某大口径补弹装置用高转矩密度嵌入式外转子电机驱动单元设计与多目标优化

赵常乐; 佟明昊; 羊柳; 徐亚栋; 鲁俊杰; 张家成

doi:10.12382/bgxb.2025.0518

您当前的位置：

首页 >

文章列表页 >

某大口径补弹装置用高转矩密度嵌入式外转子电机驱动单元设计与多目标优化

更新时间：2026-06-16

- 某大口径补弹装置用高转矩密度嵌入式外转子电机驱动单元设计与多目标优化
- Design and Multi-objective Optimization of a High-torque-density Embedded Outer Rotor Motor Drive Unit for Large-caliber Ammunition Reloading Systems
- 兵工学报 2026年47卷第5期页码：250518
- 作者机构：
  
  南京理工大学机械工程学院，江苏南京 210094
- 作者简介：
  
  通信作者邮箱：mtong@njust.edu.cn
- 基金信息：
  
  国家自然科学基金项目(52307059)
- DOI：10.12382/bgxb.2025.0518
  中图分类号： TJ301
- 收稿：2025-06-18，
  
  网络首发：2026-02-13，
  
  纸质出版：2026-05
- 稿件说明：
移动端阅览
赵常乐, 佟明昊, 羊柳, 等. 某大口径补弹装置用高转矩密度嵌入式外转子电机驱动单元设计与多目标优化[J]. 兵工学报, 2026,47(5):250518.

ZHAO Changle, TONG Minghao, YANG Liu, et al. Design and Multi-objective Optimization of a High-torque-density Embedded Outer Rotor Motor Drive Unit for Large-caliber Ammunition Reloading Systems[J]. Acta Armamentarii, 2026, 47(5): 250518.
赵常乐, 佟明昊, 羊柳, 等. 某大口径补弹装置用高转矩密度嵌入式外转子电机驱动单元设计与多目标优化[J]. 兵工学报, 2026,47(5):250518. DOI： 10.12382/bgxb.2025.0518.

ZHAO Changle, TONG Minghao, YANG Liu, et al. Design and Multi-objective Optimization of a High-torque-density Embedded Outer Rotor Motor Drive Unit for Large-caliber Ammunition Reloading Systems[J]. Acta Armamentarii, 2026, 47(5): 250518. DOI： 10.12382/bgxb.2025.0518.

摘要

为匹配大口径火炮补弹装置驱动单元

“

高扭低转

”

负载特性，并满足轻量化、严格空间约束的设计需求设计。设计了一款Halbach阵列的表贴式外转子永磁电机与内嵌的行星减速器构成的补弹装置驱动单元。为进一步提升驱动单元性能，并解决优化参数多导致的机电系统优化难度大的问题。提出了针对该驱动单元的电磁-传动耦合系统分层优化方法，以电磁系统定转子齿形、传动系统齿轮模数、齿数与变位系数等19个机电参数为优化参数，在空间与系统耦合的约束下对体积、效率与转矩进行多目标优化，实现驱动单元性能满足要求的前提下，直径缩减11 mm、效率提高4.31%、转矩波动减小36% 。最终根据优化结果制作实验样机与仿真结果对比分析，验证驱动单元优化设计的正确性。

Abstract

To match the“high-torque low-speed”load characteristics of drive unit for ammunition reloading system in large-caliber artillery and meet the design requirements of lightweight and strict spatial constraints，this paper designs a drive unit composed of a Halbach-array surface-mounted outer-rotor permanent magnet motor and an embedded planetary gear reducer. A hierarchical optimization method for the electromagnetic-transmission coupled system of this drive unit is proposed to further enhance the performance of the drive unit and address the challenge of optimizing the numerous parameters of electromechanical system. A multi-objective optimization of volume，efficiency and torque is conducted using 19 electromechanical parameters—including the stator and rotor tooth profiles of electromagnetic system，and the gear module，number of teeth and modification coefficients of transmission system—as optimization variables under spatial and system coupling constraints. The results show thatthe drive unit's diameter is reduced by 11 mm，its efficiency is increased by 4.31%，and the torque ripple is decreased by 36% while meeting performance requirements. Finally，an experimental prototype is fabricated based on the optimized results，and a comparative analysis with simulated results is conducted，verifying the correctness of the optimized design of the drive unit.

