张小兵.枪炮内弹道[M].北京：北京理工大学出版社,2014.

ZHANG X B. Interior ballistics of guns[M]. Beijing: Beijing Institute of Technology Press,2014. (in Chinese)

张小兵,薛涛.内弹道学发展与展望[J].南京理工大学学报, 2023,47(4):446-460.

ZHANG X B, XUE T. Developments and prospects of interior ballistics[J]. Journal of Nanjing University of Science and Technology,2023,47(4):446-460. (in Chinese)

刘宁,张相炎.基于遗传算法的火炮内弹道参数修正[J].弹箭与制导学报,2006,26(增刊4):772-774.

LIU N,ZHANG X Y. Interior ballistic parameters updating based on genetic algorithms[J]. Journal of Projectiles,Rockets,Missiles and Guidance,2006,26(S4):772-774. (in Chinese)

程诚,张小兵.内弹道两相流三维并行数值模拟[J].兵工学报,2019,40(4):769-776.

CHENG C,ZHANG X B. Parallel numerical simulation on three-dimensional two-phase flow of interior ballistic trajectory[J]. Acta Armamentarii,2019,40(4):769-776. (in Chinese)

HU C B,ZHANG X B. A thermal compensated model for predicting the internal combustion of energetic materials in a combustion chamber[J]. Applied Thermal Engineering, 2019, 162 (5):114237.

HU C B,ZHANG X B. Influence of multiple structural parameters on interior ballistics based on orthogonal test methods[J]. Defence Technology,2019,15(5):690-697.

张胜民,刘云赋.一种基于“GM(1,1)”模型的火炮初速灰预测方法[J].指挥控制与仿真,2007,29(5):67-69.

ZHANG S M,LIU Y F. Kind of the muzzle velocity grey prediction method based on the GM(1,1) model[J]. Command Control &Simulation,2007,29(5):67-69. (in Chinese)

ONGARO F, ROBBE C, PAPY A, et al. Modelling of internal ballistics of gun systems:a review[J]. Defence Technology,2024, 41:35-58.

金志明.枪炮内弹道学[M].北京：北京理工大学出版社,2004.

JIN Z M.Interior ballistics of guns[M]. Beijing:Beijing Institute of Technology Press,2004. (in Chinese)

鲍廷钰,邱文坚.内弹道学[M].北京：北京理工大学出版社,1995.

BAO T Y, QIU W J. Interior ballistics[M]. Beijing: Beijing Institute of Technology Press,1995. (in Chinese)

金志明.高速推进内弹道学[M].北京：国防工业出版社, 2001.

JIN Z M. Interior ballistics of hypervelocity propulsion [M].Beijing:National Defense Industry Press,2001.（in Chinese）

张小兵,彭振伟,王力,等.串联双药室火炮经典内弹道模型及数值模拟[J].南京理工大学学报,1999,23(2):101-104.

ZHANG X B,PENG Z W,WANG L,et al. A classical model of serial double chamber gun and its numerical simulation[J]. Journal of Nanjing University of Science and Technology,1999, 23(2):101-104. (in Chinese)

王颖泽,张小兵,袁亚雄.膨胀波火炮后喷装置流场性能分析[J].兵工学报,2009,30(5):525-530.

WANG Y Z, ZHANG X B, YUAN Y X. Analysis of flow field performance back blast mechanism for rarefaction wave gun[J]. Acta Armamentarii,2009,30(5):525-530. (in Chinese)

季新源,袁亚雄,张小兵,等.超高射频武器系统的设计与分析[J].兵工学报,2007,28(8):1021-1024.

JI X Y,YUAN Y X,ZHANG X B,et al. Design and investigation of hyper firing-rate gun[J]. Acta Armamentarii,2007,28(8):1021-1024. (in Chinese)

罗乔,张小兵.基于FLUENT软件和内弹道模型双向耦合的超高射频火炮发射过程模拟[J].兵工学报,2016,37(10):1949-1955.

LUO Q,ZHANG X B. Simulation for launch process of ultrahigh firing rate guns based on two-way coupling of FLUENT and interior ballistic model[J]. Acta Armamentarii,2016,37(10):1949-1955. (in Chinese)

杨均匀,金志明,张小兵.一级轻气炮内弹道数值模拟[J].弹道学报,1998,10(4):25-29.

YANG J Y, JIN Z M, ZHANG X B. Numerical simulation of interior ballistic process of a first stage light gas gun[J]. Journal of Ballistics,1998,10(4):25-29. (in Chinese)

郁伟,朱斌,张小兵.耦合内弹道过程的膛口流场数值模拟与分析[J].南京理工大学学报,2009,33(3):335-338,343.

