FORRESTAL M J , OKAJIMA K , LUK V K . Penetration of 6061-T651 aluminum targets with rigid long rods [J ] . Journal of Applied Mechanics , 1988 , 55 ( 4 ): 755 - 760 . DOI: 10.1115/1.3173718 http://doi.org/10.1115/1.3173718 https://asmedigitalcollection.asme.org/appliedmechanics/article/55/4/755/424214/Penetration-of-6061T651-Aluminum-Targets-With https://asmedigitalcollection.asme.org/appliedmechanics/article/55/4/755/424214/Penetration-of-6061T651-Aluminum-Targets-With We developed engineering models for forces on rigid, long rods with spherical, ogival, and conical noses that penetrated rate independent, elastic-perfectly plastic targets. The spherical and cylindrical, cavity-expansion approximations simplified the target analyses, so we obtained closed-form penetration equations. To verify our models, we performed terminal-ballistic experiments with 7.1-mm dia., 0.024 kg, marging steel rods and 152-mm dia., 6061-T651 aluminum targets. The models predicted penetration depths that were in reasonable agreement with the data for impact velocities between 0.4-1.4 km/s.

蒋志刚 , 曾首义 , 周建平 . 刚性尖头弹侵彻有限厚度金属靶板分析模型 [J ] . 兵工学报 , 2007 , 28 ( 8 ): 923 - 929 . 研究了刚性尖头弹以弹速或亚弹速垂直撞击有限厚度塑性金属靶板的侵彻问题。考虑靶板背表面自由边界的影响，建立并求解不可压缩弹塑性材料有限球形空腔膨胀模型，得到弹头表面径向压力的解析解。引入临界侵彻深度和临界撞击速度概念，提出一个两阶段侵彻模型。基于有限球形空腔膨胀模型，得到临界侵彻深度的解析解和弹体运动微分方程；用Runge- Kutta法求解微分方程，得到侵彻深度和临界撞击速度的数值解。与装甲钢靶板弹道试验数据比较，表明本文理论模型与试验吻合很好。

JIANG Z G , ZENG S Y , ZHOU J P . An analytical model for penetration into finite thickness metallic target struck by rigid sharp-nosed projectiles [J ] . Acta Armamentarii , 2007 , 28 ( 8 ): 923 - 929 . (in Chinese)

赵太勇 , 王维占 , 赵军强 , 等 . 12.7mm动能弹侵彻装甲钢板的结构响应特性研究 [J ] . 兵器装备工程学报 , 2020 , 41 ( 10 ): 146 - 149 .

ZHAO T Y , WANG W Z , ZHAO J Q , et al. Study on structural response characteristics of 12.7mm kinetic energy projectile penetrating armor plate [J ] . Journal of Ordnance Equipment Engineering , 2020 , 41 ( 10 ): 146 - 149 . (in Chinese)

王凯雷 , 李明净 , 董雷霆 . 12.7mm弹侵彻不同强度钢靶的数值模拟 [J ] . 爆炸与冲击 , 2022 , 42 ( 8 ): 108 - 120 .

WANG K L , LI M J , DONG L T . Simulation on penetration of a 12.7mm projectile into steel targets with different strengths [J ] . Explosion and Shock Waves , 2022 , 42 ( 8 ): 108 - 120 . (in Chinese)

ANDREW J P , KEVIN L P . Meeting the challenges of hypervelocity impact testing at 10km/s [J ] . International Journal of Impact Engineering , 2023 , 180 : 104665 . DOI: 10.1016/j.ijimpeng.2023.104665 http://doi.org/10.1016/j.ijimpeng.2023.104665 https://linkinghub.elsevier.com/retrieve/pii/S0734743X23001768 https://linkinghub.elsevier.com/retrieve/pii/S0734743X23001768

李德聪 , 陈力 , 丁雁生 . 装药弹体侵彻混凝土厚靶中的炸药摩擦起爆模型 [J ] . 爆炸与冲击 , 2009 , 29 ( 1 ): 13 - 17 .

LI D C , CHEN L , DING Y S . A model of explosion induced by friction in the process ofloaded projectiles penetrating into concrete targets [J ] . Explosion and Shock Waves , 2009 , 29 ( 1 ): 13 - 17 . (in Chinese)

张旭 , 曹仁义 , 谭多望 . 超音速侵彻混凝土过程中装药安定性结构设计的动摩擦理论分析 [J ] . 高压物理学报 , 2012 , 26 ( 1 ): 63 - 68 .

ZHANG X , CAO R Y , TAN D W . A dynamic friction analysis method of charge survivability during supersonic penetration of concrete targets [J ] . Chinese Journal of High Pressure Physics , 2012 , 26 ( 1 ): 63 - 68 . (in Chinese)

孙宝平 , 段卓平 , 皮爱国 , 等 . 弹体侵彻过程中装药温升的近似分析 [J ] . 爆炸与冲击 , 2012 , 32 ( 3 ): 225 - 230 .

SUN B P , DUAN Z P , PI A G , et al. Approximate analysis on temperature rise in charge explosive during projectile penetration [J ] . Explosion and Shock Waves , 2012 , 32 ( 3 ): 225 - 230 . (in Chinese) DOI: 10.1007/BF02097095 http://doi.org/10.1007/BF02097095 http://link.springer.com/10.1007/BF02097095 http://link.springer.com/10.1007/BF02097095

邵伟 , 范锦彪 , 耿宇飞 , 等 . 基于微元法的侵彻体弹头摩擦升温计算方法 [J ] . 探测与控制学报 , 2022 , 44 ( 2 ): 34 - 40 .

