DOUGLASS H W , COLLINS J H , NOEL J S , et al . Solid propellant grain structural integrity analysis:NASA SP-8073 [J ] . Washington, DC , US:NASA Space Vehicle Design Criteria (Chemical Propulsion) , 1973 .

ZHOU D M , LIU X Y , SUI X , et al . Accelerated aging and structural integrity analysis approach to predict the service life of solid rocket motor [C ] //Proceedings of the 51st AIAA/SAE/ASEE Joint Propulsion Conference.Orlando,FL, US:AIAA , 2015 : 4240 .

DENG B , TANG G J , SHEN Z B . Structural analysis of solid rocket motor grain with aging and damage effects [J ] . Journal of Spacecraft and Rockets , 2015 , 52 ( 2 ): 331 - 339 . DOI: 10.2514/1.A32843 http://doi.org/10.2514/1.A32843 https://arc.aiaa.org/doi/10.2514/1.A32843 https://arc.aiaa.org/doi/10.2514/1.A32843

WANG Z J , QIANG H F , WANG T J , et al . A thermovisco-hyperelastic constitutive model of HTPB propellant with damage at intermediate strain rates [J ] . Mechanics of Time-Dependent Materials , 2018 , 22 ( 3 ): 291 - 314 . DOI: 10.1007/s11043-017-9357-9 http://doi.org/10.1007/s11043-017-9357-9

CHYUAN S W . Dynamic analysis of solid propellant grains subjected to ignition pressurization loading [J ] . Journal of Sound and Vibration , 2003 , 268 ( 3 ): 465 - 483 . DOI: 10.1016/S0022-460X(02)01554-7 http://doi.org/10.1016/S0022-460X(02)01554-7 https://linkinghub.elsevier.com/retrieve/pii/S0022460X02015547 https://linkinghub.elsevier.com/retrieve/pii/S0022460X02015547

王佳奇 , 贺绍飞 , 申志彬 , 等 . 低温点火条件下药柱结构完整性分析与试验 [J ] . 固体火箭技术 , 2019 , 42 ( 3 ): 356 - 360 .

WANG J Q , HE S F , SHEN Z B , et al . Analysis and experiment on grain structural integrity under low temperature ignition [J ] . Journal of Sound and Vibration , 2019 , 42 ( 3 ): 356 - 360 . (in Chinese)

WANG C G , TIAN W P . The influence factors of grain integrity under the internal pressure condition in SRM [J ] . International Journal of Aerospace Engineering , 2021 , 2021 : 5521455 .

王哲君 , 强洪夫 , 王广 , 等 . 固体推进剂力学性能和本构模型的研究进展 [J ] . 含能材料 , 2016 , 24 ( 4 ): 403 - 416 .

WANG Z J , QIANG H F , WANG G , et al . Review on the mechanical properties and constitutive models of solid propellants [J ] . Chinese Journal of Energetic Materials , 2016 , 24 ( 4 ): 403 - 416 . (in Chinese)

SCHAPERY R A . Analysis of damage growth in particulate composites using a work potential [J ] . Composites Engineering , 1991 , 1 ( 3 ): 167 - 182 . DOI: 10.1016/0961-9526(91)90017-M http://doi.org/10.1016/0961-9526(91)90017-M https://linkinghub.elsevier.com/retrieve/pii/096195269190017M https://linkinghub.elsevier.com/retrieve/pii/096195269190017M

SCHAPERY R A . Nonlinear viscoelastic and viscoplastic constitutive equations with growing damage [J ] . International Journal of Fracture , 1999 , 97 ( 1 ): 33 - 66 . DOI: 10.1023/A:1018695329398 http://doi.org/10.1023/A:1018695329398 http://link.springer.com/10.1023/A:1018695329398 http://link.springer.com/10.1023/A:1018695329398

张建彬 . 双基推进剂屈服准则及粘弹塑性本构模型研究 [D ] . 南京 : 南京理工大学 , 2013 .

ZHANG J B . Study on yield criteria and visco-elastoplastic constitutive model of the double-base propellant [D ] . Nanjing : Nanjing University of Science and Technology , 2013 . (in Chinese)

XU J S , CHEN X , WANG H L , et al . Thermo-damage-viscoelastic constitutive model of HTPB composite propellant [J ] . International Journal of Solids and Structures , 2014 , 51 ( 18 ): 3209 - 3217 . DOI: 10.1016/j.ijsolstr.2014.05.024 http://doi.org/10.1016/j.ijsolstr.2014.05.024 https://linkinghub.elsevier.com/retrieve/pii/S0020768314002182 https://linkinghub.elsevier.com/retrieve/pii/S0020768314002182

XU J S , HAN L , ZHENG J , et al . Finite element implementation of a thermo-damage-viscoelastic constitutive model for hydroxyl-terminated polybutadiene composite propellant [J ] . Mechanics of Time-Dependent Materials , 2017 , 21 ( 4 ): 577 - 595 . DOI: 10.1007/s11043-017-9343-2 http://doi.org/10.1007/s11043-017-9343-2 http://link.springer.com/10.1007/s11043-017-9343-2 http://link.springer.com/10.1007/s11043-017-9343-2

