王晓峰,郝仲璋.炸药发展中的新技术[J].火炸药学报,2002, 25(4):35-38.

WANG X F,HAO Z Z. New development of explosives technology[J]. Journal of Explosives & Explosives,2002,25(4):35-38. (in Chinese)

梁力,季洁,杨雪芹,等.高固含量改性双基推进剂模拟料连续剪切压延工艺与性能研究[J].火炸药学报,2021,44(3):328-335.

LIANG L,JI J,YANG X Q,et al. Research on continuous shear calendering process and performance of modified double-base propellant substitute materials with high solid content[J]. Journal of Explosives & Explosives,2021,44(3):328-335. (in Chinese)

胡木林,武毅,王行远,等. HTPB/Al/AP/RDX固体推进剂动态混合过程数值仿真[J].兵工学报,2024,45(1):1-17.

HU M L,WU Y,WANG X Y,et al. Numerical simulation of the dynamic mixing process of HTPB/Al/AP/RDX solid propellant[J].Acta Armamentarii,2024,45(1):1-17. (in Chinese)

AUSTIN R,BARTON N R,REAUGH J E,et al. Direct numerical simulation of shear localization and decomposition reactions in shock-loaded HMX crystal[J]. Journal of Applied Physics,2015, 117(18):185902.

钟凯,刘建,王林元,等.含能材料中“热点”的理论模拟研究进展[J].含能材料,2018,26(1):11-20.

ZHONG K, LIU J, WANG L Y, et al. Lssue of ‘Hot-Spot' in energetic materials:recent progresses of modeling and calculations[J]. Chinese Journal of Energetic Materials,2018,26(1):11-20. (in Chinese)

FIELD J E,BOURNE N K,PALMER S J P,et al. Hot-spot ignition mechanisms for explosives and propellants[J]. Philosophical Transactions of the Royal Society of London. Series A:Physical and Engineering Sciences,1992,339:269-283.

WATKINS S,LEE R,HEWITT A,et al. An Investigation into the Surface Skidding Response of PBX 9501 and PBX 9502[J]. Propellants,Explosives,Pyrotechnics,2022,47:e202200010.

DUAN H Z,WU Y Q,YANG K, et al. Numerical simulation of drop weight impact sensitivity evaluation criteria for pressed PBXs[J]. Defence Technology,2023,19(1):76-90.

YUAN J M,QIN Y,PENG H Z,et al. Experiment and numerical simulation on friction ignition response of HMX-based cast PBX explosive[J]. Crystals,2023,13(4):671.

YANG K,DONG L Y,WU Y Q. Viscous shear flow and heating of impact-extruded composite energetic materials[J]. International Journal of Mechanical Sciences,2023,258:108588.

ROLAND W, MARSCHIK C, KRIEGER M, et al. Symbolic regression models for predicting viscous dissipation of three-dimensional non-Newtonian flows in single-screw extruders[J]. Journal of Non-Newtonian Fluid Mechanics,2019,268:12-29.

LIN G M,ZONG H Z,WANG S W,et al. Investigation of mixing performance and safety characteristics of polymer-based energetic materials simulant via screw-pressing blending extrusion charges[J]. Defence Technology,2025,44:287-305.

BU Y F,CHEN C Y,JIANG F,et al. Experimental and numerical analysis of single screw extrusion process for thermoplastic PBX based on PVT properties[J]. Propellants,Explosives,Pyrotechnics, 2022,47(11):e202200093.

李敏,薛平,王江宁,等.典型含能材料单螺杆压伸过程模拟分析[J].固体火箭技术,2020,43(5):594-601.

LI M,XUE P,WANG J N,et al. Simulation analysis for single-screw extrusion process of typical energetic material[J]. Journal of Solid Rocket Technology, 2020, 43 (5): 594 - 601. (in Chinese)

YUAN J M,LIU Y,WANG J Y,et al. Non-isothermal simulation and safety analysis of twin-screw extrusion process for synthetizing glycidyl azide polymer-based energetic thermoplastic elastomer[J]. Polymers,2023,15(18):3662.

