浏览全部资源
扫码关注微信
Path Analysis and Practical Exploration of Digital Twin Technology in Enabling Ammunition Production and Manufacturing
- Acta Armamentarii Vol. 46, Issue S2, Pages: 250763(2025)
- 作者机构：
中国五洲工程设计集团有限公司 北京 100053
- 作者简介：
- 基金信息：
DOI：10.12382/bgxb.2025.0763
CLC：Received：18 August 2025，
Online First：03 February 2026，
Published：2025
- 稿件说明：
移动端阅览
Mou SUN, Lirong SUN, Zhiwei MA, et al. Path Analysis and Practical Exploration of Digital Twin Technology in Enabling Ammunition Production and Manufacturing[J]. Acta Armamentarii, 2025, 46(S2): 250763.
Mou SUN, Lirong SUN, Zhiwei MA, et al. Path Analysis and Practical Exploration of Digital Twin Technology in Enabling Ammunition Production and Manufacturing[J]. Acta Armamentarii, 2025, 46(S2): 250763. DOI： 10.12382/bgxb.2025.0763.
摘要
随着全球科技竞争与国防需求持续升级
弹药生产制造正经历着以数字化智能化为核心的范式重构。数字孪生技术作为一种新兴的赋能手段
为弹药生产制造的转型升级提供了核心技术支撑。为此聚焦数字孪生技术赋能弹药生产制造的路径分析与实践探索
探讨该技术在制造模式转型中的关键作用
详细分析其在敏捷柔性制造、高性能低成本制造、制造装备健康管理、科研生产安全管控和生产工艺迭代优化方向的具体应用路径
结合典型应用案例进行实证分析
以数字孪生技术为线索提出针对弹药生产制造的制造模式转型发展建议。研究结果表明
通过在研发、生产、运维全流程应用数字孪生技术
可以有效提升弹药生产制造的敏捷性、安全性以及精益化水平
支撑弹药生产制造高性能、快响应、低成本目标的实现。研究成果对推动弹药生产制造领域的技术创新与发展具有重要意义。
Abstract
With the continuous intensification of global technological competition and defense demands
the field of ammunition production and manufacturing is undergoing a paradigm shift centered on digitalization and intelligence.Digital twin technology
as an emerging enabling tool
provides core technological support for the transformation and upgrading of ammunition production and manufacturing.Thus
this paper focuses on the path analysis and practical exploration of how the digital twin technology enables the ammunition production and manufacturing
investigateing its key role in the transformation of manufacturing modes.The specific application paths of digital twin technology in agile and flexible manufacturing
high-performance and low-cost manufacturing
manufacturing equipment health management
research and production safety control
and iterative optimization of production processes are analyzed in detail.Typical application cases are used for empirical analysis
and the development suggestions for the transformation of manufacturing modes in ammunition production and manufacturing are proposed based on the digital twin technology.The research result indicates that the agility
safety
and lean manufacturing levels of ammunition production and manufacturing can be effectively enhanced by applying the digital twin technology in the entire process of research and development
production and maintenance
thereby supporting the achievement of high-performance
fast-response and low-cost objectives in this field.The research results provide theoretical and practical references for promoting the intelligent transformation of ammunition production and manufacturing and enhancing the national defense industrial base.
关键词
Keywords
references
陈清霖 , 田鸿堂 . 基于能力需求的分布式武器装备关键技术研究 [J ] . 飞航导弹 , 2021 ( 3 ): 14 - 19 .
CHEN Q L , TIAN H T . Key technologies of distributed weapon equipment systems based on capability requirements [J ] . Flight Missiles , 2021 ( 3 ): 14 - 19 . (in Chinese)
王旭 , 潘幸华 , 窦从浩 , 等 . 精确打击武器成本控制研究 [J ] . 飞航导弹 , 2021 ( 6 ): 105 - 111 .
WANG X , PAN X H , DOU C H , et al. Research on cost control of precision strike weapons [J ] . Flight Missiles , 2021 ( 6 ): 105 - 111 . (in Chinese)
刘瑜 , 王鑫 , 燕志琴 . 装备高质量、高效益、低成本、可持续发展思路研究 [J ] . 航天工业管理 , 2023 ( 11 ): 23 - 27 .