SHAO W , FAN J B , GENG Y F , et al. Penetrator warhead friction temperature rise calculation based on micro element method [J ] . Journal of Detection & Control , 2022 , 44 ( 2 ): 34 - 40 . (in Chinese)

赵奇 , 齐明思 , 丁爱国 , 等 . 弹丸侵彻装甲钢板温度场数值模拟研究 [J ] . 兵器材料科学与工程 , 2016 , 39 ( 1 ): 94 - 97 .

ZHAO Q , QI M S , DING A G , et al. Numerical simulation on temperature field of projectile penetrating armor steel plate [J ] . Ordnance Material Science and Engineering , 2016 , 39 ( 1 ): 94 - 97 . (in Chinese)

赵庚 , 陈智刚 , 李世纪 , 等 . 半穿甲战斗部侵彻过程中温升的数值模拟 [J ] . 兵器装备工程学报 , 2019 , 40 ( 2 ): 67 - 70 .

ZHAO G , CHEN Z G , LI S J , et al. Numerical simulation of temperature rise during penetration process of half armor piercing warhead [J ] . Journal of Ordnance Equipment Engineering , 2019 , 40 ( 2 ): 67 - 70 . (in Chinese)

GUO L , HE Y , ZHANG X F , et al. Thermal-mechanical analysis on the mass loss of high-speed projectiles penetrating concrete targets [J ] . European Journal of Mechanics A/Solids , 2017 , 65 : 159 - 177 DOI: 10.1016/j.euromechsol.2017.03.011 http://doi.org/10.1016/j.euromechsol.2017.03.011 https://linkinghub.elsevier.com/retrieve/pii/S0997753817302656 https://linkinghub.elsevier.com/retrieve/pii/S0997753817302656

DONG K , JIANG K , JIANG C L , et al. Study on mass erosion and surface temperature during high-speed penetration of concrete by projectile considering heat conduction and thermal softening [J ] . Materials , 2023 , 16 ( 3604 ): 3604 . DOI: 10.3390/ma16093604 http://doi.org/10.3390/ma16093604 https://www.mdpi.com/1996-1944/16/9/3604 https://www.mdpi.com/1996-1944/16/9/3604 The mass erosion of the kinetic energy of projectiles penetrating concrete targets at high speed is an important reason for the reduction in penetration efficiency. The heat generation and heat conduction in the projectile are important parts of the theoretical calculation of mass loss. In this paper, theoretical models are established to calculate the mass erosion and heat conduction of projectile noses, including models of cutting, melting, the heat conduction of flash temperature, and the conversion of plastic work into heat. The friction cutting model is modified considering the heat softening of metal, and a model of non-adiabatic processes for the nose was established based on the heat conduction theory to calculate the surface temperature. The coupling numerical calculation of the erosion and heat conduction of the projectile nose shows that melting erosion is the main factor of mass loss at high-speed penetration, and the mass erosion ratio of melting and cutting is related to the initial velocity. Critical velocity without melting erosion and a constant ratio of melting and cutting erosion exists, and the critical velocities are closely related to the melting temperature. In the process of penetration, the thickness of the heat affected zone (HAZ) gradually increases, and the entire heat conduction zone (EHZ) is about 5~6 times the thickness of the HAZ.

王梦茵 . SPH方法双金属爆炸焊接界面波数值模拟 [D ] . 大连 : 大连理工大学 , 2014 .

WANG M Y . The bimetal explosive welding interface wave numerical simulation by SPH method [D ] . Dalian : Dalian University of Technology , 2014 . (in Chinese)

徐林红 , 饶建华 . 金属材料及热处理 [M ] . 武汉 : 华中科技大学出版社 , 2019 .

XU L H , RAO J H . Metal materials and heat treatment [M ] . Wuhan : Huazhong University of Science and Technology Press , 2019 . (in Chinese)

田宪华 , 闫奎呈 , 赵军 , 等 . GH2132高温高应变率下力学性能分析与Johnson-Cook本构模型的建立 [J ] . 中国机械工程 , 2022 , 33 ( 7 ): 872 - 881 .

TIAN X H , YAN K C , ZHAO J , et al. Properties at elevated temperature and high strain rate and establishment of Johnson-Cook constitutive model for GH2132 [J ] . China Mechanical Engineering , 2022 , 33 ( 7 ): 872 - 881 . (in Chinese)

JOHNSON G R , COOK W H . A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures [J ] . Engineering Fracture Mechanics , 1983 , 21 .

陈刚 , 陈小伟 , 陈忠富 , 等 . A3钢钝头弹撞击45钢板破坏模式的数值分析 [J ] . 爆炸与冲击 , 2007 , 27 ( 5 ): 390 - 397 .

CHEN G , CHEN X W , CHEN Z F , et al. Simulations of A3 steel blunt projectiles impacting 45 steel plates [J ] . Explosion and Shock Waves , 2007 , 27 ( 5 ): 390 - 397 . (in Chinese)

VASU K R S , VINITH Y G , UDAY S G , et al. A review on Johnson Cook material model [J ] . Materials Today: Proceedings , 2022 , 62 : 3450 - 3456 . DOI: 10.1016/j.matpr.2022.04.279 http://doi.org/10.1016/j.matpr.2022.04.279 https://linkinghub.elsevier.com/retrieve/pii/S2214785322024191 https://linkinghub.elsevier.com/retrieve/pii/S2214785322024191

HALLQUIST J O . Ls-dyna keyword user's manual [Z ] . Livemore Software Technology Corporation , 2017 .