Numerical Simulation Study on the Influence of the Rotation Speed of Vertical Kneader and the Viscosity of Slurry on the Kneading Characteristics of PBX Explosives
|更新时间:2026-04-24
|
Numerical Simulation Study on the Influence of the Rotation Speed of Vertical Kneader and the Viscosity of Slurry on the Kneading Characteristics of PBX Explosives
CHEN Yanyu, HU Zixian, JIANG Wang, et al. Numerical Simulation Study on the Influence of the Rotation Speed of Vertical Kneader and the Viscosity of Slurry on the Kneading Characteristics of PBX Explosives[J]. Acta Armamentarii, 2026, 47(3): 250341.
DOI:
CHEN Yanyu, HU Zixian, JIANG Wang, et al. Numerical Simulation Study on the Influence of the Rotation Speed of Vertical Kneader and the Viscosity of Slurry on the Kneading Characteristics of PBX Explosives[J]. Acta Armamentarii, 2026, 47(3): 250341.DOI: 10.12382/bgxb.2025.0341.
Numerical Simulation Study on the Influence of the Rotation Speed of Vertical Kneader and the Viscosity of Slurry on the Kneading Characteristics of PBX Explosives
investigate the mechanism of action of key parameters such as spindle speed
blade speed
and slurry viscosity in a dual-blade vertical kneader on the kneading process of polymer bonded explosive(PBX)slurry and analyze the influence laws of each parameter on slurry temperature
flow rate
and maximum spindle torquehe mixing and stirring process of slurry in the dual-blade vertical kneader based on the transition-SST model and the non-Newtonian fluid rheological model of the slurry. Through structural definition
mesh division verification
and dynamic parameter setting in numerical simulation software
the setting of boundary conditions according to experimental working conditions
and the calibration of simulation parameters based on the experimental data of spindle output torque. Experiment verification shows that the calculation error of kneading torque is only 5.2%
indicating that this numerical simulation method has high reliability. the influence laws of different parameters(spindle speed
hollow blade speed
solid blade speed
and material viscosity)on the maximum slurry temperature
minimum flow rate
and maximum spindle torque during the mixing process studied. The simulat results show that within the given parameter range
the spindle speed and solid blade speed have no effect on the maximum temperature of the slurry
and the contribution of hollow blade speed and slurry viscosity to the maximum slurry temperature are 55.5% and 44.5% respectively. Moreover
the hollow blade speed
solid blade speed
and material viscosity have no effect on the minimum flow rate of the slurry
while the revolution speed is the only significant factor affecting the minimum flow rate of slurry in the kneader. Furthermore
the hollow blade speed and solid blade speed have no effect on the maximum output torque of spindle
and the contribution of the slurry viscosity and spindle speed to the maximum output torque of spindle are 62% and 38% respectively.
LI Y X, MO J A, WANG X Y, et al. Research progress on composite materials for solid rocket motor casing[J]. Aerospace Manufacturing Technology,2020(4):65-69. (in Chinese)
HE D P,WEN T,YOU G Q,et al. Research progress in numerical simulation of molding of polymer bonded explosives[J]. Ordnance Industry Automation,2024,43(8):71-79. (in Chinese)
WEI Y M,XU W Z,GUO F W,et al. Experimental and numerical simulation investigation on dynamic fracture behavior of polymer bonded explosives under different high- g impact conditions[J ] . International Journal of Impact Engineering,2023,181:104735.
张峰峰.浇注PBX炸药物料混合及固化工艺数值模拟与安全评估[D].太原:中北大学,2020.
ZHANG F F. Numerical simulation and safety assessment of mixing and curing processes of castable PBX explosive materials[D]. Taiyuan:North University of China,2020. (in Chinese)
YANG K,WU Y Q,HUANG F L. Crack nucleation and growth induced by thermal phase transition for polymer bonded energetic composite materials[J]. Composite Structures,2023,319:117211.