SWEENEY M A,BRATTON K R,WOODRUFF C,et al. Effects of shear rate during energetic material processing on reactivity[J]. Advanced Engineering Materials,2019,21(5):1801324.

BILYK N A,MIKHAILOV A L,KHANIN V P,et al. Effect of the shear area on the probability of an explosion of high explosives under shock-induced shear[J]. Combustion Explosion & Shock Waves,2013,49(3):348-352.

LIU R,CHEN P W,ZHANG X T,et al. Non - shock ignition probability of octahydro-1, 3, 5, 7-tetranitro-tetrazocine-based polymer bonded explosives based on microcrack stochastic distribution[J]. Propellants, Explosives, Pyrotechnics, 2020, 45(4):568-580.

WU C W,MA G J,JIANG L F. Role of pressure-dependent wall slip in the generation of hydrodynamic pressure in a sliding gap[J]. Chinese Journal of Computational Mechanics,2007,24(6):811-816.

FANG W J,FANG M W,WANG M H,et al. Molecular simulation study on effect of pressure and shear velocity on fluid slip[J]. Journal of Qingdao University (Natural Science Edition),2015, 28(4):24-27.

梁建,杨红,魏佳,等.立式捏合机桨叶扭矩特性的CFD仿真研究[J].固体火箭技术,2018,41(1):78-83.

LIANG J, YANG H, WEI J, et al. CFD analysis on the characteristics of blades' torque of the twin-blade planetary mixer[J].Journal of Solid Rocket Technology,2018,41(1):78-83. (in Chinese)

景玲.立式捏合机搅拌桨叶应力与温度数值分析研究[D].西安：西安工业大学,2013.

JING L. Kneadermixer paddle stress and temperature numerical analysis[D]. Xi'an:Xi'an Technological University,2013. (in Chinese)

高文江. HMX基高固相PBX挤注装药安全性研究[D].太原：中北大学,2024.

GAO W J. Study on the safety of HMX-based high solid phase PBX extrusion charge[D]. Taiyuan:North University of China, 2024. (in Chinese)

岳相丞,石艳,廖映华,等.大叶片搅拌器在EVOH聚合釜中的数值模拟[J].科学技术与工程,2023,23(27):11739-11746.

YUE X C,SHI Y,LIAO Y H,et al. Numerical simulation of large-blade agitator in EVOH polymerization reactor[J]. Science Technology and Engineering,2023,23(27):11739-11746. (in Chinese)

刘鹏飞.搅拌器内流特性的数值模拟及叶轮优化分析[D].合肥：安徽农业大学,2024.

LIU P F. Numerical simulation of internal flow characteristics of agitator and optimization analysis of impeller[D]. Hefei:Anhui Agricultural University,2024. (in Chinese)

张峰峰.浇注PBX炸药物料混合及固化工艺数值模拟与安全评估[D].太原：中北大学,2020.

ZHANG F F. Numerical simulation and safety assessment of mixing and curing process of cast-cured PBX explosives[D]. Taiyuan:North University of China,2020. (in Chinese)

丁治豪,杨伟涛,高宇晨,等.喷头流道结构参数对高黏度含能材料直写成型3D打印挤出过程稳定性影响[J].含能材料,2024,32(4):377-386.

DING Z H, YANG W T, GAO Y C, et al. Influence of nozzle structure parameters on the stability of DIW 3D printing extrusion process[J]. Chinese Journal of Energetic Materials, 2024, 32(4):377-386. (in Chinese)

张丹丹.发射药挤出成型过程的数值模拟研究[D].南京：南京理工大学,2015.

ZHANG D D. Study of the extrusion simulation of propellant[D]. Nanjing:Nanjing University of Science and Technology,2015. (in Chinese)