A , Nsiampa N , Robbe C , et al . Injury risk assessment of non-lethal projectile head impacts [J ] . The Open Biomedical Engineering Journal , 2014 , 8 : 75 .

Pavier J , Langlet A , Eches N , et al . Experimental study of the coupling parameters influencing the terminal effects of thoracic blunt ballistic impacts [J ] . Forensic Science International , 2015 , 252 : 39 - 51 .

Ouyang D H , Qin C W , Qin X W , et al . Numerical study on the blocking effect of skin on flash-ball impact and damage assessment [J ] . Defence Technology , 2024 , 33 : 532 - 545 .

Kebbab Y , Oukara A , Louar M A , et al . On the design of kinetic energy non-lethal projectile based on the dynamic characterization of polymer foams [J ] . Proceedings of the Institution of Mechanical Engineers , Part L: Journal of Materials: Design and Applications, 2025 , 240 ( 3 ): 356 - 369 .

张昭晖 , 汪送 , 杨晓银 , 等 . 38 mm复合型非致命动能弹等效模型构建与对比研究 [J/OL ] . 国防科技大学学报 ( 2026-01-15 )[ 2026-01-29 ] . https://link.cnki.net/urlid/43.1067.T.20260114.1343.002 https://link.cnki.net/urlid/43.1067.T.20260114.1343.002 .

Zhang Z H , Wang S , Yang X Y , et al . Equivalent model construction and comparative study of a 38mm composite non-lethal kinetic energy projectile [J/OL ] . Journal of National University of Defense Technology ( 2026-01-15 )[ 2026-01-29 ] . https://link.cnki.net/urlid/43.1067.T.20260114.1343.002 https://link.cnki.net/urlid/43.1067.T.20260114.1343.002 . (in Chinese)

汪送 , 战仁军 . 全球枪发非致命弹药图鉴 [M ] . 西安 : 陕西科学技术出版社 , 2021 .

Wang S , Zhan R J . Global illustrated handbook of gun-launched non-lethal ammunition [M ] . Xi'an : Shaanxi Science and Technology Press , 2021 . (in Chinese)

汪送 . 防暴动能弹发展现状及趋势分析 [J ] . 兵器装备工程学报 , 2021 , 42 ( 4 ) : 6 - 11 .

Wang S . Analysis of the Development status and trends of riot kinetic energy projectiles [J ] . Journal of Ordnance Equipment Engineering , 2021 , 42 ( 4 ): 6 - 11 . (in Chinese)

Boumdouha N , Safidine Z , Boudiaf A . Preparation of nonlethal projectiles by polyurethane foam with the dynamic and microscopic characterization for risk assessment and management [J ] . ACS Omega , 2022 , 7 ( 18 ): 16211 - 16221 .

潘腾 , 卞晓兵 , 袁名正 , 等 . 爆炸冲击波作用下聚氨酯-半球夹芯结构的动态响应 [J ] . 兵工学报 , 2023 , 44 ( 12 ): 3580 - 3589 .

Pan T , Bian X B , Yuan M Z , et al . Dynamic response of polyurethane-hemisphere sandwich structures under explosive shockwaves [J ] . Acta Armamentarii , 2023 , 44 ( 12 ): 3580 - 3589 . (in Chinese)

Boumdouha N , Duchet-Rumeau J , Gerard J F , et al . Research on the dynamic response properties of nonlethal projectiles for injury risk assessment [J ] . ACS Omega , 2022 , 7 ( 50 ): 47129 - 47147 .

Bracq A , Delille R , Maréchal C , et al . On the use of a SEBS polymer gel block as a new ballistic target to assess blunt ballistic impacts: Application to a wide range of LLKE projectiles [J ] . International Journal of Impact Engineering , 2021 , 153 : 103874 .

Ouyang D H , LI Z , ZHANG Q T , et al . Impact response of dynamic coupling between aramid fabric mesoscopic model and soft tissue [J ] . Polymer Testing , 2025 : 109081 .

Alruwaili E , Galal O H . Uncertainty propagation for power-law, bingham, and casson fluids: a comparative stochastic analysis of a class of non-newtonian fluids in rectangular ducts [J ] . Mathematics , 2025 , 13 ( 18 ): 3030 .

肖淞铭 , 常利军 , 李涛 , 等 . 非致命动能弹冲击下胸部力学响应与损伤分析 [J ] . 兵器装备工程学报 , 2025 , 46 ( 10 ) : 218 - 226 .

Xiao S M , Chang L J , Li T , et al . Analysis of thoracic mechanical response and injury under non-lethal kinetic energy projectile impact [J ] . Journal of Ordnance Equipment Engineering , 2025 , 46 ( 10 ): 218 - 226 . (in Chinese)

Nsiampa N , Robbe C , Papy A . Non-lethal projectile characterisation method:application to 40-mm SIR-X and condor NT901 projectiles [J ] . Human Factors and Mechanical Engineering for Defense and Safety , 2018 , 2 ( 1 ): 7 .

Chen C M , Zhao F D , Ma Z M . Numerical analysis of thorax injury caused by the blunt impact of SIR-X sponge grenade [J ] . Human Factors and Mechanical Engineering for Defense and Safety , 2023 , 7 : 2 .

张昭晖 , 汪送 , 刘星雨 , 等 . 非致命动能弹SIR-X有限元模型构建 [J ] . 火力与指挥控制 , 2025 , 50 ( 7 ): 61 - 70 .

Zhang Z H , Wang S , Liu X Y , et al . Finite element model construction of the non-lethal kinetic energy projectile SIR-X [J ] . Fire Control & Command Control , 2025 , 50 ( 7 ): 61 - 70 . (in Chinese)

Nsiampa N . Numerical assessment of non-lethal projectile thoracic impacts [D ] . Brussels, Belgium : Royal Military Academy & University of Liège , 2016 .

Sahoo D , Robbe C , Deck C , et al . Head injury assessment of non-lethal projectile impacts: a combined experimental/computational method [J ] . Injury , 2016 , 47 ( 11 ): 2424 - 2441 .

de La Calle-Arroyo C , Leorato S , Rodríguez-Aragón L J , et al . Augmented designs to choose between constant absolute and relative errors and to estimate model parameters [J ] . Chemometrics and Intelligent Laboratory Systems , 2025 , 261 : 105362 .

刘彦 , 王百川 , 闫俊伯 , 等 . 侵彻作用下负泊松比蜂窝夹芯结构动态响应 [J ] . 兵工学报 , 2023 , 44 ( 7 ): 1938 - 1953 .

Liu Y , Wang B C , Yan J B , et al . Dynamic response of negative Poisson's ratio honeycomb sandwich structure under penetration loading [J ] . Acta Armamentarii , 2023 , 44 ( 7 ): 1938 - 1953 . (in Chinese)

浏览量

下载量

CNKI被引量

文章被引用时，请邮件提醒。

提交

工具集

关联资源

面向钝性弹道冲击损伤评估的头部有限元模型

原位生长的镁合金表面自封孔微弧氧化涂层耐蚀性调控

基于技能迁移和意图识别的遥操作焊接控制系统

可重构无人车辆桥模块单元统一动力学建模与多模式运动特性

复杂空间约束下的高质高效管路装配路径规划方法