Analysis of Propellant Pellets’ Dispersion Characteristics of Single Modular Charge Based on Discrete Element Method for Non-Spherical Particles

Ziyu LI; Yonggang YU

doi:10.12382/bgxb.2022.0015

您当前的位置：

首页 >

文章列表页 >

Analysis of Propellant Pellets’ Dispersion Characteristics of Single Modular Charge Based on Discrete Element Method for Non-Spherical Particles

更新时间：2025-08-18

- Analysis of Propellant Pellets’ Dispersion Characteristics of Single Modular Charge Based on Discrete Element Method for Non-Spherical Particles
- Acta Armamentarii Vol. 44, Issue 5, Pages: 1330-1338(2023)
- 作者机构：
  
  南京理工大学能源与动力工程学院, 江苏南京 210094
- 作者简介：
- 基金信息：
- DOI：10.12382/bgxb.2022.0015
  CLC：
- Received：05 January 2022，
  
  Published Online：19 July 2023，
  
  Published：31 May 2023
- 稿件说明：
移动端阅览
Ziyu LI, Yonggang YU. Analysis of Propellant Pellets’ Dispersion Characteristics of Single Modular Charge Based on Discrete Element Method for Non-Spherical Particles[J]. Acta Armamentarii, 2023, 44(5): 1330-1338.
DOI：

Ziyu LI, Yonggang YU. Analysis of Propellant Pellets’ Dispersion Characteristics of Single Modular Charge Based on Discrete Element Method for Non-Spherical Particles[J]. Acta Armamentarii, 2023, 44(5): 1330-1338. DOI： 10.12382/bgxb.2022.0015.

摘要

为研究全等式模块装药背景下单模块装药点传火过程中火药颗粒群的散布特性及药粒堆积形态

提出三维非稳态气-固两相流模型

在取不同的模块药盒装填位置的初始条件下进行数值模拟

其中柱状火药颗粒由球元法构建。通过离散单元法(DEM)获得的数值结果与试验结果进行比较

发现上述模型是合理可行的

并且比球形颗粒模型更为精确。研究结果表明:在模块药盒初始装填位置距底火端分别为10mm、40mm、70mm和100mm时

终态药粒分布于模块药盒右端面外侧

依次呈水平堆积和坡状堆积;随着模块药盒与底火端的距离增加

水平堆积轴向长度从293.3mm减少至203.8mm

坡状堆积的坡角由22.01°降为19.82°

即随着模块药盒向右移动

药粒水平堆积起点右移

轴向长度呈线性缩短

但坡状堆积轴向长度大致不变

坡度变缓。

Abstract

A three-dimensional unsteady gas-solid two-phase flow model is proposed to investigate the distribution and stacking characteristics of propellant pellets during the ignition and flame-spreading processes of a single modular charge in the uni-modular charge. Numerical simulations are carried out under different initial conditions at the filling positions of modular cartridges

in which cylindrical pellets are constructed by the multi-element method. The numerical results obtained by the discrete element method (DEM) indicate good agreement with the experimental results

and that the cylindrical particle model is more accurate than the spherical particle model. The simulation results suggest that: when the modular cartridge’s initial loading location is 10mm

40mm

70mm

and 100mm from the primer

the pellets are finally distributed on the outside of the right end of the cartridge

showing horizontal and sloped stacking in turn; the axial length of horizontal stacking is reduced from 293.3mm to 203.8mm

and the angle of the sloped stacking decreases from 22.01° to 19.82° when the distance between the initial loading position of the modular cartridge and the primer increases from 10mm to 100mm; in other words

as the modular cartridge moves to the right

the starting point of horizontal stacking moves to the right

and the axial length decreases linearly; however

the axial length of sloped stacking is almost unchanged

and the slope becomes flat.

关键词

Keywords

references

RUTH C R , THOMAS C . Experimental study of flame spreading processes in 155mm xm216 modular propelling charge [R ] . AD-AII4352, 1990 .

陆中兵 , 周彦煌 , 丁珏 , 等 . 模块装药膛内火焰扩散过程的理论研究 [J ] . 弹道学报 , 1998 , 10 ( 3 ): 6 - 10 .

LU Z B , ZHOU Y H , DING J , et al. Theoretical studies of flamespreading processes of modular charges [J ] . Journal of Ballistics , 1998 , 10 ( 3 ): 6 - 10 . (in Chinese)

陆中兵 , 周彦煌 . 模块装药火炮膛内两相燃烧模型及压力波模拟 [J ] . 爆炸与冲击 , 1999 , 19 ( 3 ): 269 - 273 .

LU Z B , ZHOU Y H . Two-phase-combustion mode and numerical simulation of pressure wave in the gun with modular charges [J ] . Explosion and Shock Waves , 1999 , 19 ( 3 ): 269 - 273 . (in Chinese)

王育维 , 魏建国 , 郭映华 , 等 . 模块装药压力波数值模拟 [J ] . 火炮发射与控制学报 , 2000 ( 4 ): 1 - 5 .

