[1] Starkenberg J. Ignition of solid high explosive by the rapid compression of an adjacent gas layer[C]∥Proceedings of 7th International Symposium on Detonation. White Oak, MD:Naval Surface Weapons Center, 1981:3-16. [2] 李文彬, 王晓鸣, 赵国志, 等. 装药底隙对弹底应力及发射安全性影响研究[J]. 弹道学报, 2001,13(3):64-67. LI Wen-bin, WANG Xiao-ming,ZHAO Guo-zhi, et al. The research of the effect of base gap on the stress of explosives and the lunching safety[J]. Journal of Ballistics, 2001, 13(3):64-67.(in Chinese) [3] 卢艳平, 王珏, 喻洪麟. 基于工业CT成像的弹药小底隙测量方法研究[J]. 兵工学报, 2009, 30(12):1714-1717. LU Yan-ping, WANG Jue, YU Hong-lin. Study on measurement method for small bottom gap of ammunition by industrial CT imaging[J]. Acta Armamentarii, 2009, 30(12):1714-1717.(in Chinese) [4] 周培毅, 徐更光, 王廷增. 炸药装药在后座冲击条件下的点火模型研究[J]. 火炸药学报, 2000, 1(1):1-5. ZHOU Pei-yi, XU Geng-guang, WANG Ting-zeng. Ignition models of explosive charge subjected to setback impact[J]. Chinese Journal of Explosives & Propellants, 2000, 1(1):1-5.(in Chinese) [5] United States Department of Defense. MIL-P-63252A Projectile, 155 mm, HE, M795 loading, assembling and packing; military specification[S]. US: United States Department of Defense, 1995. [6] 卢国胜, 施军, 王凯. 中大口径榴弹采用 ICT 检验注装药底隙方案研究[J]. 弹箭与制导学报, 2010, 30(1):121-123. LU Guo-sheng, SHI Jun, WANG Kai. Research of checking base separation to be injected of loading explosive charge in the large and middle calibers HE shells through an ICT plan[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2010, 30(1):121-123. (in Chinese) [7] Wells K, Chiverton J, Partridge M, et al. Quantifying the partial volume effect in PET using Benford’s law[J]. IEEE Transactions on Nuclear Science, 2007, 54(5):1616-1625. [8] Dehmeshki J, Ye X J, Amin H, et al. Volumetric quantification of atherosclerotic plaque in CT considering partial volume effect[J]. IEEE Transactions on Medical Imaging, 2007, 26(3):273- 282. [9] Kropas C V, Moran T J, Yancey R N. Effect of composition on density measurement by X-ray computed tomography[J]. Materials Evaluation, 1991, 49(4):487-489. |