关键词

Keywords

references

单春来,侯立国,高华,等. 基于动力学仿真的某弹药输送车补弹时序优化[J]. 火炮发射与控制学报,2023,44(1):36-43.

SHAN C L, HOU L G, GAO H, et al. Optimization of ammunition replenishment timing sequence for an ammunition carrier based on dynamic simulation[J]. Journal of Gun Launch &Control, 2023, 44(1): 36-43.(in Chinese)

LIU G S, LIU H J, ZHU C C, et al. Design optimization of a wind turbine gear transmission based on fatigue reliability sensitivity [J]. Frontiers of Mechanical Engineering, 2021, 16(1): 61-79.

KIM S C, MOON S G, SOHN J H, et al. Macro geometry optimization of a helical gear pair for mass, efficiency, and transmission error[J]. Mechanism and Machine Theory, 2020, 144: 103634.

LU Z H, LIU C, LIAO C J, et al. Conceptual design and optimization of polymer gear system for low-thrust turbofan aeroengine accessory transmission [J]. Journal of Computational Design and Engineering, 2024, 11(1): 212-229.

PARMAR A, RAMKUMAR P, SHANKAR K. Macro geometry multi-objective optimization of planetary gearbox considering scuffing constraint[J]. Mechanism and Machine Theory, 2020, 154: 104045.

张秀华,刘怀举,胡明珠,等. 某空间机构内啮合复合行星齿轮传动系统设计与优化研究[J]. 宇航学报, 2024, 45(9):1376-1385.

ZHANG X H, LIU H J, HU M Z, et al. Design and optimization of internal gear-planetary gear compound transmission for a space mechanism[J]. Journal of Astronautics, 2024, 45(9): 1376 -1385.(in Chinese)

栗大林,华浩,李然,等. 高功率密度表嵌式磁极偏移永磁电动机转矩性能提升[J]. 上海交通大学学报, 2025, 59(9):1237-1248.

LI D L, HUAH,LIR, et al. Torque improvement for high power density machines with shifted surface-inserted permanent magnets [J]. Journal of Shanghai Jiaotong University, 2025, 59 (9):1237-1248. (in Chinese)

王晨,黄健,江明,等. 聚磁式永磁轮毂电机多目标优化设计[J]. 中国电机工程学报, 2024, 44(3): 1173-1184.

WANG C, HUANG J, JIANG M, et al. Multi-objective optimization and design of flux-concentrating permanent magnet in-wheel motor [J]. Proceedings of the CSEE, 2024, 44 (3 ):1173-1184. (in Chinese)

林玥兵, 郑晓钦, 陈春涛. 正弦削极修正模型的表贴式多相永磁电机模型-数据融合优化设计[J]. 中国电机工程学报, 2024, 44(增刊1): 296-305.

LIN Y B, ZHENG X Q, CHEN C T. Model and data complementary optimization design of surface mounted multiphase permanent magnet motors based on sinusoidal poling modified model[J]. Proceedings of the CSEE, 2024, 44(S1):296-305.(in Chinese)

刘洋, 宋宝, 周向东, 等. 轮辐式游标永磁电机分析与多目标优化设计[J]. 电机与控制学报, 2023, 27(9): 1-9.

LIU Y, SONG B, ZHOU X D, et al. Analysis and multi-objective optimization of spoke type Vernier permanent-magnet machine[J]. Electric Machines and Control, 2023, 27(9):1-9. (in Chinese)

王永嘉,郭建宁,张陶鹏,等. 弹用永磁直流力矩电机高频波动的优化设计[J]. 兵工学报, 2023, 44(5): 1365-1373.

WANG Y J, GUO J N, ZHANG T P, et al. Optimization design of high-frequency fluctuations of permanent magnet DC torque motor for missiles [J]. Acta Armamentarii, 2023, 44 (5 ):1365-1373.(in Chinese)

GE S S, QIU L H, ZHANG Z G, et al. Electromechanical coupling dynamic characteristics of electric drive system for electric vehicle [J]. Nonlinear Dynamics, 2024, 112 ( 8 ):6101-6136.

