[1] Guan Y J, Zhao G Q, Cheng G. FEA and testing studies on static camber performance of the radial tire[J]. Journal of Reinforced Plastics and Composites, 2007, 26(18): 1921-1936. [2] 臧利国, 赵又群, 姜成, 等. 机械弹性车轮径向刚度特性及影响因素研究[J]. 振动与冲击, 2015, 34(8): 181-186. ZANG Li-guo, ZHAO You-qun, JIANG Cheng, et al. Mechanical elastic wheel's radial stiffness characteristics and their influencing factors[J]. Journal of Vibration and Shock, 2015, 34(8):181-186. (in Chinese) [3] 佟金, 杨欣, 张伏, 等. 零压续跑轮胎技术现状与发展[J]. 农业机械学报, 2007, 38(3): 182-187. TONG Jin, YANG Xin, ZHANG Fu, et al. Development of run-flat tire technology[J]. Transactions of the Chinese Society for Agricultural Machinery, 2007, 38(3): 182-187. (in Chinese) [4] Wang Q, Zhao Y Q, Du X B, et al. Equivalent stiffness and dynamic response of new mechanical elastic wheel[J]. Journal of Vibroengineering, 2016, 18(1): 431-445. [5] 付宏勋, 赵又群, 林棻, 等. 胎圈结构参数对机械弹性车轮接地压力分布的影响[J]. 农业工程学报, 2015, 31(17): 57-64. FU Hong-xun, ZHAO You-qun, LIN Fen, et al. Influences of bead structure parameters on contact pressure distribution of mechanical elastic wheel[J]. Transactions of the Chinese Society of Agricultural Engineering, 2015, 31(17): 57-64. (in Chinese) [6] 石琴, 陈无畏, 洪洋, 等. 基于有限元理论的轮胎刚度特性的仿真研究[J]. 系统仿真学报, 2006,18(6): 1445-1449. SHI Qin, CHEN Wu-wei, HONG Yang, et al. The simulation of tire's stiffness characteristics using finite element model[J]. Journal of System Simulation, 2006, 18(6): 1445-1449.(in Chinese) [7] Kindt P, Sas P, Desmet W. Development and validation of a three-dimensional ring-based structural tyre model[J]. Journal of Sound and Vibration, 2009, 326: 852-869. [8] 卢荡, 郭孔辉. 轮胎侧偏力学特性的胎压影响分析及预测[J]. 吉林大学学报:工学版, 2011, 41(4): 915-920. LU Dang, GUO Kong-hui. Analysis and prediction of tire cornering property for diffenent inflation pressure[J]. Journal of Jilin University:Engineering and Technology Edition, 2011, 41(4): 915-920. (in Chinese) [9] Guan D H, Fan C J. Tire modeling for vertical properties including enveloping properties using experimental modal parameters[J]. Vehicle System Dynamics, 2003, 40(6): 419-433.
[10] Liu Y H, Li T, Yang Y Y, et al. Estimation of tire-road friction coefficient based on combined APF-IEKF and interation algorithm[J]. Mechanical Systems and Signal Processing, 2017, 88: 25-35. [11] Li J Q, Song Z Y, Wei Y T, et al. Influence of tire dynamics on slip ratio estimation of independent driving wheel system[J]. Chinese Journal of Mechanical Engineering, 2014, 27(6): 1203-1210. [12] Huang H B, Chiu Y J, Wang C, et al. Three-dimensional global pattern prediction for tyre tread wear[J]. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2015, 229(2): 197-213. [13] Ma B, Xu H G, Chen Y, et al. Evaluating the tire wear quantity and differences based on vehicle and road coupling method[J]. Advances in Mechanical Engineering, 2017, 9(5): 1-13. [14] Kim S, Kondo K, Akasaka T. Contact pressure distribution of radial tire in motion with camber angle[J]. Tire Science and Technology, 2000, 28(1): 2-32. [15] 危银涛, 沈筱亮. 轮胎稳态运动学与六分力预报I:理论与方法[J]. 机械工程学报, 2012,48(15): 65-74. WEI Yin-tao, SHEN Xiao-liang. Theory and method of tire rolling kinematics and prediction of tire forces and moments[J]. Journal of Mechanical Engineering, 2012, 48(15):65-74. (in Chinese) [16] 王国林, 董自龙, 梁晨, 等. 子午线轮胎接地特性与滚动阻力关系的研究[J]. 机械工程学报, 2014, 50(16): 186-192. WANG Guo-lin, DONG Zi-long, LIANG Chen, et al. Study on relationship between grounding characteristics and rolling resistance of radial tire[J]. Journal of Mechanical Engineering, 2014, 50(16): 186-192. (in Chinese) [17] 梁晨, 王国林, 周海超, 等. 子午线轮胎接地压力分布评价试验研究[J]. 汽车技术, 2013(11): 38-42. LIANG Chen, WANG Guo-lin, ZHOU Hai-chao, et al. Experimental study of radial tire contact pressure distribution evaluation[J]. Automobile Technology, 2013(11): 38-42. (in Chinese) [18] 王吉忠, 刘晓斌, 张泰, 等. 花纹磨光轮胎接地特性试验研究[J]. 农业机械学报, 2001, 32(2): 18-20. WANG Ji-zhong, LIU Xiao-bin, ZHANG Tai, et al. Experimental study of contact behavior of a bald tyre[J]. Transactions of the Chinese Society for Agricultural Machinery, 2001, 32(2): 18-20.(in Chinese) [19] 王强, 赵又群, 林棻, 等. 新型机械弹性车轮包容特性的力学研究[J]. 振动、测试与诊断, 2017, 37(2): 266-272. WANG Qiang, ZHAO You-qun, LIN Fen, et al. Mechanical study on enveloping characteristics for new mechanical elastic wheel[J]. Journal of Vibration, Measurement and Diagnosis, 2017, 37(2): 266-272. (in Chinese) [20] 黄建龙, 解广娟, 刘正伟. 基于Mooney-Rivlin模型和Yeoh模型的超弹性橡胶材料有限元分析[J]. 橡胶工业, 2008, 55(8): 467-471. HUANG Jian-long, XIE Guang-juan, LIU Zheng-wei. FEA of hyperelastic rubber material based on Mooney-Rivlin model and Yeoh model[J]. China Rubber Industry, 2008, 55(8): 467-471. (in Chinese)
第39卷 第3期2018 年3月兵工学报ACTA ARMAMENTARIIVol.39No.3Mar.2018
|