YU W,ZHU B,ZHANG X B. Numerical simulation and analysis of muzzle flow field coupling with interior ballistic process[J]. Journal of Nanjing University of Science and Technology,2009, 33(3):335-338,343. (in Chinese)

李克婧,张小兵.混合装药内弹道性能优化及应用[J].火炸药学报,2011,34(6):74-79.

LI K J, ZHANG X B. Optimization and application of interior ballistic performance with mixed charge[J]. Chinese Journal of Explosives & Propellants,2011,34(6):74-79. (in Chinese)

李克婧,张小兵.改进型实数编码遗传算法在内弹道优化中的应用[J].弹道学报,2009,21(3):19-22.

LI K J,ZHANG X B. Application of improved real-coded genetic algorithm in interior ballistic optimization[J].Journal of Ballistics,2009,21(3):19-22. (in Chinese)

赵小亮,张小兵.管状发射药内孔侵蚀燃烧与流动特性[J].含能材料,2019,27(3):202-209.

ZHAO X L,ZHANG X B. Internal perforation erosive burning and flow characteristics of tubular propellant[J]. Chinese Journal of Energetic Materials,2019,27(3):202-209. (in Chinese)

HE H Z,ZHANG X B. Local high temperature phenomena near the complex interfaces of thermal barrier coatings based on non-Fourier model[J]. International Communications in Heat and Mass Transfer,2024,159(Part A):107940.

ZHANG Y D,XUE T,ZHANG X B. Investigation of heat transfer in cracked gun barrels[J]. International Journal of Thermal Sciences,2024,201:109024.

LI T Y,ZHANG X B. Laser ignition process of energetic particles under consideration of non-Fourier effect[J]. Propellants, Explosives,Pyrotechnics,2022,47(9):e202200112.

林庆华,栗保明.电热化学炮内弹道过程的势平衡分析[J].兵工学报,2008,29(4):487-490.

LIN Q H, LI B M. Potential equilibrium analysis of interior ballistic processes in electro-thermal chemical gun[J]. Acta Armamentarii,2008,29(4):487-490. (in Chinese)

师军飞,钱林方,陈红彬,等.埋头弹高速冲击挤进入膛特性研究[J].兵工学报,2023,44(3):656-669.

SHI J F, QIAN L F, CHEN H B, et al. High-speed impact engraving characteristics of cased telescoped ammunition[J]. Acta Armamentarii,2023,44(3):656-669. (in Chinese)

CHENG S S,TAO R Y,LU X G,et al. Numerical simulation of interior ballistics two-phase flow in modular charge based on the particle element method[J]. Case Studies in Thermal Engineering,2024,61:105121.

刘宁,高永峰,於永硕,等.液体发射药迫击炮低压发射性能的数值及实验研究[J].弹道学报,2023,35(3):89-94.

LIU N, GAO Y F, YU Y S, et al. Numerical and experimental research on low-pressure launching performances of liquid propellant mortar[J].Journal of Ballistics,2023,35(3):89-94. (in Chinese)

袁亚雄,张小兵.高温高压多相流体动力学基础[M].哈尔滨：哈尔滨工业大学出版社,2005.

YUAN Y X,ZHANG X B. Multiphase hydrokinetic foundation of high temperature and high pressure[M]. Harbin:Harbin Institute of Technology Press,2005. (in Chinese)

GOUGH P, ZWARTS F. Modeling heterogeneous two-phase reacting flow[J]. AIAA Journal,1979,17(1):17-25.

MIURA H, MATSUO A, NAKAMURA Y. Multi-dimensional simulation on ignition stage of granular solid propellant varying primer configuration[J]. International Journal of Energetic Materials and Chemical Propulsion,2008,7(6):507-522.

MIURA H,MATSUO A,NAKAMURA Y. Numerical prediction of interior ballistics performance of projectile accelerator by solid/gas two-phase reacting flow simulation[C]∥Proceedings of the 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition. Orlando, FL, US:AIAA,2010:4-7.

JARAJMAZ S,MICKOVICI D,ELEK P. Two-phase flows in gun barrel: Theoretical and experimental studies[J]. International Journal of Multiphase Flow,2011,37(5):475-487.

张小兵,袁亚雄.基于两相流方程的内弹道相似性分析[J].弹道学报,1995,7(3):1-5.

ZHANG X B,YUAN Y X. Similarity analysis of interior ballistics process based on two-phase flow equations[J]. Journal of Ballistics,1995,7(3):1-5. (in Chinese)

HU C B, ZHANG X B. A fluid-structure coupling method to obtain parameter distributions in a combustion chamber with moving boundaries[J]. Applied Thermal Engineering,2018,141:1048-1054.

SUN Y J,ZHANG X B. A hybrid strategy of lattice Boltzmann method and finite volume method for combined conduction and radiation in irregular geometry[J]. International Journal of Heat and Mass Transfer,2018,121:1039-1054.

孙玉佳,张小兵.耦合内弹道两相流模型的炮管热安全性研究[J].兵器装备工程学报,2022,43(7):115-120.

