头部非对称刻槽弹体侵彻混凝土目标性能研究

doi:10.3969/j.issn.1000-1093.2018.07.001

兵工学报 ›› 2018, Vol. 39 ›› Issue (7): 1249-1258.doi: 10.3969/j.issn.1000-1093.2018.07.001

头部非对称刻槽弹体侵彻混凝土目标性能研究

邓佳杰¹, 张先锋¹, 刘闯¹, 庞春旭², 王文杰¹

(1.南京理工大学机械工程学院，江苏南京 210094； 2.西安现代控制技术研究所，陕西西安 710065)

收稿日期:2017-11-13 修回日期:2017-11-13 上线日期:2018-08-24
通讯作者: 张先锋(1978—)，男，教授，博士生导师 E-mail:lynx@njust.edu.cn
作者简介:邓佳杰(1990—)，男，博士研究生。E-mail: jiajie_0827@163.com
基金资助:
国家青年拔尖人才支持计划项目(2014年)；国家自然科学基金委员会与中国工程物理研究院联合基金项目(U1730101)；武器装备预先研究项目（6140657010116BQ02001）

Research on Penetration of Asymmetrically Grooved Nose Projectile into Concrete Target

DENG Jia-jie¹, ZHANG Xian-feng¹, LIU Chuang¹, PANG Chun-xu², WANG Wen-jie¹

(1.School of Mechanical Engineering， Nanjing University of Science and Technology, Nanjing 210094， Jiangsu，China;2.Xi'an Modern Control Technology Research Institute, Xi'an 710065, Shaanxi, China)

Received:2017-11-13 Revised:2017-11-13 Online:2018-08-24

摘要/Abstract

摘要： 为进一步提高弹体对混凝土类脆性靶体的破坏能力，提出一种可对混凝土施加轴线压缩与切向剪切联合破坏作用的头部非对称刻槽弹体，并在极坐标下表征非圆截面头部弹体结构。利用准静态柱形空腔膨胀模型，建立轴向压缩-切向剪切联合作用下的准静态柱形空腔膨胀理论模型，推导得到考虑剪切效应的靶体响应力函数。在此基础上，发展了头部非对称刻槽弹体侵彻半无限厚混凝土目标局部相互作用模型。基于前述分析，开展了头部非对称刻槽弹体侵彻半无限混凝土目标系列试验研究。研究结果表明：考虑剪切效应的二维空腔膨胀理论及局部相互作用模型的理论计算结果与试验结果吻合较好；与普通尖卵形弹体相比较，头部非对称刻槽弹体具有较好的侵彻能力，能有效提高侵彻深度。

关键词: 头部非对称刻槽弹体, 混凝土目标, 侵彻深度, 空腔膨胀理论

Abstract: A projectile with asymmetrically grooved nose is proposed to further improve the penetration performance of projectile into concrete target. The projectile penetrates into target with passive rotation during the penetration. The asymmetrically grooved nose projectile is geometrically characterized under the polar coordinates. An extended quasi-static cylindrical cavity expansion model with tangential shear effect is constructed to estimate the normal stress on the surface of asymmetrically grooved-nose projectile by the quasi-static cylindrical cavity expansion model. The localized interaction models (LIMs) for the ultimate depth of penetration (DOP) of asymmetrically grooved nose projectile are derived based on the predicted normal stress. Comparative experiments of the asymmetrically grooved nose projectile and the ogive- nose projectile penetrating into semi-infinite concrete target are conducted. The analysis results prove that the LIM with extended quasi-static cylindrical cavity expansion model has a preferable estimating accuracy and is suitable for prediction of DOP of asymmetric groove-nose projectile. Compared with ogive-nose projectile, the asymmetrically grooved nose projectile has a better penetration performance.Key

Key words: asymmetricallygroovednoseprojectile, concretetarget, depthofpenetration, cavityexpansionmodel

中图分类号:

O385
TJ012.4

邓佳杰, 张先锋, 刘闯, 庞春旭, 王文杰. 头部非对称刻槽弹体侵彻混凝土目标性能研究[J]. 兵工学报, 2018, 39(7): 1249-1258.

DENG Jia-jie, ZHANG Xian-feng, LIU Chuang, PANG Chun-xu, WANG Wen-jie. Research on Penetration of Asymmetrically Grooved Nose Projectile into Concrete Target[J]. Acta Armamentarii, 2018, 39(7): 1249-1258.