ZHU Y M, LYU D, HU R Z, et al. Parameter control and engineering optimization of continuous mixing process of solid propellant[J]. Journal of Solid Rocket Technology,2020,43(6):776-781. (in Chinese)
WU Y H, WEI H J, FU X L. Research advances in rheological properties and process simulation of solid propellants[J]. Initiators& Pyrotechnics,2024(2):58-64. (in Chinese)
WANG Z H,CUI Q Z,HUANG Q A,et al. Numerical simulation of PBX explosive mixing based on fluent[J]. Ordnance Industry Automation,2023,42(2):83-86. (in Chinese)
LIANG J,YANG H,WEI J,et al. CFD simulation study on torque characteristics of blade in vertical kneader[J]. Journal of Solid Rocket Technology,2018,41(1):78-83. (in Chinese)
HU M L,WU Y,WANG X Y,et al. Numerical simulation of the dynamic mixing process of HTPB/Al/AP/RDX solid propellants[J].Acta Armamentarii,2025,46(7):240611. (in Chinese)
LONG J C,HE Y,ZHAN X B,et al. Study of kneading pressure and power consumption in a twin-blade planetary mixer for mixing highly viscous fluids[J]. Chemical Engineering Science,2021, 241:116723.
QI L Y,ZHANG H S,GAO Z H,et al. Safety analysis of kneading process of energetic materials based on automated production[J]. Ordnance Industry Automation, 2024, 43 (1): 30 - 34. (in Chinese)
YANG L S, ZHANG X M. Influence of the structure of a horizontal single-shaft kneading reactor on the fluid flow and mixing characteristics[J]. Journal of Zhejiang Sci-Tech University (Natural Sciences Edition), 2024, 51 (2): 161 - 173. (in Chinese)
JIANG A M, YU S C, ZOU C Q. Numerical simulation of propellant slurry mixing process in mixing kettle of vertical kneader[J]. Journal of Naval Aeronautical Engineering Institute, 2011,26(4):381-386. (in Chinese)
LIANG J,LI X W,ZHAN X B,et al. Numerical analysis on effects of geometrical parameters of vertical planetary kneading mixer blades on the characteristics of torque and power[J]. Journal of Solid Rocket Technology,2016,39(6):789-796. (in Chinese)
GAGGERO S. Influence of the transition from laminar to turbulent flow in oblique unsteady flow on the performance and pressure pulsations of model-scale propellers[J]. Journal of Marine Science and Application,2023,22:199-218.
BARROUILLET B, LAURENDEAU É, YANG H. Calibration of the transitional k - ω - γ - Re θt turbulence model[J ] . AIAA Journal, 2022,60(7):4140-4148.
LIU M N,XU L Y, ZHOU Z L. Design of a load torque based control strategy for improving electric tractor motor energy conversion efficiency[J]. Mathematical Problems in Engineering, 2016(1):2548967.
ZHU Q,CHEN S L,WANG Y,et al. Application of a horizontal multi-chamber continuous kneading equipment[J]. Ordnance Industry Automation,2023,42(11):28-29,48. (in Chinese)
YU X,WANG D P,CHEN Z,et al. Experimental investigation on rheological behavior of dry granular mixtures based on direct measurement of basal friction[J]. Powder Technology, 2024, 438:119674.
YAO X L, LU Y, TANG D L. Simulation influence of blade structure parameters on the mixing process of a double planetary stirrer[J]. Chemical Engineering,2024,52 (7):57-63. (in Chinese)
安澍.卧式双轴捏合反应器成膜特性及混合特性CFD模拟研究[D].杭州:浙江大学,2023.
AN S. CFD simulation of film formation and mixing characteristics in a horizontal twin-shaft kneading reactor[D]. Hangzhou:Zhejiang University,2023. (in Chinese)
GU F L,QIAO Q,YU J X,et al. Effects of mechanical interactions on friction-induced subsurface densification of borosilicate glass[J]. Journal of Non-Crystalline Solids,2021,572:121088.
YEH C H. The selection of multiattribute decision making methods for scholarship student selection[J]. International Journal of Selection and Assessment,2003,11(4):289-296.