航空煤油活塞发动机空气辅助喷射系统喷雾特性试验研究

doi:10.3969/j.issn.1000-1093.2019.05.004

兵工学报 ›› 2019, Vol. 40 ›› Issue (5): 927-937.doi: 10.3969/j.issn.1000-1093.2019.05.004

航空煤油活塞发动机空气辅助喷射系统喷雾特性试验研究

高宏力¹, 张付军^1,2, 王苏飞¹, 武浩¹, 周磊³, 赵振峰¹, 刘波澜¹

（1.北京理工大学机械与车辆学院，北京 100081； 2.北京理工大学深圳研究院，广东深圳 518057；3.哈尔滨工业大学（深圳）机电工程与自动化学院，广东深圳 518055）

收稿日期:2018-07-26 修回日期:2018-07-26 上线日期:2019-07-26
通讯作者: 张付军（1966—），男，教授，博士生导师 E-mail:zfj123@bit.edu.cn
作者简介:高宏力（1987—），男，博士研究生。 E-mail: 407144234@qq.com
基金资助:
深圳市科技创新基金项目(JCYJ20170817114345260)

Experimental Study of Air-assisted Spray Characteristics of Aviation Kerosene Piston Engine

GAO Hongli¹, ZHANG Fujun^1,2, WANG Sufei¹, WU Hao¹, ZHOU Lei³, ZHAO Zhenfeng¹, LIU Bolan¹

(1.School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China; 2.Shenzhen Research Institute, Beijing Institute of Technology, Shenzhen 518057, Guangdong, China; 3.School of Mechanical Engineering and Automation, Harbin Institute of Technology, Shenzhen 518055, Guangdong, China)

Received:2018-07-26 Revised:2018-07-26 Online:2019-07-26

摘要/Abstract

摘要： 为获得良好的混合气体，保证喷雾特性与缸内时变环境之间的良好匹配，针对航空活塞二冲程煤油发动机空气辅助喷射系统的喷雾特性，开展了系统试验研究。使用高速相机和相位多普勒粒子分析仪并结合图像处理技术，分析了环境压力、温度和喷油脉宽、喷气脉宽等控制参数对喷雾宽度、贯穿距、空间扩散面积和索特平均值的影响。结果表明：控制参数不变情况下，提高环境压力不利于喷雾在空间的扩散，雾化效果也会变差；提高环境温度有利于燃油液滴的蒸发性、破碎；环境条件不变情况下，减小喷油脉宽、增大喷气脉宽有利于喷雾沿喷孔方向延伸，促进液滴膨胀破碎。

关键词: 航空煤油, 活塞发动机, 空气辅助喷射系统, 喷雾特性, 相位多普勒粒子分析仪, 索特平均值

Abstract: Based on the air-assisted spray characteristics of two-stroke aviation kerosene piston engine, the systemic experimental study was performed, and the effects of ambient pressure, temperature and control parameters，including fuel injection duration, interval among fuel and air, and air injection duration, on spray width, penetration, spatial diffusion area and Souter mean diameter were analyzed using a high-speed camera and a phase Doppler particle analyzer combining with image processing technology in order to obtain a desired gas mixture and ensure a good match between the spray characteristics and the time-varying environment of cylinder. The results show that the increased ambient pressure is not conducive to the spray spatial diffusion, while the atomization is worsen; and the increased ambient temperature is beneficial to the evaporation and breakup of fuel droplets in the case of constant control parameters; and the decreased or increased air injection duration facilitates the extension of spray along the direction of the nozzle, and promotes the expansion and breakup of droplets. The experimental results show that the air-assisted injection system has good adaptability. Key

Key words: aviationkerosene, pistonengine, air-assistedinjectionsystem, spaycharacteristic, phaseDopplerparticleanalyzer, Soutermeandiameter

中图分类号:

TK46⁺1

高宏力, 张付军, 王苏飞, 武浩, 周磊, 赵振峰, 刘波澜. 航空煤油活塞发动机空气辅助喷射系统喷雾特性试验研究[J]. 兵工学报, 2019, 40(5): 927-937.