SUN Y J, ZHANG X B. Thermal safety analysis of gun barrel based on two-phase interior ballistics models[J]. Journal of Ordnance Equipment Engineering,2022,43(7):115-120. (in Chinese)

HU C B,ZHANG X B. A Coupled computational framework for the transient heat transfer in a circular pipe heated internally with expanding heat sources[J]. Journal of Pressure Vessel Technology,2020,142(6):061401.

WANG Y T, DING S K, ZHANG X B. A novel structure for improving the service life of a propulsion system by controlling two-phase reactive flow[J]. Powder Technology, 2024, 433:119221.

WANG Y T,ZHANG X B. Numerical investigation on muzzle flow characteristics for small combustion chamber with embedded propelled body[J]. Structures,2023,50:1783-1793.

张小兵,袁亚雄,任如海.含能材料激光点火性能研究[J].兵工学报,2002,23(1):23-26.

ZHANG X B, YUAN Y X, REN R H. Experimental and theoretical study on the performance of laser ignition of energetic materials[J]. Acta Armamentarii,2002,23 (1):23-26. (in Chinese)

林杨淦,刘东尧.低温破碎及装药结构对内弹道性能影响的数值分析[J].火炸药学报,2024,47(4):381-392.

LIN Y G, LIU D Y. Numerical analysis of effects of low temperature crushing and charge structure on interior ballistic properties crushing[J]. Chinese Journal of Explosives &Propellants,2024,47(4):381-392. (in Chinese)

KUO K K,SUMMERFIELD M. Theory of steady-state burning of gas-permeable propellants[J]. AIAA Journal, 1974, 12 (1):49-56.

BAER M,NUNZIATO J W. A two-phase mixture theory for the deflagration-to-detonation transition (DDT) in reactive granular materials[J]. International Journal of Multiphase Flow,1986, 12(6):861-889.

SAUREL R, ABGRALL R. A multiphase Godunov method for compressible multifluid and multiphase flows[J]. Journal of Computational Physics,1999,150:425-467.

SUNG H G, JANG J S, ROH T S. Application of Eulerian-Lagrangian approach to gas-solid flows in interior ballistics[J]. Journal of Applied Mechanics,2013,80(3):031407.

JANG J S,SUNG H G, ROH T S, et al. Numerical analysis of interior ballistics through Eulerian-Lagrangian approach[J]. Journal of Mechanical Science & Technology, 2013, 27 (8):2351-2357.

FLORIO L A. Direct particle motion and interaction modeling method applied to simulate propellant burn[J]. Applied Mathematical Modelling,2013,37(8):5606-5626.

张小兵,翁春生,金志明,等.混合颗粒床中颗粒轨道模型及其数值模拟[J].工程力学,1998,15(2):129-137.

ZHANG X B,WENG C S,JIN Z M,et al. The particle trajectory model and simulation in composite particle bed[J]. Engineering Mechanics,1998,15(2):129-137. (in Chinese)

CHEN Q, ZHANG X B, ZHANG J F. Improved treatments for general boundary conditions in the lattice Boltzmann method for convection-diffusion and heat transfer processes[J]. Physical Review E,2013,88:033304.

KAGANKIEWICZ F, MAGIER M. Mathematical formulation for the numerical solution of the internal ballistics of classical weapons in Lagrangian coordinates[J]. Continuum Mechanics and Thermodynamics,2024,36:1147-1168.

KAGANKIEWICZ F,MAGIER M. Experimental verification of the internal ballistics numerical simulations of classical weapons in Lagrangian coordinates[J]. Computational Mechanics of Materials,2024,36:1323-1337.

马天一,陶如意,周思渊,等.模块装药短管炮实验及数值模拟研究[J].弹道学报,2024,36(2):44-52.

MA T Y,TAO R Y,ZHOU S Y,et al. Experimental and numerical simulation study of short-barrel gun with modular charges[J]. Journal of Ballistics,2024,36(2):44-52. (in Chinese)

何新佳,马中亮,代淑兰.改进萤火虫算法在混合装药内弹道性能优化中的应用[J].火炮发射与控制学报,2022, 43(3):26-32.

HE X J,MA Z L,DAI S L. Application of an improved firefly algorithm for optimizing the interior ballistic performance of a mixed charge[J]. Journal of Gun Launch & Control, 2022, 43(3):26-32. (in Chinese)

DONG X L, RUI X T, LI C. Interior ballistic two-phase flow model and its calculation for a mixed charge structure[J]. International Communications in Heat and Mass Transfer,2023, 144:106788.

赵小亮,张小兵.太根发射药气相总包化学反应模型及数值分析[J].哈尔滨工程大学学报,2021,42(4):548-554.