LIU Y , WANG X , YAN Z Q . Research on development strategies for high-quality,high-efficiency,low-cost,and sustainable equipment [J ] . Aerospace Industry Management , 2023 ( 11 ): 23 - 27 . (in Chinese)
武逸凡 , 吴亚渝 , 陈仕勇 , 等 . 离散型特种制造业数字化转型建设路径探究 [J ] . 新技术新工艺 , 2024 ( 3 ): 1 - 8 .
WU Y F , WU Y Y , CHEN S Y , et al. Exploration of digital transformation construction path of discrete special industries [J ] . New Technology and New Process , 2024 ( 3 ): 1 - 8 . (in Chinese)
闫仲秋 , 陈义平 , 邵奇 , 等 . 基于数字工程的武器装备发展研究 [J ] . 兵工自动化 , 2023 , 42 ( 5 ): 92 - 96 .
YAN Z Q , CHEN Y P , SHAO Q , et al. Research on development of weapon equipment based on digital engineering [J ] . Ordnance Industry Automation , 2023 , 42 ( 5 ): 92 - 96 . (in Chinese)
张玉强 , 肖本帅 , 杨祥红 , 等 . 数智赋能的武器装备体系发展研究 [J ] . 指挥控制与仿真 , 2024 , 46 ( 3 ): 12 - 17 .
ZHANG Y Q , XIAO B S , YANG X H , et al. Research on development of weapon equipment system with digit & intelligence empowerment [J ] . Command Control and Simulation , 2024 , 46 ( 3 ): 12 - 17 . (in Chinese)
陶飞 , 刘蔚然 , 刘检华 , 等 . 数字孪生及其应用探索 [J ] . 计算机集成制造系统 , 2018 , 24 ( 1 ): 1 - 18 .
TAO F , LIU W R , LIU J H , et al. Digital twin and its potential application exploration [J ] . Computer Integrated Manufacturing Systems , 2018 , 24 ( 1 ): 1 - 18 . (in Chinese)
高丰 , 赵宁 , 庄存波 , 等 . 基于数字孪生的定制化士兵装备装箱生产过程优化方法 [J ] . 兵工学报 , 2025 , 46 ( 4 ): 369 - 383 .
GAO F , ZHAO N , ZHUANG C B , et al. Digital twin-driven customized individual equipment packing production optimization [J ] . Acta Armamentarii , 2025 , 46 ( 4 ): 369 - 383 . (in Chinese)
朱金达 , 陈佳辉 , 秦志英 , 等 . 基于虚拟现实与数字孪生技术的自行火炮辅助维修系统 [J ] . 数字印刷 , 2022 ( 6 ): 117 - 127 .
ZHU J D , CHEN J H , QIN Z Y , et al. Auxiliary maintenance system of self-propelled artillery based on virtual reality and digital twin technology [J ] . Digital Printing , 2022 ( 6 ): 117 - 127 . (in Chinese)
朱海华 , 付泰然 , 李霏 , 等 . 基于数字孪生的复杂产品装配物料过程齐套时间预测 [J ] . 机械工程学报 , 2025 , 61 ( 8 ): 384 - 398 .
ZHU H H , FU T R , LI F , et al. Prediction of process-level kitting time of assembly materials for complex products based on digital twin [J ] . Journal of Mechanical Engineering , 2025 , 61 ( 8 ): 384 - 398 . (in Chinese)
GRIEVES M , VICKERS J . Digital twin:mitigating unpredictable,undesirable emergent behavior in complex systems [M ] .Cham, Germany:Springer , 2016 : 85 - 113 .
陶飞 , 马昕 , 戚庆林 , 等 . 数字孪生连接交互理论与关键技术 [J ] . 计算机集成制造系统 , 2023 , 29 ( 1 ): 1 - 10 .