GAO Hongli, ZHANG Fujun, WANG Sufei, WU Hao, ZHOU Lei, ZHAO Zhenfeng, LIU Bolan. Experimental Study of Air-assisted Spray Characteristics of Aviation Kerosene Piston Engine[J]. Acta Armamentarii, 2019, 40(5): 927-937.

参考文献

［1］ CHEN L F, DING S R, LIU H Y, et al. Comparative study of combustion and emissions of kerosene (RP-3), kerosene-pentanol blends and diesel in a compression ignition engine［J］. Applied Energy, 2017, 203:91-100.
［2］ PICKETT B M, BURNETTE P F, WELLS S P, et al. Fire safety tests comparing synthetic jet and diesel fuels with JP-8［J］. Fire Safety Journal, 2011, 46(3):89-95.
［3］王振宇, 丁水汀, 杜发荣. 航空重油发动机燃油供给系统动力学模型分析［J］.航空动力学报,2012, 27(4):846-853.
WANG Z Y, DING S T, DU F R. Analysis of dynamic modeling of aviation heavy oil piston engine fuel delivery system［J］.Journal of Aerospace Power,2012, 27(4):846-853. (in Chinese)
［4］莫胜钧. 小型航空点燃式重油活塞发动机点火及火焰传播特性的模拟研究［D］.北京：北京交通大学, 2012.
MO S J. Study of the ignition and flame propagation property of light-weight spark ignition, heavy oil aeroengine［D］. Beijing: Beijing Jiaotong University, 2012. (in Chinese)

［5］甘晓华. 航空燃气轮机燃油喷嘴技术［M］.北京：国防工业出版社, 2006.
GAN X H. Aero gas turbine engine fuel nozzle technology［M］.Beijing： National Defense Industry Press, 2006. (in Chinese)

［6］杨海青,陈茂杰,黄丽萍,等.夹气喷嘴瞬态喷雾的CFD仿真及试验［J］.航空动力学报, 2015, 30(12):2897-2903.
YANG H Q, CHEN M J, HUANG L P，et al.CFD simulation and experiment of transient spray for air-assisted injector［J］. Journal of Aerospace Power, 2015, 30(12):2897-2903. (in Chinese)
［7］白洪林, 胡春明, 李志军,等.空气喷射量对空气辅助喷射喷雾特性的影响［J］. 天津大学学报(自然科学与工程技术版), 2016, 49(2):206-212.
BAI H L, HU C M, LI Z J, et al. Effect of air injection quantity on spray characteristics of an air-assisted direct injector［J］. Journal of Tianjin University (Science and Technology),2016, 49(2): 206-212. (in Chinese)
［8］ LI Y F, ZHAO H, BROUZOS N, et al. Effect of injection timing on mixture and CAI combustion in a GDI engine with an air-assisted injector［C］∥Proceedings of 2006 SAE World Congress.Detroit,MI,US:SAE International, 2006.
［9］ GAYNOR J A, FLECK R, KENNY R G, et al. An investigation of air-assist injection timings and durations in a GDI CAI engine［C］∥Proceedings of JSAE/SAE International Fuels & Lubricants Meeting. Detroit,MI,US:SAE International, 2007:32895-32905.

