基于参数化模型的侵彻战斗部数字化设计平台开发

宋海生; 郑晓波; 彭小娜; 何雨; 高贵山; 桂毓林; 陈咏龙

doi:10.12382/bgxb.2025.0897

您当前的位置：

首页 >

文章列表页 >

基于参数化模型的侵彻战斗部数字化设计平台开发

更新时间：2026-02-10

- 基于参数化模型的侵彻战斗部数字化设计平台开发
- Development of a Digital Design Platform for Penetrating Warheads based on Parametric Modeling
- 兵工学报 2025年46卷第S2期页码：250897
- 作者机构：
  
  中国工程物理研究院流体物理研究所, 四川绵阳 621900
- 作者简介：
  
  * 邮箱: 258167878@qq.com
- 基金信息：
- DOI：10.12382/bgxb.2025.0897
  中图分类号：
- 收稿：2025-09-30，
  
  网络首发：2026-02-03，
  
  纸质出版：2025
- 稿件说明：
移动端阅览
宋海生, 郑晓波, 彭小娜, 等. 基于参数化模型的侵彻战斗部数字化设计平台开发[J]. 兵工学报, 2025,46(S2):250897.

Haisheng SONG, Xiaobo ZHENG, Xiaona PENG, et al. Development of a Digital Design Platform for Penetrating Warheads based on Parametric Modeling[J]. Acta Armamentarii, 2025, 46(S2): 250897.
宋海生, 郑晓波, 彭小娜, 等. 基于参数化模型的侵彻战斗部数字化设计平台开发[J]. 兵工学报, 2025,46(S2):250897. DOI： 10.12382/bgxb.2025.0897.

Haisheng SONG, Xiaobo ZHENG, Xiaona PENG, et al. Development of a Digital Design Platform for Penetrating Warheads based on Parametric Modeling[J]. Acta Armamentarii, 2025, 46(S2): 250897. DOI： 10.12382/bgxb.2025.0897.

摘要

为实现侵彻战斗部参数化建模-性能评估的全流程设计

基于NX知识融合技术构建数字化设计平台;该平台采用几何尺寸关联理念

建立3类典型构型参数化模型并配套试验验证参数库

通过规则程序完成建模自动化校验

同时依托Forrestal侵彻理论

结合历史试验数据修正关键系数

构建结构强度-侵彻能力耦合模型

实现理论与工程经验的深度耦合;实践表明

平台可有效提升设计可靠性与预测精度、缩短研发周期

其技术路线与方法论可为军工装备数字化设计提供借鉴。

Abstract

To achieve the full-process design of parametric modeling and performance evaluation for penetrating warheads

a digital design platform is developed based on NX knowledge fusion technology.The geometric dimension correlation design concept is adopted for the platform.The parametric models for three types of typical configurations and a supporting experiment-verified geometric parameter database are established

and the automatic modeling verification is realized through rule-based programs.Meanwhile

based on the Forrestal penetration theory

the key coefficients are modified using historical test data

and a coupled model of structural strength and penetration capability is constructed

thus achieving the deep integration of theoretical formulas and engineering experience.Practice shows that the digital design platform can effectively improve the design reliability and prediction accuracy and shorten the research and development cycle

and its technical route and methodology can provide a reference for the digital design of military equipment.

关键词

Keywords

references

宋锋 , 蒋建伟 . 杀爆战斗部设计专家系统研究 [J ] . 弹箭与制导学报 , 2007 , 27 ( 4 ): 119 - 123 .

SONG F , JIANG J W . Research on the expert design system of blast and fragmentation warhead [J ] . Journal of Projectiles,Rockets,Missiles and Guidance , 2007 , 27 ( 4 ): 119 - 123 . (in Chinese)

梁鹏程 , 王中伟 , 江振宇 , 等 . 聚能破甲战斗部参数建模技术研究 [J ] . 弹箭与制导学报 , 2007 , 27 ( 3 ): 119 - 122 .