ZHAO X L, ZHANG X B. Combustion model of the triethyleneglycol dinitrate propellant gas combustion region based on global kinetics and numerical analysis[J]. Journal of Harbin Engineering University,2021,42(4):548-554. (in Chinese)

王宏金,宁变芳,张国平,等.埋头弹复合药筒抽壳闭气性能分析与改进设计[J].兵工学报,2024,45(增刊1):112-119.

WANG H J,NING B F,ZHANG G P,et al. Performance analysis and improved design of cartridge extracting and sealing of cased telescoped ammunitions[J]. Acta Armamentarii,2024,45(S1):112-119. (in Chinese)

熊佳敏,陆欣.发射药冲击破碎对埋头弹装药燃烧和内弹道性能影响的数值模拟[J].火炸药学报,2023,46(4):352-360.

XIONG J M,LU X. Numerical simulation of the effect of impact crushing of propellant grains on the combustion and internal ballistic of the CTA[J]. Chinese Journal of Explosives &Propellants,2023,46(4):352-360. (in Chinese)

尹秋霖,陈琦,王中原,等.考虑时空协同的滑翔制导炮弹单炮多发快速弹道规划[J].兵工学报,2024,45(3):798-809.

YIN Q L,CHEN Q,WANG Z Y,et al. Rapid trajectory planning for glide-guided projectiles in single-gun multi-shot scenarios considering time-spatial coordination[J]. Acta Armamentarii, 2024,45(3):798-809. (in Chinese)

刘朋展,王国强,苏精明,等.无人机载无后坐力枪内弹道性能数值模拟[J].兵工自动化,2024,43(10):11-13.

LIU P Z,WANG G Q,SU J M, et al. Numerical simulation of internal ballistics performance of recoilless gun equipped with UAV[J]. Ordnance Industry Automation,2024,43(10):11-13. (in Chinese)

王语涵,李志刚,曹从咏.大口径膨胀波火炮减后坐效率分析[J].火炮发射与控制学报,2022,43(2):20-25.

WANG Y H, LI Z G, CAO C Y. Analysis of recoil reduction efficiency of a large caliber rarefaction wave gun[J]. Journal of Gun Launch & Control,2022,43(2):20-25. (in Chinese)

张培忠,商飞,杭宇,等. “金属风暴”武器的耦合膛压测试弹设计[J].弹道学报,2022,34(1):83-88.

ZHANG P Z,SHANG F,HANG Y,et al. Design on measuring bullet of coupling bore pressure for metal storm weapon[J]. Journal of Ballistics,2022,34(1):83-88. (in Chinese)

胡斌,王震,何行,等.基于CFD的燃烧轻气炮发射过程仿真[J].舰船科学技术,2022,44(10):180-184.

HU B,WANG Z,HE X,et al. Simulation for launch process of combustion light gas gun based on CFD[J]. Ship Science and Technology,2022,44(10):180-184. (in Chinese)

ROTARIU A, TRANA E, MATACHE L, et al. A HiLo interior ballistic model based on the hypothesis of gases adiabatic transformation in the high-pressure chamber[J]. Case Studies in Thermal Engineering. 2023,45:102928.

赵伟,侯保林.电磁炮纤维缠绕约束结构多目标优化[J].兵工学报,2024,45(11):3820-3832.

ZHAO W, HOU B L. Multi-objective optimization of filament winding constrained structure of electromagnetic gun[J]. Acta Armamentarii,2024,45(11):3820-3832. (in Chinese)

马昌军,张小兵.基于改进两相流模型的模块装药内弹道模拟[J].兵工学报,2013,34(6):678-683.

MA C J,ZHANG X B. Interior ballistics simulation of modular propellant charge using an improved two-phase flow model[J]. Acta Armamentarii,2013,34(6):678-683. (in Chinese)

ELSADEK H,ZHANG X B,RASHAD M M,et al. Two phase flow modeling of the interior ballistics for a naval medium caliber gun with guided projectile[J]. Applied Mechanics & Materials,2013, 465:531-535.

WANG Y T,ZHANG X B. Influence of embedded structure on two-phase reactive flow characteristics for a small combustion chamber with a moving boundary[J]. Physics of Fluids,2024, 36(3):033339.

张小兵,袁亚雄,陈健,等.等离子体点传火过程两相流数值模拟[J].火炮发射与控制学报,2002(4):1-5.

ZHANG X B,YUAN Y X,CHEN J,et al. Numerical simulation of two-phase flow of plasma ignition process[J]. Journal of Gun Launch & Control,2002(4):1-5. (in Chinese)

李海庆,张小兵,李筱炜,等.激光多点点火二维两相流数值模拟[J].兵工学报,2012,32(3):257-260.

LI H Q,ZHANG X B,LI X W,et al. Two-dimensional two-phase flow numerical simulation of multi-point laser ignition[J]. Acta Armamentarii,2012,32(3):257-260. (in Chinese)

王颖泽,张小兵.膨胀波火炮两相流内弹道性能分析与数值模拟[J].兵工学报,2010,31(2):154-159.