MA H , SHEN Z B , LI D K . A viscoelastic constitutive model of composite propellant considering dewetting and strain‐rate and its implementation [J ] . Propellants, Explosives, Pyrotechnics , 2019 , 44 ( 6 ): 759 - 768 . DOI: 10.1002/prep.v44.6 http://doi.org/10.1002/prep.v44.6 https://onlinelibrary.wiley.com/toc/15214087/44/6 https://onlinelibrary.wiley.com/toc/15214087/44/6

ZHANG J F , ZHENG J , CHEN X , et al . A thermovisco-hyperelastic constitutive model of NEPE propellant over a large range of strain rates [J ] . Journal of Engineering Materials and Technology , 2014 , 136 ( 3 ): 031002 . DOI: 10.1115/1.4027291 http://doi.org/10.1115/1.4027291 https://asmedigitalcollection.asme.org/materialstechnology/article/doi/10.1115/1.4027291/372140/A-ThermoviscoHyperelastic-Constitutive-Model-of https://asmedigitalcollection.asme.org/materialstechnology/article/doi/10.1115/1.4027291/372140/A-ThermoviscoHyperelastic-Constitutive-Model-of The uniaxial compressive mechanical curves of nitrate ester plasticized polyether (NEPE) propellant under different temperatures and strain rates have been obtained with a universal testing machine and modified split Hopkinson pressure bar (SHPB). The experimental results show that the mechanical properties of NEPE propellant are both rate dependent and temperature dependent. With decreasing temperature or increasing strain rate, the modulus and rigidity obviously increase. Based on the previous models proposed by Yang and Pouriayevali, we propose a modified viscohyperelastic constitutive model which can describe the mechanical response over a large range of strain rates. Then we add a rate-dependent temperature item into the modified model to make a thermovisco-hyperelastic constitutive model. By comparing the experimental results with the model, we find that the thermovisco-hyperelastic constitutive model can correctly describe the uniaxial compressive mechanical properties of NEPE propellant at different temperatures and over a large range of strain rates from the static state to 4500 s−1.

YANG L M , SHIM V P W , LIM C T . A visco-hyperelastic approach to modelling the constitutive behaviour of rubber [J ] . International Journal of Impact Engineering , 2000 , 24 ( 6/7 ): 545 - 560 . DOI: 10.1016/S0734-743X(99)00044-5 http://doi.org/10.1016/S0734-743X(99)00044-5 https://linkinghub.elsevier.com/retrieve/pii/S0734743X99000445 https://linkinghub.elsevier.com/retrieve/pii/S0734743X99000445

韩龙 . 复合固体推进剂细观损伤机理及本构模型研究 [D ] . 南京 : 南京理工大学 , 2017 .

HAN L . Research on themesoscopic damage mechanism and nonlinear viscoelastic constitutive model of composite propellant [D ] . Nanjing : Nanjing University of Science and Technology , 2017 . (in Chinese)

LI T P , XU J S , HAN J L , et al . Effect of microstructure on micro-mechanical properties of composite solid propellant [J ] . Micromachines , 2021 , 12 ( 11 ): 1378 . DOI: 10.3390/mi12111378 http://doi.org/10.3390/mi12111378 https://www.mdpi.com/2072-666X/12/11/1378 https://www.mdpi.com/2072-666X/12/11/1378 This study was aimed at determining the effect of microstructure on the macro-mechanical behavior of a composite solid propellant. The microstructure model of a composite solid propellant was generated using molecular dynamics algorithm. The correlation of how microstructural mechanical properties and the effect of initial interface defects in propellant act on the macro-mechanics were studied. Results of this study showed that the mechanical properties of propellant rely heavily on its mesoscopic structure. The grain filling volume fraction mainly influences the propellant initial modulus, the higher the volume fraction, the higher initial modulus. Additionally, it was found that the ratio of particles influences the tensile strength and breaking elongation rate of the propellant. The big particles could also improve the initial modulus of a propellant, but decrease its tensile strength and breaking elongation rate. Furthermore, the initial defects lowered the uniaxial tensile modulus, tensile strength, and the relaxation modulus of propellant, but did not affect the relaxation behavior of the propellant.

乌布力艾散·麦麦提图尔荪 , 吴艳青,侯晓,王宁.细观结构参量对推进剂力学性能影响的数值研究 [J ] . 复合材料学报 , 2022 , 39 ( 6 ): 2949 - 2961 .