LIANG P C , WANG Z W , JIANG Z Y , et al. Parametric modeling on shaped charge-warhead [J ] . Journal of Projectiles,Rockets,Missiles and Guidance , 2007 , 27 ( 3 ): 119 - 122 . (in Chinese)

高景龙 . 基于人工智能的榴弹设计专家系统的研究 [D ] . 成都 : 电子科技大学 , 2013 .

GAO J L . Research on explosive shell expert system based on artificial intelligence [D ] . Chengdu : University of Electronic Science and Technology of China , 2013 . (in Chinese)

张晓东 , 曹红松 , 袁毓雯 , 等 . 火箭弹数字化设计技术研究 [J ] . 弹箭与制导学报 , 2017 , 37 ( 6 ): 40 - 44 .

ZHANG X D , CAO H S , YUAN Y W , et al. Research on digital design of rocket [J ] . Journal of Projectiles,Rockets,Missiles and Guidance , 2017 , 37 ( 6 ): 40 - 44 . (in Chinese)

黄文通 , 陆静 , 王家宁 , 等 . 引信机构智能设计系统研究 [J ] . 机械科学与技术 , 2017 , 36 ( 1 ): 17 - 22 .

HUANG W T , LU J , WANG J N , et al. Research on intelligent design system of the fuze mechanism [J ] . Mechanical Science and Technology for Aerospace Engineering , 2017 , 36 ( 1 ): 17 - 22 . (in Chinese)

高鹏 , 徐豫新 , 李可 , 等 . 火箭杀爆弹动爆毁伤幅员计算方法与可视化仿真实现 [J ] . 兵工学报 , 2016 , 37 ( 增刊2 ): 216 - 220 .

GAO P , XU Y X , LI K , et al. Calculation of dynamic blast damage footprint for rocket-fragmentation warheads and visual simulation implementation [J ] . Acta Armamentarii , 2016 , 37 ( S2 ): 216 - 220 . (in Chinese)

赵洪志 , 张建 , 梁振刚 , 等 . 预制破片杀爆战斗部威力准确评估研究 [J ] . 计算机仿真 , 2020 , 37 ( 1 ): 15 - 21 .

ZHAO H Z , ZHANG J , LIANG Z G , et al. Research on power accurate evaluation of the blast-fragmentation warhead with preformed fragments [J ] . Computer Simulation , 2020 , 37 ( 1 ): 15 - 21 . (in Chinese)

常慧杰 . 爆炸冲击波对舰船目标内部结构毁伤的可视化仿真研究 [D ] . 北京 : 北京理工大学 , 2016 .

CHANG H J . Research on visual simulation of explode shock wave damaging ship internal structure [D ] . Beijing : Beijing Institute of Technology , 2016 . (in Chinese)

刘岩 . 典型杀爆战斗部参数化建模与威力场分析 [D ] . 西安 : 西安工业大学 , 2021 .

LIU Y . Parametric model and power field analysis of typical blast-fragmentation warhead [D ] . Xi’an:Xi’an Technological University,2021. (in Chinese)

刘建钊 , 花锋 . 知识融合程序设计与开发—基于NX软件系统 [M ] . 北京 : 电子工业出版社 , 2015 .

LIU J Z , HUA F . Program design and development of knowledge fusion—based on NX software system [M ] . Beijing : Publishing House of Electronics Industry , 2015 . (in Chinese)

徐海洋 , 韩文仲 , 李洋 , 等 . 基于知识融合的航天贮箱法兰类产品快速建模技术研究 [J ] . 制造业自动化 , 2017 , 39 ( 9 ): 127 - 148 .

XU H Y , HAN W Z , LI Y , et al. Research on rapid modeling technology of aerospace tank flange products based on knowledge fusion [J ] . Manufacturing Automation , 2017 , 39 ( 9 ): 127 - 148 . (in Chinese)

赵津 , 梁金雄 , 田忠殿 , 等 . 基于NX知识融合的T型吊舱推进器轴系参数化建模 [J ] . 机电设备 , 2024 , 41 ( 3 ): 96 - 101 .