WANG Y Z,ZHANG X B. Two-phase flow property analysis and numerical simulation of interior ballistics for rarefaction wave gun[J].Acta Armamentarii,2010,31(2):154-159. (in Chinese)

张小兵.高膛压火炮异常压力实验研究及数值模拟[D].南京：南京理工大学,1995.

ZHANG X B. Experimental study and numerical simulation of abnormal pressure of high chamber pressure artillery[D]. Nanjing:Nanjing University of Science and Technology,1995. (in Chinese)

王颖泽,张小兵,袁亚雄.膨胀波在火炮膛内传播规律的捕捉计算分析[J].弹道学报,2009,21(2):1-5.

WANG Y Z,ZHANG X B. Analysis of capturing calculation of propagation law about rarefaction wave in gun[J]. Journal of Ballistics,2009,21(2):1-5. (in Chinese)

LUO Q, ZHANG X B. Numerical simulation of serial launch process of multiple projectiles considering the aftereffect period[J]. International Journal of Numerical Methods for Heat & Fluid Flow,2017,27:1720-1734.

李海庆,张小兵,王艳.串联多药室火炮内弹道两相流数值模拟[J].兵工学报,2012,33(5):513-518.

LI H Q, ZHANG X B, WANG Y. Two phase flow numerical simulation of interior ballistics of the series chamber gun[J]. Acta Armamentarii,2012,33(5):513-518. (in Chinese)

申越,袁亚雄,张小兵.超高射频武器系统的内弹道一维两相流数值仿真[J].兵工学报,2005,26(5):600-604.

SHEN Y, YUAN Y X, ZHANG X B. One-dimension two-phase flow numerical simulation of interior ballistics for hyper firing-rate weapon system[J]. Acta Armamentarii,2005,26(5):600-604. (in Chinese)

倪志军,周克栋,赫雷,等. CTVD算法在金属风暴武器内弹道中的应用[J].弹道学报,2008,20(3):36-40.

NI Z J,ZHOU K D,HE L,et al. Application of CTVD algorithm in interior ballistics of metal storm weapon[J]. Journal of Ballistics,2008,20(3):36-40. (in Chinese)

赫雷,宋学平,倪志军,等.序贯装药金属风暴武器内弹道的两相流模型及数值模拟[J].兵工学报,2007,28(3):377-381.

HE L,SONG X P,NI Z J,et al. Interior-ballistic model of two-phase flow and numerical simulation of metal storm weapon system with powder loaded in serial mode[J]. Acta Armamentarii,2007, 28(3):377-381. (in Chinese)

邓飞,张相炎.燃烧轻气炮氢氧燃烧特性详细反应动力学模拟[J].兵工学报,2014,35(3):415-420.

DENG F, ZHANG X Y. Simulation of hydrogen-oxygen combustion of combustion light gas gun using detailed chemical kinetics model[J].Acta Armamentarii,2014,35(3):415-420. (in Chinese)

戴荣,栗保明.固体工质电热化学炮膛内两相流模型与计算[J].南京理工大学学报,2000,24(4):318-321,349.

DAI R,LI B M. Two-phase flow model and simulation of solid propellant electrothermal chemical gun[J]. Journal of Nanjing University of Science and Technology,2000,24(4):318-321, 349. (in Chinese)

梁雨霞,刘宁,於永硕,等.再生式液体发射药迫击炮点火过程建模与试验研究[J].火炮发射与控制学报,2024,45(4):82-88.

LIANG Y X,LIU N,YU Y S. Modeling and experimental study on the ignition process of regenerative liquid propellant mortar[J]. Journal of Gun Launch & Control, 2024, 45 (4): 82-88. (in Chinese)

丁彦超,王宝寿,吴文婷,等.水压驱动两级提拉式水下发射装置内弹道建模[J].兵工学报,2024,45(2):594-605.

DING Y C,WANG B S,WU W T,et al. Modeling of interior trajectory of water-driven underwater launch device with two-stage piston[J]. Acta Armamentarii,2024,45(2):594-605. (in Chinese)

SUMAN V K, SUNDARAM P, SENGUPTA S, et al. A new compact scheme-based Lax-Wendroff method for high fidelity simulations[J]. Computers & Fluids,2024,276:106262.

HU C B, ZHANG X B. Performance variation of a transient dynamic fluid-structure interaction system in different life stages and methods for maintaining the performance[J]. Applied Thermal Engineering,2018,130:1012-1021.

SUN Y J,ZHANG X B. Contributions of gray gases in SLW for non-gray radiation heat transfer and corresponding accuracies of FVM and P1 method[J]. International Journal of Heat and Mass Transfer,2018,121:819-831.

