Buffering Mechanism and Characteristic Optimization of Ultra-light Artillery Backtrail

doi:10.3969/j.issn.1000-1093.2020.09.007

Abstract

Abstract: Launching stability is a key constraint in the design of ultra-light artillery. Through the analysis of the firing dynamics of the whole artillery, the influences of two kinds of buffer arrangement schemes on the firing stabilities of an artillery designed with tranditional structural principle (A-type) and an artillery designed with new structural principle (B-type) are analyzed, and the corresponding optimization design of buffer characteristics is also carried out. The results show that the effect of backtrail buffer on improving the firing stability of A-type artillery is not obvious; it is beneficial for B-type artillery to improve the stress on the backtrail and increase the firing stability by adding the backtrail buffer on its top.

Key words: ultra-lightartillery, backtrail, bufferdevice, hydraulicbuffer, multi-objectiveoptimization, launchingdynamics

CLC Number:

TJ303⁺.4

ZHANG Cheng， LIU Zhaoyang， GU Keqiu. Buffering Mechanism and Characteristic Optimization of Ultra-light Artillery Backtrail[J]. Acta Armamentarii, 2020, 41(9): 1752-1761.

References 15

［1］	高跃飞，郝秀平.新型牵引榴弹炮炮架结构分析计算[J].华北工学院学报，1999，20(1)：5-9.GAO Y F，HAO X P.Analysis of a new light towed howitzer carriage[J].Journal of North China Institute of Technology，1999，20(1)： 5-9.(in Chinese)
[2]	张鑫磊，顾克秋，张志军.某轻型牵引炮摇架结构动态优化设计[J].兵器装备工程学报，2016，37(1)：48-51.ZHANG X L，GU K Q，ZHANG Z J.Dynamic optimization for cradle carriage of a lightweight towed howitzer[J].Journal of Ordnance Equipment Engineering，2016，37(1)：48-51.(in Chinese)
[3]	黄景峰，董楠，刘圣杰.基于Simulink的液压缓冲器动态特性分析[J].机床与液压，2015，43（13）：145-148.HUANG J F，DONG N，LIU S J. Study on dynamic characteristics of hydraulic bumper based on Simulink[J].Machine Tool & Hydraulics，2015，43(13)：145-148.(in Chinese)
[4]	李鑫，王惠源，赵良伟.身管后坐式链式机枪缓冲装置动力学仿真研究[J].火炮发射与控制学报，2020，41(1)：50-54.LI X，WANG H Y，ZHAO L W. Research on dynamics simulation of buffer device for the barrel recoil of chain gun[J].Journal of Gun Launch & Control，2020，41(1)：50-54.(in Chinese)
[5]	郑佳佳，阚君武，张广.火炮反后坐多级独立式磁流变缓冲器可控性分析[J].兵工学报，2019，40(4)：708-717.ZHENG J J，KAN J W，ZHANG G.Controllability analysis of a novel multi-coil magnetorheological absorber for gun recoil mitigation[J].Acta Armamentarii，2019，40(4)：708-717.(in Chinese)
[6]	马星国，吴琼，尤小梅，等.渐变节流液压缓冲器特性分析与结构优化[J].机床与液压，2015，43(19)：101-104.MA X G，WU Q，YOU X M，et al.Performance analysis and structural optimization of gradual throttling hydraulic buffer[J].Machine Tool & Hydraulics，2015，43(19)：101-104.(in Chinese)
[7]	李世康，李强，谭庆，等.基于isight的某转管武器弹簧缓冲器优化设计[J].兵工自动化，2018，37(5)：49-51.LI S K，LI Q，TAN Q，et al.Optimization design of certain type Gatling gun weapon buffer spring device based on isight[J].Ordnance Industry Automation，2018，37(5)：49-51.(in Chinese)
[8]	姚养无.大口径狙击步枪液气缓冲器设计[J].中北大学学报，2013，34(4)：394-397.YAO Y W.The design on the hydro-pneumatic buffer of the large caliber sniper rifle[J].Journal of North University of China，2013，34(4)：394-397.(in Chinese)
[9]	孟祥，李志刚，周成.液压缓冲器节流杆优化设计[J].机床与液压，2018，46(10)：60-62.MENG X，LI Z G，ZHOU C.Optimization design of throttle rod for hydraulic bumper[J].Machine Tool & Hydraulics，2018，46(10)：60-62.(in Chinese)
[10]	张宏宇，蒋爱民，徐轶群，等.基于粒子群算法的液压缓冲器优化设计[J].液压气动与密封，2019，6(4)：8-11.ZHANG H Y，JIANG A M，XU Y Q，et al.Structural optimization of hydraulic buffer based on PSO algorithm[J].Hydraulics Pneumatics & Sesals，2019，6(4)：8-11.(in Chinese)
[11]	王成龙，邱志伟，曾庆良，等.基于模拟退火算法的多孔式液压缓冲器阻尼孔优化[J].液压与气动，2019 (4)：54-59.WANG C L，QIU Z W，ZENG Q L，et al.Optimization based on the simulated annealing for damping holes of porous hydraulic damper[J].Chinese Hydraulics & Pneumatics，2019(4)：54-59.(in Chinese)
[12]	王颖，邵万珍.新型液气缓冲器结构参数对阻抗力的影响研究[J].轻工科技，2019，35(3)：60-62.WANG Y，SHAO W Z.Research on the influence of structural parameters of a new type of hydro pneumatic buffer on the impe- dance force[J].Light Industry Science and Technology，2019，35(3)： 60-62.(in Chinese)
[13]	SHEN G，PRATT I. The development of a railway dynamics modeling and simulation package to cater for current industrial trends[J].Journal of Rapid Transit，2001，215(F3)：167-168.
[14]	PARTOVI M A，MUGAN A.Design and analysis of a hydraulic-elastic railcar buffer[J].ProQuest，2018，25(10)：1994-2005.
[15]	BI K，LI X，WEI Y M，et al.Calculation and analysis on characteristic of hydraulic sheave buffer by AMESim[J].Atlantis Press，2016，23(3)：17-19.