ZHAO J , LIANG J X , TIAN Z D , et al. Parametric modeling of T-type podder propeller shafting based on NX knowledge fusion [J ] . Mechanical and Electrical Equipment , 2024 , 41 ( 3 ): 96 - 101 . (in Chinese)

张立杰 , 梁增友 , 马林 . 钻地弹战斗部技术特点及发展趋势 [J ] . 机械 , 2012 , 39 ( 4 ): 1 - 5 .

ZHANG L J , LIANG Z Y , MA L . Technical characteristics and trends of development of earth penetrator warhead [J ] . Machinery , 2012 , 39 ( 4 ): 1 - 5 . (in Chinese)

王浩 , 陶如意 . 截卵形弹头对混凝土靶侵彻性能的试验研究 [J ] . 爆炸与冲击 , 2005 , 25 ( 2 ): 171 - 175 .

WANG H , TAO R Y . Experimental study on the penetration performance of truncated-ogive nose projectile [J ] . Explosion and Shock Waves , 2005 , 25 ( 2 ): 171 - 175 . (in Chinese)

WU H J , WANG Y N , HUANG F L . Penetration concrete targets experiments with non-ideal & high velocity between 800 and 1100m/s [J ] . International Journal of Modern Physics B , 2008 , 22 ( 9 ): 1087 - 1093 .

马兆芳 , 段卓平 , 欧卓成 . 尾裙对弹体斜侵彻混凝土薄靶弹道的影响规律研究 [J ] . 北京理工大学学报 , 2015 , 35 ( 6 ): 576 - 579 ,584.

MA Z F , DUAN Z P , OU Z C , et al. Investigation on the influence rules of the tapered tail projectile penetration into thin concrete target [J ] . Transactions of Beijing Institute of Technology , 2015 , 35 ( 6 ): 576 - 579 ,584. (in Chinese)

FORRESTAL M J , ALTMAN B S , CARIGILE J D , et al. A empirical equation for penetration depth of ogive nose projectile into concrete targets [J ] . International Journal of Impact Engineering , 1994 , 15 ( 4 ): 395 - 405 .

刘云飞 , 王天运 , 蒋沧如 . 弹体侵彻混凝土深度计算公式分析 [J ] . 武汉理工大学学报 , 2004 , 26 ( 1 ): 49 - 52 .

LIU Y F , WANG T Y , JIANG C R . Analysis on depth calculation of projectiles penetration into concrete [J ] . Journal of Wuhan University of Technology , 2004 , 26 ( 1 ): 49 - 52 . (in Chinese)

蒋浩征 , 周兰庭 , 蔡汉文 . 火箭战斗部设计原理 [M ] . 北京 : 国防工业出版社 ,1982.

JIANG H Z , ZHOU L T , CAI H W . Design principles of rocket warhead [M ] . Beijing : National Defense Industry Press ,1982. (in Chinese)

陈小伟 . 动能深侵彻弹的力学设计(I):侵彻/穿甲理论和弹体壁厚分析 [J ] . 爆炸与冲击 , 2005 , 25 ( 6 ): 499 - 505 .

CHEN X W . Mechanics of structural design of EPW(I):The penetration/perforation theory and the analysis on the cartridge of projectile [J ] . Explosion and Shock Waves , 2005 , 25 ( 6 ): 499 - 505 . (in Chinese)

浏览量

下载量

CNKI被引量

文章被引用时，请邮件提醒。

提交

工具集

关联资源

侵彻战斗部-引信宽频域加载特性

Increasing analyzable steel thickness for thin layer activation experiments

Optimization of the S-band side-coupled cavities for proton acceleration

Recent studies on potential accident-tolerant fuel-cladding systems in light water reactors

Spin coating of TPB film on acrylic substrate and measurement of its wavelength shifting efficiency