NGONDIEP E. A posteriori error estimate of MacCormack rapid solver method for two-dimensional incompressible Navier-Stokes problems[J]. Journal of Computational and Applied Mathematics, 2024,438:115569.

刘子豪,刘东尧.底火两相射流在传火管内传播过程的一维模型及数值模拟[J].弹道学报,2018,30(4):66-70.

LIU Z H, LIU D Y. One-dimensional model and numerical simulation of propagation process of two-phase primer jet-flow in ignition tube[J].Journal of Ballistics,2018,30(4):66-70. (in Chinese)

森思义,王浩,陶如意.基于CE/SE方法对模块装药点传火过程的数值模拟及特性研究[J].含能材料,2022,30(7):744-751.

SENG S Y, WANG H, TAO R Y. Numerical simulation and characteristics analysis on ignition and flame-propagation process of modular charge based on CE/SE method[J]. Chinese Journal of Energetic Materials,2022,30(7):744-751. (in Chinese)

冯渊,王育维,朱文芳,等.基于CE/SE方法的某大口径火炮模块装药内弹道数值模拟[J].火炮发射与控制学报,2023, 44(6):51-59.

FENG Y,WANG Y W, ZHU W,et al. Numerical simulation on interior ballistic of a large caliber cannon with modular propellant charge based on CE/SE method[J]. Journal of Gun Launch &Control,2023,44(6):51-59. (in Chinese)

白桥栋,翁春生.二维CE/SE方法在内弹道湍流两相流动中的应用[J].兵工学报,2009,30(6):682-687.

BAI Q D,WENG C S. The application of two-dimensional space-time conservation element and solution element method (CE/SE) to turbulent two-phase flow in interior ballistics[J]. Acta Armamentarii,2009,30(6):682-687. (in Chinese)

HU C B, ZHANG X B. A Godunov type method determining boundary conditions to predict the transient heat transfer in an expanding combustion chamber[J]. International journal of numerical methods for heat & fluid flow,2019,29(12):4925-4947.

ACHARYA R,KUO K. Implementation of approximate Riemann solver to two-phase flows in mortar systems[J]. Journal of Applied Mechanics,2010,77(5):51401.

CHENG S S,TAO R Y,LU X G,et al. Efficient two-dimension particle element method of interior ballistic two-phase flow[J]. Combustion Theory and Modelling,2023,27(4):558-583.

NUSSBAUM J, HELLUY P, HÉRARD J M, et al. Numerical simulations of gas-particle flows with combustion[J]. Flow, Turbulence and Combustion,2006,76(4):403-417.

WOODLEY C R,BILLETT S,LOWE C,et al. The FHIBS internal ballistics code[C]∥Proceedings of the 22nd International Symposium on Ballistics. Vancouver,Canada:TIB,2005:322-329.

GOLLAN R,JOHNSTON I,FLAHERTY B,et al. Development of casbar:a two-phase flow code for the interior ballistics problem[C]∥Proceedings of the 16th Australasian Fluid Mechanics Conference. Crown Plaza, Gold Coast, Australia: CORE, 2007:295-302.

XUE T,ZHANG X B,TAMMA K K. Generalized heat conduction model involving imperfect thermal contact surface:Application of the GSSSS-1 differential-algebraic equation time integration[J]. International Journal of Heat and Mass Transfer,2018,116:889-896.

XIAO Y T, DING S K, ZHANG X B. A fluid-solid-thermal coupling method to obtain thermal effects of three-phase reactive flow in a growing combustion chamber[J]. International Communications in Heat and Mass Transfer,2024,159(Part A):108031.

王克,张领科,王戴思源.基于火炮膛内气固两相流的热散失模型数值仿真[J].弹道学报,2023,35(1):69-76.

WANG K,ZHANG L K,WANG D S Y. Numerical simulation of heat loss model based on gas-solid two-phase flows in a gun bore[J].Journal of Ballistics,2023,35(1):69-76. (in Chinese)

王颖泽,张小兵.移动质量作用下膨胀波发射装置的振动响应分析[J].航空动力学报,2009,24(8):1714-1719.

WANG Y Z,ZHANG X B. Vibration analysis of rarefaction wave launch device in moving/mass[J].Journal of Aerospace Power, 2009,24(8):1714-1719. (in Chinese)

王颖泽,张小兵,袁亚雄.基于膨胀波新发射机理的身管振动响应分析[J].振动与冲击,2009,28(8):144-147,205.

WANG Y Z, ZHANG X B, YUAN Y X. Vibration response analysis of the barrel based on new launch mechanism of rarefaction wave[J]. Journal of Vibration and Shock,2009, 28(8):144-147,205. (in Chinese)

ZHANG S J, RUI X T, YU H L,et al. Study on the coupling calculation method for the launch dynamics of a self-propelled artillery multibody system considering engraving process[J]. Defence Technology,2024,39:67-85.