WANG Y W , WEI J G , GUO Y H , et al. Simulation of pressure wave in modular charge system [J ] . Journal of Gun Launch & Control , 2000 ( 4 ): 1 - 5 . (in Chinese)

王育维 , 郭映华 , 董彦诚 , 等 . 可燃容器对小号模块装药压力波影响的研究 [J ] . 火炮发射与控制学报 , 2016 , 37 ( 2 ): 31 - 35 .

WANG Y W , GUO Y H , DONG Y C , et al. Study of com-bustible case effects on pressure waves for lowzone of bi-modular charge [J ] . Journal of Gun Launch & Control , 2016 , 37 ( 2 ): 31 - 35 . (in Chinese)

马华庆 , 赵永志 . 喷动流化床中杆状颗粒混合特性的CFD-DEM模拟 [J ] . 浙江大学学报(工学版) , 2020 , 54 ( 7 ): 1347 - 1354 .

MA H Q , ZHAO Y Z . CFD-DEM investigation on mixing of rod-like particles in spout-fluid bed [J ] . Journal of Zhejiang University (Engineering Science) , 2020 , 54 ( 7 ): 1347 - 1354 . (in Chinese)

WANG T Y , GAO Q H , DENG A M , et al. Numerical and experimental investigations of instability in a spouted bed with non-spherical particles [J ] . Powder Technology , 2021 , 379 : 231 - 240 . DOI: 10.1016/j.powtec.2020.10.032 http://doi.org/10.1016/j.powtec.2020.10.032 https://linkinghub.elsevier.com/retrieve/pii/S0032591020309815 https://linkinghub.elsevier.com/retrieve/pii/S0032591020309815

LIU X J , ZHONG W Q , JIANG X F , et al. Spouting behaviors of binary mixtures of cylindroid and spherical particles [J ] . AIChE Journal , 2015 , 61 ( 1 ): 58 - 67 . DOI: 10.1002/aic.14636 http://doi.org/10.1002/aic.14636 https://onlinelibrary.wiley.com/doi/10.1002/aic.14636 https://onlinelibrary.wiley.com/doi/10.1002/aic.14636

LIU X J , ZHONG W Q , YU A , et al. Mixing behaviors in an industrial-scale spout-fluid mixer by 3D CFD-TFM [J ] . Powder Technology , 2017 , 314 : 455 - 465 . DOI: 10.1016/j.powtec.2016.10.046 http://doi.org/10.1016/j.powtec.2016.10.046 https://linkinghub.elsevier.com/retrieve/pii/S0032591016307288 https://linkinghub.elsevier.com/retrieve/pii/S0032591016307288

LIU X J , GAN J Q , ZHONG W Q , et al. Particle shape effects on dynamic behaviors in a spouted bed: CFD-DEM study [J ] . Powder Technology , 2020 , 361 : 349 - 362 . DOI: 10.1016/j.powtec.2019.07.099 http://doi.org/10.1016/j.powtec.2019.07.099 https://linkinghub.elsevier.com/retrieve/pii/S0032591019305911 https://linkinghub.elsevier.com/retrieve/pii/S0032591019305911

OSCHMANN T , VOLLMARI K , KRUGGEL-EMDEN H , et al. Numerical investigation of the mixing of non-spherical particles in fluidized beds and during pneumatic conveying [J ] . Procedia Engineering , 2015 , 102 : 976 - 985 . DOI: 10.1016/j.proeng.2015.01.220 http://doi.org/10.1016/j.proeng.2015.01.220 https://linkinghub.elsevier.com/retrieve/pii/S1877705815002398 https://linkinghub.elsevier.com/retrieve/pii/S1877705815002398

ZHONG W Q , ZHANG Y , JIN B S , et al. Discrete element method simulation of cylinder-shaped particle flow in a gas-solid fluidized bed [J ] . Chemical Engineering and Technology , 2009 , 32 ( 3 ): 386 - 391 . DOI: 10.1002/ceat.v32:3 http://doi.org/10.1002/ceat.v32:3 http://doi.wiley.com/10.1002/ceat.v32%3A3 http://doi.wiley.com/10.1002/ceat.v32%3A3

OSCHMANN T , HOLD J , KRUGGEL-EMDEN H . Numerical investigation of mixing and orientation of non- spherical particles in a model type fluidized bed [J ] . Powder Technology , 2014 , 258 : 304 - 323 . DOI: 10.1016/j.powtec.2014.03.046 http://doi.org/10.1016/j.powtec.2014.03.046 https://linkinghub.elsevier.com/retrieve/pii/S0032591014002460 https://linkinghub.elsevier.com/retrieve/pii/S0032591014002460

NAN W G , WANG Y S , WANG J Z . Numerical analysis on the fluidization dynamics of rodlike particles [J ] . Advanced Powder Technology , 2016 , 27 : 2265 - 2276 . DOI: 10.1016/j.apt.2016.08.015 http://doi.org/10.1016/j.apt.2016.08.015 https://linkinghub.elsevier.com/retrieve/pii/S0921883116302254 https://linkinghub.elsevier.com/retrieve/pii/S0921883116302254