MAIMAITITUERSUN W B L A S , WU Y Q , HOU X , et al . Numerical investigations on mesoscopic structure parameters affecting mechanical responses of propellant [J ] . Acta Materiae Compositae Sinica , 2022 , 39 ( 6 ): 2949 - 2961 . (in Chinese)

VAN RAMSHORST M C J , et al .DI BENEDETTO G L, DUVALOIS W, Investigation of the Failure Mechanism of HTPB/AP/Al propellant by In-situ Uniaxial Tensile Experimentation in SEM [J ] . Propellants, Explosives, Pyrotechnics , 2016 , 41 ( 4 ): 700 - 708 . DOI: 10.1002/prep.v41.4 http://doi.org/10.1002/prep.v41.4 https://onlinelibrary.wiley.com/toc/15214087/41/4 https://onlinelibrary.wiley.com/toc/15214087/41/4

HOU Y F , XU J S , ZHOU C S , et al . Microstructural simulations of debonding, nucleation, and crack propagation in an HMX-MDB propellant [J ] . Materials & Design , 2021 , 207 : 109854 .

XU F , ARAVAS N , SOFRONIS P . Constitutive modeling of solid propellant materials with evolving microstructural damage [J ] . Journal of the Mechanics and Physics of Solids , 2008 , 56 ( 5 ): 2050 - 2073 . DOI: 10.1016/j.jmps.2007.10.013 http://doi.org/10.1016/j.jmps.2007.10.013 https://linkinghub.elsevier.com/retrieve/pii/S0022509607002074 https://linkinghub.elsevier.com/retrieve/pii/S0022509607002074

HUR J , PARK J B , JUNG G D , et al . Enhancements on a micromechanical constitutive model of solid propellant [J ] . International Journal of Solids and Structures , 2016 , 87 : 110 - 119 . DOI: 10.1016/j.ijsolstr.2016.02.025 http://doi.org/10.1016/j.ijsolstr.2016.02.025 https://linkinghub.elsevier.com/retrieve/pii/S0020768316000871 https://linkinghub.elsevier.com/retrieve/pii/S0020768316000871

韩龙 , 许进升 , 周长省 . 基体特性对HTPB推进剂力学性能的影响 [J ] . 航空动力学报 , 2017 , 32 ( 10 ): 2553 - 2560 .

HAN L , XU J S , ZHOU C S . Effect of matrix material properties on the mechanical behavior of HTPB composite propellant [J ] . Journal of Aerospace Power , 2017 , 32 ( 10 ): 2553 - 2560 . (in Chinese)

CHU C C , NEEDLEMAN A . Void nucleation effects in biaxially stretched sheets [J ] . Jounal of Engineering Materials and Technology , 1980 , 102 ( 3 ): 249 - 256 .

李辉 , 许进升 , 周长省 , 等 . HTPB推进剂温度相关性失效准则 [J ] . 含能材料 , 2018 , 26 ( 9 ): 732 - 738 .

LI H , XU J S , ZHOU C S , et al . Failure criterion related to temperature for HTPB propellant [J ] . Chinese Journal of Energetic Materials , 2018 , 26 ( 9 ): 732 - 738 . (in Chinese)

王鸿丽 . 改性双基推进剂含损伤粘弹塑性本构模型及应用研究 [D ] . 南京 : 南京理工大学 , 2018 .

WANG H L . Research on visco-Elastic-plastic constitutive model with damage of modified double-base propellant and its application [D ] . Nanjing : Nanjing University of Science and Technology , 2018 . (in Chinese)

马赛尔 . 复合推进剂高应变率力学性能及本构模型研究 [D ] . 南京 : 南京理工大学 , 2017 .

MA S E . Research on the mechanical properties and constitutive model of composite propellant [D ] . Nanjing : Nanjing University of Science and Technology , 2017 . (in Chinese)

程吉明 . 预应变作用下复合固体推进剂损伤本构及应用研究 [D ] . 西安 : 西北工业大学 , 2019 .

CHENG J M . Damage constitutive model of composite solid propellant under prestrain and its application [D ] . Xi’an : Northwestern Polytechnical University , 2019 . (in Chinese)

刘梅 , 高波 , 董新刚 , 等 . 固体发动机药柱完整性失效的判据 [J ] . 固体火箭技术 , 2018 , 41 ( 4 ): 424 - 427 ,508.

LIU M , GAO B , DONG X G , et al . Failure criterion of solid motors at ignition pressurization loading [J ] . Journal of Solid Rocket Technology , 2018 , 41 ( 4 ): 424 - 427 ,508. (in Chinese)

SHEN Z B , ZHANG L , LI Y F . Structural integrity analysis and experimental investigation for solid rocket motor grain subjected to low temperature ignition [C ] //Proceedings of the 2019 7th Asia Conference on Mechanical and Materials Engineerin. Tokyo , Japan : EDP Sciences , 2019 , 293 : 04005 .

宋仕雄 . 低温点火状态下固体发动机药柱结构完整性分析 [D ] . 西安 : 航天动力技术研究院 , 2018 .

SONG S X . Structural integrity analysis of solid motor grain under low temperature ignition [D ] . Xi’an :The 41st Institute of the Fourth Academy of CASC, 2018. (in Chinese)