［10］ MARTIN D, STRATMANN J, PISCHKE P, et al. Experimental investigation of the interaction of multiple GDI injections using laser diagnostics［C］∥Proceedings of SAE World Congress.Detroit,MI,US:SAE International, 2010:353-370.
［11］ LACOSTE J. Characteristics of diesel sprays at high temperatures and pressures［D］. Brighton，UK: University of Brighton, 2006.
［12］ LI Y F, GUO H J, MA X, et al. Droplet dynamics of DI spray from sub-atmospheric to elevated ambient pressure［J］. Fuel, 2016, 179(9):25-35.
［13］ DONG Q,LONG W,ISHIMA T, et al. Spray characteristics of V-type intersecting hole nozzles for diesel engines［J］. Fuel, 2013, 104(2):500-507.
［14］郭恒杰, 李雁飞, 徐宏明,等. 基于三维PDPA的旋流式GDI喷油器喷雾特性［J］. 内燃机学报, 2015, 33(4):335-341.
GUO H J, LI Y F, XU H M, et al. Spray characteristics of swirl-type GDI Injector using 3D-PDPA［J］. Transactions of CSICE, 2015, 33(4):335-341. (in Chinese)

［15］ XIONG S S, XU C S. Study on spark-ignition LPG engine by rapid compression-expansion machine to improve engine performance［J］. Transaction of CSICE, 2002, 20(1):41-45.
［16］王思奇, 杨海青. 航空重油发动机气助雾化喷嘴雾化机理仿真［J］. 内燃机学报, 2018, 36(2):127-135.
WANG S Q，YANG H Q. Simulation on atomization mechanism of air-assisted injector for aircraft heavy fuel engine［J］. Transactions of CSICE, 2018, 36(2):127-135. (in Chinese)
［17］姚春德, 耿培林, 银增辉,等. 喷嘴结构对喷雾特性的影响［J］. 内燃机学报, 2016, 34(1):41-47.
YAO C D，GENG P L，YIN Z H，et al. Effect of nozzle geometry on spray characteristic［J］. Transactions of CSICE, 2016, 34(1): 41-47. (in Chinese)

第40卷第5期
2019 年5月兵工学报ACTA
ARMAMENTARIIVol.40No.5May2019

[1]	张朔，赵振峰，董雪飞，叶莹. 二冲程航空活塞发动机增压匹配研究和优化[J]. 兵工学报, 2020, 41(1): 135-142.
[2]	赵文柱，王宪成，赵永东，孙志新，徐冬冬. 耦合内部流动的喷孔积碳对柴油机喷雾影响研究[J]. 兵工学报, 2018, 39(2): 217-223.
[3]	徐勤超，李善军，练永庆，王树宗. 新型大功率凸轮活塞发动机结构设计与试验[J]. 兵工学报, 2018, 39(10): 1979-1987.
[4]	王宪成，赵文柱，和穆，杨绍卿，徐冬冬. 柴油机喷油器喷孔积碳对喷雾影响研究[J]. 兵工学报, 2017, 38(2): 218-226.
[5]	吴维, 苑士华, 胡纪滨, 荆崇波. 液压自由活塞发动机止点位置控制研究[J]. 兵工学报, 2013, 34(5): 513-518.
[6]	吴维，苑士华，胡纪滨，荆崇波. 液压自由活塞发动机的活塞运动不对称特征研究[J]. 兵工学报, 2012, 33(7): 810-815.
[7]	吴维, 苑士华, 荆崇波, 郭凯. 液压自由活塞发动机工作过程仿真模型研究[J]. 兵工学报, 2011, 32(9): 1059-1064.
[8]	苑士华，吴维，荆崇波，郭凯，赵振峰. 单活塞式液压自由活塞柴油机启动过程研究[J]. 兵工学报, 2010, 31(8): 1009-1013.
[9]	邢志娜，王菊香，申刚，叶勇，刘洁. 两栖装甲车辆兴波阻力的计算及流场分析[J]. 兵工学报, 2010, 31(8): 1102-1105.
[10]	赵振峰，赵长祿，张付军. ー种新型混合.动カ系统：液压自由活塞发动机整体推进系统[J]. 兵工学报, 2009, 30(6): 773-778.

航空煤油活塞发动机空气辅助喷射系统喷雾特性试验研究

Experimental Study of Air-assisted Spray Characteristics of Aviation Kerosene Piston Engine

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 10

编辑推荐

Metrics

本文评价