[1] 张浩宇, 张树凯, 程立, 等.杀伤爆破战斗部起爆方式对地面目标杀伤威力的影响[J].兵工学报, 2021, 42(11):2300-2309. ZHANG H Y, ZHANG S K, CHENG L, et al.The impact of initiation mode of blast fragmentation warhead on the power to kill the ground target[J].Acta Armamentarii, 2021, 42(11):2300-2309.(in Chinese) [2] GOLSDMITH W, FINNEGAN S A. Penetration and perforation processes in metal targets at and above ballistic velocities[J].International Journal of Mechanical Sciences, 1971, 13(10):843- 866. [3] 谭多望, 李翔, 温殿英, 等.球形钨合金破片终点弹道性能实验研究[J].爆炸与冲击, 2003, 23(5):425-429. TAN D W, LI X, WEN D Y,et al.Experimental investigation of terminal effects of spherical tungsten fragments[J].Explosion and Shock Waves, 2003, 23(5):425-429.(in Chinese) [4] 陈志斌.钨合金预制破片对靶板侵彻机理研究[D].北京:北京理工大学, 2007. CHEN Z B.Study on penetration mechanism of tungsten alloy preformed fragment into target[D].Beijing: Beijing Institute of Technology,2007.(in Chinese) [5] 午新民.钨合金球体对有限厚靶板侵彻的理论与试验研究[D].北京:北京理工大学, 1999. WU X M.Theoretical and experimental study on penetration of tungsten alloy sphere into finite thickness target[D].Beijing:Beijing Institute of Technology, 1999.(in Chinese) [6] 徐豫新.破片毁伤效应若干问题研究[D].北京:北京理工大学, 2012. XUN Y X.Research on problems of fragment damage effects[D].Beijing:Beijing Institute of Technology, 2012.(in Chinese) [7] 朱曦光, 梁栋, 涂建, 等.钨合金破片高速穿甲工程计算方法探讨[J]. 兵器材料科学与工程, 2017, 40(1):51-55. ZHU X G, LIANG D,TU J,et al.Calculating method of tungsten alloy fragment penetrating steel target at high velocity[J].Ordnance Material Science and Engineering, 2017,40(1):51-55.(in Chinese) [8] 李金福, 智小琦, 范兴华.钨球及六棱钨柱破片侵彻Q235叠层靶特性研究[J].火炮发射与控制学报, 2021, 42(2):28-33, 39. LI J F, ZHI X Q, FAN X H.Study on the characteristics of the tungsten ball and hexagonal tungsten prism fragments penetrating Q235 laminated targets[J].Journal of Gun Launch & Control, 2021, 42(2):28-33, 39.(in Chinese) [9] 张钰龙, 郑宾, 郭华玲, 等.球形钨破片侵彻钢靶毁伤效应研究[J].兵器装备工程学报, 2020, 41(5):32-36. ZHANG Y L, ZHENG B, GUO H L, et al.Study on damage effect of spherical tungsten fragments penetrating steel targets[J].Journal of Ordnance Equipment Engineering, 2020, 41(5):32-36.(in Chinese) [10] LIU B, VILLAVICENCIO R, GUEDES SOARES C.On the failure criterion of aluminum and steel plates subjected to low-velocity impact by a spherical indenter[J].International Journal of Mechanical Sciences, 2014,80:1-15. [11] 程瑶, 赵太勇, 陈智刚, 等.低中速钨球变形与速度关系计算模型[J].爆破器材, 2019, 48(5):52-56. CHENG Y, ZHAO T Y, CHEN Z G, et al.Calculation model of relationship between deformation and velocity of low and medium speed tungsten ball[J].Explosive Materials, 2019, 48(5):52-56.(in Chinese) [12] ROSENBERG Z, DEKEL E.On the deep penetration of deforming long rods[J].International Journal of Solids and Structures, 2010, 47(2):238-250. [13] 张江跃, 谭华, 虞吉林.双屈服法测定93W合金的屈服强度[J].高压物理学报, 1997(4):254-259. ZHANG J Y, TAN H, YU J L.Determination of the yield strength of 93W alloys by using AC techniques[J].Chinese Journal of High Pressure Physics,1997(4):254-259.(in Chinese) [14] ROSENBERG Z, MAEMOR E, MAYSELESS M.On the hydrodynamic theory of long-rod penetration[J].International Journal of Impact Engineering, 1990,10(1/2/3/4):483-486. [15] TATE A.A possible explanation for the hydrodynamic transition in high speed impact[J].International Journal of Mechanical Sciences, 1977, 19(2):121-123. [16] HU K, LI X Q, AI X,et al.Fabrication, characterization, and mechanical properties of 93W-4.9Ni-2.1Fe/95W-2.8Ni-1.2Fe-1Al2O3 heavy alloy composites[J].Materials Science and Engineering:A, 2015, 636:452-458. [17] 徐豫新, 任杰, 王树山.钨球正撞击下低碳钢板的极限贯穿厚度研究[J].北京理工大学学报, 2017, 37(6):551-556. XU Y X, REN J, WANG S S.Research on the performation limit through thickness of low carbon steel plate Impact Normally under the impact of tungsten sphere[J].Transcation of Beijing Institute of Technology, 2017, 37(6):551-556.(in Chinese) [18] 徐豫新, 王树山, 伯雪飞, 等.钨合金球形破片对低碳钢的穿甲极限[J].振动与冲击, 2011, 30(5):192-195. XU Y X, WANG S S,BO X F,et al.Armor-piercing ultimate of tungsten alloy spherical fragment against low-carbon steel[J].Journal of Vibration and Shock, 2011, 30(5):192-195.(in Chinese) [19] SUN Y H, SHI C C,ZHENG L,et al.Theoretical research progress in high-velocity/hypervelocity impact on semi-infinite targets[J].Shock and Vibration, 2015(4): 265321. [20] ANDERSON Jr C E.Analytical models for penetration mechanics:a review [J].International Journal of Impact Engineering, 2017, 108:3-26. [21] ANDERSON Jr C E, RIEGEL J P. A penetration model for metallic targets based on experimental data[J]. International Journal of Impact Engineering, 2015, 80:24-35. [22] 黄长强, 朱鹤松.球形破片对靶板极限穿透速度公式的建立[J].弹箭与制导学报, 1993(2):58-61. HUANG C Q, ZHU H S.Establishment of limit penetration velocity formula of spherical fragment to target[J].Journal of Projectiles, Rockets, Missiles and Guidance, 1993(2):58-61.(in Chinese) [23] 徐豫新, 韩旭光, 赵晓旭, 等.钨合金高速侵彻低碳钢板失效行为实验研究[J].稀有金属材料与工程, 2016, 45(1):122-126. XU Y X, HAN X G, ZHAO X X, et al.Experimentation research on failure behavior of tungsten alloy penetrating low carbon steel plate at high velocity[J].Rare Metal Materials and Engineering, 2016, 45(1):122-126.(in Chinese) [24] 赵晓旭, 王树山, 徐豫新, 等.钨球高速侵彻低碳钢板成坑直径的计算模型[J].北京理工大学学报, 2015, 35(12):1217-1221. ZHAO X X, WANG S S, XU Y X, et al.Crater diameter calculation model of tungsten sphere impacting low carbon steel plate at high velocity[J]. Transaction of Beijing Institute of Technology, 2015, 35(12):1217-1221.(in Chinese)
|