ZHAO Shengwei, ZHOU Gang, WANG Kehui, et al. Study on the Shock Compressive Properties of Metal Foam Materials at High Strain Rates[J]. Acta Armamentarii, 2026, 47(5): 250664.
DOI:
ZHAO Shengwei, ZHOU Gang, WANG Kehui, et al. Study on the Shock Compressive Properties of Metal Foam Materials at High Strain Rates[J]. Acta Armamentarii, 2026, 47(5): 250664.DOI: 10.12382/bgxb.2025.0664.
Study on the Shock Compressive Properties of Metal Foam Materials at High Strain Rates
The compressive behaviors and impact attenuation characteristics of aluminum foam and aluminum foam-polyurethane composite materials under different strain rates are investigated through quasi-static compression test and light gas gun planar impact experiment. In the quasi-static compression test,the influences of porosity,pore size,and strain rate on the material performance are systematically analyzed. The result shows that the porosity and pore size have a significant impact on the plateau stress and energy absorption capacity of the material. In the high strain rate plate impact experiment,the impact attenuation characteristics of aluminum foam and aluminum foam-polyurethane composite materials is investigated. The result shows the both the materials effectively attenuate the stress amplitude and velocity of shockwave,and perform even better in terms of stress amplitude attenuation. The strain rate and stress-strain relation of the materials are analyzed by using Lagrangian analysis method,and the dynamic response mechanisms is revealed under impact load. The research results provide theoretical foundation for the application of foam metal materials,particularly about the compressive behavior and impact attenuation characteristics at high strain rate.
关键词
Keywords
references
RAJAK D K, KUMARASWAMIDHAS L A, DAS S. An energy absorption behaviour of foam filled structures [J]. Procedia Materials Science, 2014, 5: 164-172.
LIZB,LIXY. Size effects and compression properties of metallic foams with lateral constraint[J]. Rare Metal Materials and Engineering, 2020, 49(9): 3203-3208. (in Chinese)
ZHANG Y, JIN T, LI S Q, et al. Yield behavior of aluminum foam under multi-axial loading [J]. Mechanics of Materials, 2024, 196: 105069.
XIAO Y C, LIU H M, DONG X Y, et al. Effect of cell diameter variations on the mechanical behavior of aluminum foams:experiments and modeling[J]. Materials Today Communications, 2024, 39: 109090.
WANG Z, HONG B, XIAN G J, et al. Quasi-static and low-velocity impact behaviors of steel-aluminum foam sandwich beams [J]. Structures, 2024, 64: 106549.
WEI J H, LI X, HUANG W, et al. Dynamic response and failure of sandwich beams with graded metal foam core under high-velocity impact[J]. Explosion and Shock Waves, 2023, 43(5):053301.(in Chinese)
SU X Y, JING L, ZHAO L M. Failure modes and shock resistance of sandwich panels with layered-gradient aluminum foam cores under air-blast loading[J]. Explosion and Shock Waves, 2019, 39(6): 063103.(in Chinese)
GUO KL,MUMY,ZHUL, et al. Analysis on plastic responses of metal foam sandwich beams under low velocity repeated impacts [J]. Journal of Ship Mechanics, 2023, 27(12): 1812 -1826. (in Chinese)
FOWLES R. Conservation relations for spherical and cylindrical stress waves [J]. Journal of Applied Physics, 1970, 41 (6 ):2740-2741.
GRADY D E. Experimental analysis of spherical wave propagation [J]. Journal of Geophysical Research, 1973, 78(8): 1299-1307.
LIN Y R, WANG ZJ,LIY L, et al. Constitutive relation using particle velocity data of spherical waves [J]. Journal of PLA University of Science and Technology(Natural Science Edition), 2007, 8(6): 606-610.(in Chinese)
WANG L L, ZHU J, LAI H W. Understanding and interpreting of the measured wave signals in impact dynamics studies[J]. Chinese Journal of High Pressure Physics, 2010, 24(4): 279-285.(in Chinese)
MILTZ J, GRUENBAUM G. Evaluation of cushioning properties of plastic foams from compressive measurements [J]. Polymer Engineering & Science, 1981, 21(15): 1010-1014.
.TAO W J, HUAN S. Study on Lagrangian analysis for solving the stress gradually along the time[J]. Acta Physica Sinica, 2012, 61(20): 200703.(in Chinese)
TAO W J, HUAN S, JIANG G P. Lagrangian analysis method based on least square [J]. Journal of Vibration and Shock, 2012, 31(21): 97-101, 142.(in Chinese)
荣誉. 梯度泡沫金属力学性能的Lagrangian分析[D]. 太原:太原理工大学, 2018.
RONG Y. Lagrangian analysis for the mechanical properties of graded metallic foams [D]. Taiyuan: Taiyuan University of Technology, 2018. (in Chinese)
魏恒. 泡沫金属材料冲击特性的路径线法研究[D]. 太原:太原理工大学, 2016.
WEI H. Study on the dynamic behavior of foam metals based on path line method [D]. Taiyuan: Taiyuan University of Technology, 2016. (in Chinese)
YANG C X, CHEN Z F, YAO S G, et al. Quasi-static and low-velocity axial crushing of polyurethane foam-filled aluminium/CFRP composite tubes: an experimental study [J]. Composite Structures, 2022, 299: 116083.
何兴伟. 陶瓷/纤维/泡沫铝复合板抗侵彻性能研究[D]. 哈尔滨:哈尔滨工程大学, 2020.
HE X W. Study on the penetration resistance of ceramic/fiber/foam aluminum composite panel [D]. Harbin: Harbin Engineering University, 2020.(in Chinese)
HE K J. Research on mechanical behaviors of aluminum foam/polyurethane composite dampers and their application in seismic energy dissipation[D]. Nanjing: Southeast University, 2020.(in Chinese)
BAO H Y. Study on mechanical behaviors of aluminum foam-polymer composites and their composite steel tube components [D]. Nanjing: Southeast University, 2021.(in Chinese)