TAO F , MA X , QI Q L , et al. Theory and key technologies of digital twin connection and interaction [J ] . Computer Integrated Manufacturing Systems , 2023 , 29 ( 1 ): 1 - 10 . (in Chinese)
LIU Q , CHANG S , FENG G N , et al. Top displacement estimation for monopile-supported offshore wind turbine based on the combination of acceleration and inclination [J ] . Ocean Engineering , 2025 , 327 : 120954 .
CASADO P , TORRES C , BLANES J M , et al. Implementation of a 6U CubeSat electrical power system digital twin [J ] . Aerospace , 2024 , 11 ( 8 ): 688 .
CELIKMIH K , INAN O , UGUZ H . Failure prediction of aircraft equipment using machine learning with a hybrid data preparation method [J ] . Scientific Programming , 2020 , 2020 : 1 - 10 .
李晓红 . 美国国防领域数字孪生技术发展态势分析 [J ] . 军民两用技术与产品 , 2020 ( 12 ): 25 - 28 .
LI X H . Analysis of digital twin technology development trends in U.S.defense sector [J ] . Dual Use Technologies & Products , 2020 ( 12 ): 25 - 28 . (in Chinese)
姜元 , 李霖 , 史劼 , 等 . 基于信息物理系统的军工绿色智能制造研究综述 [J ] . 机电工程技术 , 2024 , 53 ( 9 ): 51 - 55 .
JIANG Y , LI L , SHI J , et al. Survey of military green intelligent manufacturing based on cyber-physics system [J ] . Mechanical & Electrical Engineering Technology , 2024 , 53 ( 9 ): 51 - 55 . (in Chinese)
FOURGEAU E , GOMEZ E , ADLI H , et al. System engineering workbench for multi-views systems methodology with 3D EXPERIENCE Platform [M ] //Complex Systems Design & #x00026; Management Asia.Berlin, Germany:Springer , 2016 .
陆清 , 吴双 , 赵喆 , 等 . 数字孪生技术在飞机设计验证中的应用 [J ] . 民用飞机设计与研究 , 2019 ( 3 ): 1 - 8 .
LU Q , WU S , ZHAO Z , et al. Application of digital twin technology in aircraft design verification [J ] . Civil Aircraft Design & Research , 2019 ( 3 ): 1 - 8 . (in Chinese)
刘瑜 , 谢强 . 数字孪生的技术特点及在飞行试验中的应用展望 [J ] . 系统仿真学报 , 2021 , 33 ( 6 ): 1364 - 1373 .
LIU Y , XIE Q . Technical characteristics of digital twins and application prospects in the field of flight testing [J ] . Journal of System Simulation , 2021 , 33 ( 6 ): 1364 - 1373 . (in Chinese)
宋琳 , 陈娇 . 兵器装备精益制造数字化技术发展趋势及工程化应用 [J ] . 兵工自动化 , 2013 , 32 ( 8 ): 28 - 31 .
SONG L , CHEN J . Development trend and engineering application of digital technology for lean manufacturing in weapon equipment [J ] . Ordnance Industry Automation , 2013 , 32 ( 8 ): 28 - 31 . (in Chinese)
刘娟 , 庄存波 , 刘检华 , 等 . 基于数字孪生的生产车间运行状态在线预测 [J ] . 计算机集成制造系统 , 2021 , 27 ( 2 ): 467 - 477 .
LIU J , ZHUANG C B , LIU J H , et al. Online prediction technology of workshop operating status based on digital twin [J ] . Computer Integrated Manufacturing Systems , 2021 , 27 ( 2 ): 467 - 477 . (in Chinese)
王昀睿 , 李妍 , 仁文哲 , 等 . 基于数字孪生的混流装配线资源配置优化 [J ] . 计算机集成制造系统 , 2021 , 27 ( 2 ): 536 - 544 .
WANG Y R , LI Y , REN W Z , et al. Digital twin-based resource allocation optimization method of mixed-model assembly line [J ] . Computer Integrated Manufacturing Systems , 2021 , 27 ( 2 ): 536 - 544 . (in Chinese)
刘亮 , 贺禹铭 , 祁思远 . 基于数字孪生仿真的柔性作业车间调度优化研究 [J ] . 现代制造工程 , 2025 ( 3 ): 41 - 51 .