VOLLMARI K , JASEVICIUS R , KRUGGEL-EMDEN H . Experimental and numerical study of fluidization and pressure drop of spherical and non-spherical particles in a model scale fluidized bed [J ] . Powder Technology , 2016 , 291 : 506 - 521 . DOI: 10.1016/j.powtec.2015.11.045 http://doi.org/10.1016/j.powtec.2015.11.045 https://linkinghub.elsevier.com/retrieve/pii/S0032591015301881 https://linkinghub.elsevier.com/retrieve/pii/S0032591015301881

MAHAJAN V V , NIJSSEN T M , KUIPERS J , et al. Non-spherical particles in a pseudo-2D fluidised bed: modelling study [J ] . Chemical Engineering Science , 2018 , 192 : 1105 - 1123 . DOI: 10.1016/j.ces.2018.08.041 http://doi.org/10.1016/j.ces.2018.08.041 https://linkinghub.elsevier.com/retrieve/pii/S0009250918306195 https://linkinghub.elsevier.com/retrieve/pii/S0009250918306195

MA H Q , ZHAO Y Z , CHENG Y . CFD-DEM modeling of rod-like particles in a fluidized bed with complex geometry [J ] . Powder Technology , 2019 , 344 : 673 - 683 . DOI: 10.1016/j.powtec.2018.12.066 http://doi.org/10.1016/j.powtec.2018.12.066 https://linkinghub.elsevier.com/retrieve/pii/S0032591018311033 https://linkinghub.elsevier.com/retrieve/pii/S0032591018311033

WANG S , SHEN Y S . Super-quadric CFD-DEM simulation of chip-like particles flow in a fluidized bed [J ] . Chemical Engineering Science , 2022 , 251 : 117431 . DOI: 10.1016/j.ces.2022.117431 http://doi.org/10.1016/j.ces.2022.117431 https://linkinghub.elsevier.com/retrieve/pii/S000925092200015X https://linkinghub.elsevier.com/retrieve/pii/S000925092200015X

陈安 , 余永刚 . 两模块装药点传火过程及药粒散布特性 [J ] . 爆炸与冲击 , 2021 , 41 ( 7 ): 39 - 49 .

CHEN A , YU Y G . Ignition process and propellant grains distribution of the two-module charge [J ] . Explosion and Shock Waves , 2021 , 41 ( 7 ): 39 - 49 . (in Chinese)

陈安 , 余永刚 . 单模块装药点传火过程中药粒散布模拟试验与仿真 [J ] . 含能材料 , 2020 , 28 ( 8 ): 731 - 739 .

CHEN A , YU Y G . Modeling test and simulation study of gra- nular dispersion characteristics for single modular charge ig- nition and flame-spreading [J ] . Chinese Journal of Energetic Materials , 2020 , 28 ( 8 ): 731 - 739 . (in Chinese)

任冰 . 稠密气固系统非球形颗粒运动机制的试验和CFD-DEM耦合模拟研究 [D ] . 南京 : 东南大学 , 2013 .

REN B . Experimental investigation and CFD-DEM simulation of gas-solid flow mechanisms of non-spherical particles in dense gas-solid system [D ] . Nanjing : Southeast University , 2013 . (in Chinese)

王国强 , 郝万军 , 王继新 . 离散单元法及其在EDEM上的实践 [M ] . 西安 : 西北工业大学出版社 , 2010 .

WANG G Q , HAO W J , WANG J X . Discrete element method and its practice on EDEM [M ] . Xi’an : Northwestern Polytechnical University Press , 2010 . (in Chinese)

Views

下载量

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

Overall Design and Adaptability Evaluation of Modular Firepower System for Multi-platform Universal Artillery

Multi-objective Optimization of Artillery Firepower Strike System

Interior Ballistic Performance of High-loading-density Modular Charge Based on Sequential Loading

Development and Trend of Research on Fault Diagnosis Methods for Ammunition Loading System

A Review of Refined Interior Ballistics Model of Artillery: Model-driven and Data-driven ZHANG Xiaobing *, XIAO Yutang

Related Author

Hua GAO

Chunlai SHAN

Can REN

Pengke LIU

Fanfan ZHANG

Huashi YANG

Long ZHANG

Linfang QIAN

Related Institution

School of Mechanics and Transportation Engineering, Northwestern Polytechnical University

Engineering Simulation and Testing Technology Department, Northwest Institute of Mechanical and Electrical Engineering

Northwest Institute of Mechnical & Electrical Engineering, Xianyang 712099, Shannxi

School of Mechanical Engineering, Nanjing University of Science and Technology

Postal code：100089
Tel：010-68963060/68962718 Fax：010-68963025 Email：bgxb@cos.org.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备05059581号-4 京公网安备11010802024360号
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.
Total Visits：44495 Visits Today：475

⁰