包光辉,王国平,黎超,等.考虑火炮身管后坐的内弹道两相流数值仿真方法[J].兵工自动化,2020,39(12):80-85.

BAO G H,WANG G P,LI C,et al. Numerical simulation method of two-phase flow in interior ballistics considering recoil of artillery barrel[J]. Ordnance Industry Automation, 2020, 39(12):80-85. (in Chinese)

SHANMUGAMANI R, SADIQUE M, RAMAMOORTHY B. Detection and classification of surface defects of gun barrels using computer vision and machine learning[J]. Measurement, 2015,60:222-230.

MOOKIAH M R K, PUCH-SOLIS R, NIC DAEID N. Identification of bullets fired from air guns using machine and deep learning methods[J]. Forensic Science International, 2023,349:111734.

JAYASINGHE S C, MAHMOODIAN M, ALAVI A, et al. A review on the applications of artificial neural network techniques for accelerating finite element analysis in the civil engineering domain[J]. Computers & Structures,2025,310:107698.

LAN Z, FENG Y, LIU Y. Study of rectangular fin heat sink performance and prediction based on artificial neural network[J]. Case Studies in Thermal Engineering. 2024,64:105569.

MAGGIONI F,SPINELLI A. A novel robust optimization model for nonlinear Support Vector Machine[J]. European Journal of Operational Research. 2025,322(1):237-253.

SHI F, LIAO H, WANG S, et al. Optimization of drilling rate based on genetic algorithms and machine learning models[J]. Geo-energy Science and Engineering. 2025,247:213747.

张宁,史金光,王中原,等.基于支持向量回归模型的弹用冲压发动机性能预测及优化[J].兵工学报,2023,44(10):2944-2953.

ZHANG N,SHI J G,WANG Z Y,et al. Performance prediction and optimization of ramjet for projectiles using support vector regression model[J].Acta Armamentarii,2023,44(10):2944-2953. (in Chinese)

徐虎,冯金富.基于遗传算法的零维内弹道模型最大膛压的计算[J].航空计算技术,2006,(2):132-134.

XU H, FENG J F. Determination of internal ballistics zero-dimension model maxi-pressure point based on genetic algorithm[J].Aeronautical Computing Technique,2006,(2):132-134. (in Chinese)

梁光建,阎文,张磊,等.基于BP神经网络的内弹道主要诸元预测[J].四川兵工学报,2009,30(2):29-31.

LIANG G J, YAN W, ZHANG L, et al. Prediction of main interior ballistic parameters based on BP neural network[J]. Journal of Ordnance Equipment Engineering,2009,30(2):29-31. (in Chinese)

孔国杰,张培林,徐龙堂,等.一种新的火炮初速下降量预测模型[J].弹道学报,2009,21(3):65-68.

KONG G J,ZHANG P L,XU L T. A new prediction model of decreasing quantity of gun muzzle velocity[J]. Journal of Ballistics,2009,21(3):65-68. (in Chinese)

张小兵,袁亚雄,任如海,等.随机因素对火药激光点火过程影响的研究[J].兵工学报,2003,24(1):34-37.

ZHANG X B,YUAN Y X,REN R H, et al. Effects of random factors on the processes of laser ignition of propellants[J]. Acta Armamentarii,2003,24(1):34-37. (in Chinese)

陈丽艳,杨帆,王端.电磁轨道炮内弹道模拟及初速误差分析[J].火炮发射与控制学报,2018,39(3):17-21,26.

CHEN L Y, YANG F, WANG D. Research on the launching process of railgun in bore and error of muzzle velocity[J]. Journal of Gun Launch & Control,2018,39(3):17-21,26. (in Chinese)

林庆华,栗保明.高装填密度钝感发射装药的内弹道遗传算法优化[J].弹道学报,2008,(3):29-32.

LIN Q H, LI B M. Genetic algorithm optimization of interior ballistic design using high load density propellant[J]. Journal of Ballistics,2008,(3):29-32. (in Chinese)

肖剑,王雨时,张志彪.基于Pareto遗传算法的无后坐炮内弹道多目标优化设计[J].弹道学报,2019,31(3):53-57.

XIAO J,WANG Y S,ZHANG Z B. Multi-objective optimization design for interior ballistics of recoilless rifle based on pareto genetic algorithm[J]. Journal of Ballistics,2019,31(3):53-57. (in Chinese)

DUAN X C, ZHANG X B. A hybrid genetic-particle swarm optimizer using precise mutation strategy for computationally expensive problems[J]. Apply Intelligence 2022, 52: 8510-8533.

方峻,李林林,徐诚.基于神经网络和遗传算法的身管多目标优化[J].机械设计与制造,2013,(8):110-112,116.