KWON K, JO J, MIN S. Multi-objective gear ratio and shifting pattern optimization of multi-speed transmissions for electric vehicles considering variable transmission efficiency[J]. Energy, 2021, 236: 121419.

何智成,谢泽军,刘侃,等. 纯电动汽车传动系统-电机结构参数协同设计优化[J]. 汽车工程, 2023, 45(11): 2113-2122.

HE Z C, XIE Z J, LIU K, et al. Collaborative design optimization of pure electric vehicle drivetrain and motor structure parameters [J]. Automotive Engineering, 2023, 45 ( 11 ):2113-2122.(in Chinese)

刘长钊,陈祥龙,罗键. 开关磁阻风力发电机-齿轮传动系统集成设计与分析[J]. 太阳能学报, 2023, 44(3): 111 -119.

LIU C Z, CHEN X L, LUO J. Integrated design and analysis of switched reluctance wind driven generator-gear transmission system[J]. Acta Energiae Solaris Sinica, 2023, 44(3): 111-119. (in Chinese)

胡明珠,刘怀举,张秀华,等. 空间机械臂关节双电机-行星齿轮传动系统的多目标优化[J]. 宇航学报, 2024, 45(12):2009-2023.

HU M Z, LIU H J, ZHANG X H, et al. Multi-objective optimization of dual motor planetary gear transmission system for space manipulator joint [J]. Journal of Astronautics, 2024, 45(12): 2009-2023.(in Chinese)

高锋阳,高建宁,李明明,等. 内置式Halbach永磁同步电机的参数敏感度分层优化设计[J]. 西安交通大学学报, 2022, 56(5): 180-190.

GAOFY, GAO J N, LI M M, et al. Optimization design of Halbach interior permanent magnet synchronous motor based on parameter sensitivity stratification[J]. Journal of Xi'an Jiaotong University, 2022, 56(5): 180-190.(in Chinese)

曹永娟,冯亮亮,毛瑞,等. 轴向磁场永磁记忆电机多目标分层优化设计[J]. 中国电机工程学报, 2021, 41 (6):1983-1992.

CAO Y J, FENG L L, MAO R, et al. Multi-objective stratified optimization design of axial-flux permanent magnet memory motor [J]. Proceedings of the CSEE, 2021, 41(6): 1983 -1992.(in Chinese)

颜建虎,李彪,时岩,等. 主动悬架用非均匀齿圆筒型永磁直线电机多目标分层优化设计[J]. 兵工学报, 2023, 44(1): 40-50.

YAN J H, LI B, SHI Y, et al. Multi-objective stratified optimization design of tubular permanent magnet linear motors with nonuniform teeth for active suspension [J]. Acta Armamentarii, 2023, 44(1): 40-50.(in Chinese)

刘广孚,于建宗,郭亮,等. 基于SVM的双辅助永磁体Halbach阵列潜油永磁同步电机优化设计[J].中国石油大学学报(自然科学版), 2023, 47(3): 164-172.

LIU G F,YUJZ,GUOL, et al. Optimal design of submersible permanent magnet synchronous motor with double-assisted permanent magnet Halbach array based on SVM[J]. Journal of China University of Petroleum ( Edition of Natural Science), 2023, 47(3): 164-172.(in Chinese)

中华人民共和国国家质量检验检疫总局,中国国家标准化管理委员会. 行星齿轮传动设计方法: GB/T33293—2017[S].北京:中国标准出版社, 2018.

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China. Design methods for planetary gear drives: GB/T33293—2017 [S]. Beijing: Standards Press of China, 2018. (in Chinese)

浏览量

下载量

CNKI被引量

文章被引用时，请邮件提醒。

提交

工具集

关联资源

面向智慧座舱的具身多模态交互式融合方法

基于大语言模型与推理行为的滚动轴承设计智能体开发

刚性多弹丸对铝合金靶同时多重撞击效应

面向空基侦察平台的轻量化多通道军事小目标检测算法

小口径三维枪管系统瞬态热效应及其与热偏关系