[1]	LU Yuming, ZHANG Xiangfei, LI Ming, ZHAO Minqing. Robust Optimization Design of Fixture Locating Scheme Based on Constrained Multi-objective Optimization Algorithm [J]. Acta Armamentarii, 2022, 43(3): 686-693.
[2]	HU Jing， ZHAI Jiutong， ZHANG Xinming， LI Hailong， XUN Bo. Structural Optimization Design of Double-decker Ball Bearing Based on Response Surface Methodology [J]. Acta Armamentarii, 2022, 43(3): 694-703.
[3]	SUN Xiaowang， ZHANG Jincheng， PENG Bing， ZHANG Jinkun， WANG Xianhui. Design and Optimization of Occupant Lower Limb Protection Device against Explosion Shock below Military Vehicle [J]. Acta Armamentarii, 2021, 42(12): 2555-2564.
[4]	QIAN Long， CHANG Sijiang， NI Yi. Multi-objective Optimization of Aerodynamic Shape of Microspoiler for Spin-stabilized Projectile [J]. Acta Armamentarii, 2021, 42(12): 2575-2585.
[5]	WANG Yadong， SHI Quan， YOU Zhifeng， WANG Fang， XIA Wei. Spare Parts Supply Optimization and Decision-making Based on Cross-efficiency Multi-objective Sorting Evolutionary Algorithm [J]. Acta Armamentarii, 2020, 41(11): 2338-2346.
[6]	WANG Yadong, SHI Quan, CHEN Cai, YOU Zhifeng. Location-allocation Joint Optimization Model of Spare Parts Supply under Supply Disruption Risk [J]. Acta Armamentarii, 2019, 40(8): 1708-1715.
[7]	LUO Qingguo, ZHAO Yao, GUI Yong, LIU Hongbin , SHUAI Gang. Research on Optimization of Louvered Fin with Hybrid Multi-objective Optimizations Based on EDA and AIS [J]. Acta Armamentarii, 2019, 40(4): 689-696.
[8]	XU Gong-guo , DUAN Xiu-sheng, SHAN Gan-lin, TONG Jun. Optimization Deployment of Multi-sensors in Complex Terrain Based on Multi-objective LM-AQPSO Algorithm [J]. Acta Armamentarii, 2018, 39(11): 2192-2201.
[9]	YANG Fan， WANG Tie-ning. Research on Multi-objective Optimization of Multi-item Maintenance Material Distribution Problem [J]. Acta Armamentarii, 2017, 38(6): 1186-1191.
[10]	CHEN Rui， NI Jin-ping. Optimization Method of Light-screen-array Structure Parameters of Photoelectric Target Based on Orthogonal Test [J]. Acta Armamentarii, 2017, 38(11): 2234-2239.