FANG J, LI L L, XU C, et al. Multi-objective optimization of barrel based on neural networks and genetic algorithms[J]. Machinery Design & Manufacture,2013,(8):110-112,116. (in Chinese)

王渤,罗懿,薛涛,等.基于DENN的NSGA-Ⅱ算法的串联多药室火炮内弹道性能优化[J].弹道学报,2023,35(2):20-27.

WANG B,LUO Y,XUE T,et al. Optimization of interior ballistic performance of series multi-chamber gun via DENN-based NSGA-Ⅱ algorithm[J].Journal of Ballistics,2023,35(2):20-27. (in Chinese)

曹润铎.某小型机载制导弹药弹道优化设计及发射过程研究[D].南京：南京理工大学,2019.

CAO R D. Research on trajectory optimization design and launch process of a small airborne guided ammunition[D]. Nanjing:Nanjing University of Science and Technology, 2019. (in Chinese)

赵博文,余永刚,潘玉竹.随行装药退火算法的优化设计及数值模拟[J].火炸药学报,2010,33(5):75-78.

ZHAO B W, YU Y G, PAN Y Z. Numerical simulation and optimization design on annealing algorithm of traveling charge[J].Chinese Journal of Explosives & Propellants,2010,33(5):75-78. (in Chinese)

ZHANG B, WANG G, ZHAO X. Internal ballistic optimization design based on improved particle swarm optimization Title[C]∥Proceedings of the 2nd International Conference on Mechanical System Dynamics. Singapore:SNSPL,2024:2175-2183.

曹林,孟吉红,范匆,等.基于混合粒子群优化算法的火箭弹内弹道优化设计[J].弹道学报,2021,33(3):57-62.

CAO L,MENG J H,FAN C,et al. Interior ballistic optimization for uncontrolled rocket projectile based on hybrid particle swarm optimization algorithm[J]. Journal of Ballistics,2021,33(3):57-62. (in Chinese)

何新佳,马中亮,代淑兰.人工鱼群算法在高射炮内弹道性能优化中的应用[J].火力与指挥控制,2022,47(2):152-156,161.

HE X J,MA Z L,DAI S L. Application of artificial fish swarm algorithm in optimization of anti-aircraft gun interior ballistic performance[J]. Fire Control & Command Control,2022, 47(2):152-156,161. (in Chinese)

CHEN Z, MA H, XU Q, et al. Numerical simulation and optimized design of a launching system with a novel charge structure[J]. Propellants, Explosives, Pyrotechnics. 2024, 49(8):202300326.

WANG Y, MA Y, WANG R, et al. Design optimization and simulation of interior ballistic measurement technology based on parameters of large-caliber launch fuel[J]. Measurement. 2022, 189:110479.

贾轩,吴一帆,段浩,等.基于NSGA-II算法的燃气弹射内弹道参数优化建模[J].水下无人系统学报,2022,30(2):216-222.

JIA X,WU Y F,DUAN H,et al. Optimization modeling of gas catapult interior ballistic parameters based on NSGA-Ⅱalgorithm[J]. Journal of Unmanned Undersea Systems,2022, 30(2):216-222. (in Chinese)

刘林,樊成军,胡敬坤,等.混合装药内弹道仿真及多参数符合计算[J].火炮发射与控制学报,2014(1):48-51.

LIU L, FAN C J, HU J K, et al. Simulation and research on multi-parameter according calculation of mixed-charge interior ballistics[J]. Fire Control & Command Control,2014(1):48-51. (in Chinese)

张晓东,傅建平,张培林.基于改进遗传算法的内弹道多参数符合计算[J].弹道学报,2006,18(4):41-44.

ZHANG X D, FU J P, ZHANG P L. Research on multi-parameter according calculation of interior trajectory based on improved generic algorithm[J]. Journal of Ballistics, 2006, 18(4):41-44. (in Chinese)

贺磊,姚养无,李树军,等.基于改进粒子群算法的火炮内弹道多参数符合计算[J].火力与指挥控制,2021,46(11):165-169.

HE L, YAO Y W, LI S J, et al. Multi parameter coincidence calculation of gun interior ballistics based on improved particle swarm optimization algorithm[J]. Fire Control & Command Control,2021,46(11):165-169. (in Chinese)

张小兵,李湉湉.数据驱动在内弹道中的应用与展望[J].弹道学报,2025,37(1):1-8.

ZHANG X B,LI T T. Applications and prospects of data-driven methods in internal ballistics[J]. Journal of Ballistics,2025, 37(1):1-8. (in Chinese)

ZHANG X B, LI J F. Advancements and challenges of high-speed active flow control: plasma actuators[J]. International Journal of Heat and Mass Transfer,2025,252:127481.

ZHANG X B, WANG Z K. Thermal protection and drag reduction induced by flow control devices in supersonic/hypersonic flows:a review[J]. Progress in Aerospace Sciences, 2025,155:101093.