LIU L , HE Y M , QI S Y . Optimization study of flexible job-shop scheduling based on digital twin simulation [J ] . Modern Manufacturing Engineering , 2025 ( 3 ): 41 - 51 . (in Chinese)
郭具涛 , 洪海波 , 钟珂珂 , 等 . 基于数字孪生的航天制造车间生产管控方法 [J ] . 中国机械工程 , 2020 , 31 ( 7 ): 808 - 814 .
GUO J T , HONG H B , ZHONG K K , et al. Production management and control method of aerospace manufacturing workshops based on digital twin [J ] . China Mechanical Engineering , 2020 , 31 ( 7 ): 808 - 814 . (in Chinese)
李家东 . 基于数字孪生的某航天车间生产线建模与仿真技术研究 [D ] . 南京 : 南京理工大学 , 2023 .
LI J D . Research on modeling and simulation technology of aerospace workshop production line based on digital twin [D ] . Nanjing : Nanjing University of Science and Technology , 2023 . (in Chinese)
雷林 , 伍凌川 , 张博 , 等 . 国外战斗部装药生产装备现状及发展趋势 [J ] . 兵工自动化 , 2015 , 34 ( 8 ): 32 - 36 .
LEI L , WU L C , ZHANG B , et al. Current situation and development trend of charging equipment for warhead in abroad [J ] . Ordnance Industry Automation , 2015 , 34 ( 8 ): 32 - 36 . (in Chinese)
孙宜亮 . 弹药生产技术和装备发展现状及发展对策初探 [J ] . 科技创新与应用 , 2018 ( 32 ): 155 - 156 .
SUN Y L . Preliminary study on development status and countermeasures of ammunition production technology and equipment [J ] . Technology Innovation and Application , 2018 ( 32 ): 155 - 156 . (in Chinese)
胡晓东 . 弹药制造特点与智能制造发展思考 [C ] // 中国兵工学会,重庆市科学技术协会.OSEC首届兵器工程大会论文集 . 重庆 : 重庆红宇精密工业有限责任公司 , 2017 : 295 - 297 .
HU X D . Characteristics of ammunition manufacturing and development of intelligent manufacturing [C ] // Proceedings of China Ordnance Society,Chongqing Association for Science and Technology.Proceedings of the First OSEC Conference on Ordnance Engineering . Chongqing : Chongqing Hongyu Precision Industry Co. ,Ltd., 2017 : 295 - 297 . (in Chinese)
TAO F , ZHANG M , LIU Y S , et al. Digital twin driven prognostics and health management for complex equipment [J ] . CIRP Annals , 2018 , 67 ( 1 ): 169 - 172 .
洪东跑 , 方伟光 , 李浩 , 等 . 面向智能运维的装备数字孪生体构建与应用研究 [J ] . 宇航学报 , 2024 , 45 ( 6 ): 854 - 865 .
HONG D P , FANG W G , LI H , et al. Research on construction and application of weaponry digital twin for intelligent operation and maintenance [J ] . Journal of Astronautics , 2024 , 45 ( 6 ): 854 - 865 . (in Chinese)
陶飞 , 张贺 , 戚庆林 , 等 . 数字孪生模型构建理论及应用 [J ] . 计算机集成制造系统 , 2021 , 27 ( 1 ): 1 - 15 .
TAO F , ZHANG H , QI Q L , et al. Theory of digital twin modeling and its application [J ] . Computer Integrated Manufacturing Systems , 2021 , 27 ( 1 ): 1 - 15 . (in Chinese)
0
Views
0
下载量
0
CNKI被引量
- L-PDFDownload
- Meta-XMLDownload
- BibTeXDownload
- EndnoteDownload
- RefMan Download
- NoteExpressDownload
- NoteFirstDownload
Publicity Resources
Related Articles
Related Author
Related Institution
- Postal code：100089
- Tel：010-68963060/68962718 Fax：010-68963025 Email：bgxb@cos.org.cn
- Technical support is provided by Beijing Founder electronics co., LTD 京ICP备05059581号-4
京公网安备11010802024360号 - It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
- Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
- Total Visits：49231 Visits Today：28