参考文献

［1］ Yankelevsky D Z, Gluck J. Nose shape effect on high velocity soil penetration[J]. International Journal of Mechanical Sciences, 1980, 22(5): 297-311.
[2］刘坚成, 黄风雷, 皮爱国, 等. 异型头部弹体增强侵彻性能机理研究[J]. 爆炸与冲击, 2014, 34(4): 409-414.
LIU Jian-cheng, HUANG Feng-lei, PI Ai-guo, et al. On enhanced penetration performance of modified nose projectiles[J]. Explosion and Shock Waves, 2014, 34(4): 409-414. (in Chinese)
[3］ Liu J C, Pi A G, Huang F L. Research on penetration perfor- mance of double-ogive-nose projectiles[J]. International Journal of Impact Engineering, 2015, 84(10): 13-23.
[4］ Ben-Dor G, Dubinsky A, Elperin T. Applied high-speed plate penetration dynamics[M]. Netherlands: Springer, 2006.
[5］ Ben-Dor G, Dubinsky A, Elperin T. High-speed penetration modeling and shape optimization of the projectile penetrating into concrete shields[J]. Mechanics Based Design of Structures and Machines, 2009, 37(4): 538-549.
[6］ Mayersak J R. Kinetic energy cavity penetrator weapon: US, US20040231552[P]. 2003-05-23.
[7］柴传国. 异形头部弹体对混凝土靶的侵彻效应研究[D]. 北京:北京理工大学, 2014.
CHAI Chuan-guo. Study on the mechanism of penetration into concrete of nose headed projectile[D]. Beijing:Beijing Institute of Technology, 2014. (in Chinese)
[8］ Ragnedda F, Serra M. Optimum shape of high speed impactor for concrete targets using PSOA heuristic[J]. Engineering, 2010, 2(4): 257-262.
[9］ Yakunina G Y. The three-dimensional motion of optimal pyramidal bodies[J]. Journal of Applied Mathematics and Mechanics, 2005, 69(2): 234-243.

[10］ Yakunina G Y. Optimum three-dimensional hypersonic bodies within the framework of a local interaction model[C]∥International Space Planes and Hypersonic Systems and Technologies Conference. Kyoto, Japan: AIAA, 2001.
[11］ Yakunna G Y. Effects of sliding friction on the optimal 3D-nose geometry of rigid rods penetrating media[J]. Optimization and Engineering, 2005, 6(3): 315-338.
[12］范少博, 陈智刚, 侯秀成, 等. 旋进侵彻弹丸数值模拟与试验研究[J]. 弹箭与制导学报, 2013, 33(1): 80-83.
FAN Shao-bo, CHEN Zhi-gang, HOU Xiu-cheng, et al. Numerical simulation and experimental study on novel rotating penetration projectile[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2013, 33(1): 80-83. (in Chinese)
[13］ Erengil M E, Cargile D J. Advanced projectile concept for high speed penetration of concrete targets[C]∥Proceedings of the 20th International Symposium on Ballistics. Orlando, FL, US: International Ballistics Society, 2002.
[14］梁斌，陈小伟，姬永强，等. 先进钻地弹概念弹的次口径高速深侵彻实验研究[J].爆炸与冲击，2008, 28(1): 1-9.
LIANG Bin, CHEN Xiao-wei, JI Yong-qiang, et al. Experimental study on deep penetration of reduced-scale advanced earth penetrating weapon[J]. Explosion and Shock Waves, 2008, 28(1): 1-9.(in Chinese)
[15］ Wu H J, Wang Y N, Huang F L. Penetration concrete targets experiments with non-ideal & high velocity between 800 and 1 100 m/s[J]. International Journal of Modern Physics B, 2008, 22(9/10/11): 1087-1093.
[16］ He L L, Chen X W, Wang Z H. Study on the penetration performance of concept projectile for high-speed penetration (CPHP)[J]. International Journal of Impact Engineering, 2016, 94: 1-12.
[17］ Zhang S, Wu H J, Zhang X X, et al. High-velocity penetration of concrete targets with three types of projectiles: experiments and analysis[J]. Latin American Journal of Solids and Structures, 2017, 14(9): 1614-1628.
[18］庞春旭, 何勇, 沈晓军, 等. 刻槽弹体旋转侵彻铝靶试验与数值模拟[J]. 弹道学报, 2015, 27(1): 70-75.
PANG Chun-xu, HE Yong, SHEN Xiao-jun, et al. Experimental investigation and numerical simulation on grooved projectile rotationally penetrating into aluminum target[J]. Journal of Ballistics, 2015, 27(1): 70-75. (in Chinese)
[19］庞春旭, 何勇, 沈晓军, 等. 刻槽弹体旋转侵彻混凝土效应试验研究[J]. 兵工学报, 2015, 36(1): 46-52.
PANG Chun-xu, HE Yong, SHEN Xiao-jun, et al. Experimental investigation on penetration of grooved projectiles into concrete targets[J]. Acta Armamentarii, 2015, 36(1): 46-52. (in Chinese)
[20］ Forrestal M J, Altman B S, Cargile J D, et al. An empirical equation for penetration depth of ogive-nose projectiles into concrete targets[J]. International Journal of Impact Engineering, 1994, 15(4): 395-405.
[21］ Chen X W, Fan S C, Li Q M. Oblique and normal perforation of concrete targets by a rigid projectile[J]. International Journal of Impact Engineering, 2004, 30(6): 617-637.
[22］ Li Q M, Chen X W. Dimensionless formulae for penetration depth of concrete target impacted by a non-deformable projectile[J]. International Journal of Impact Engineering, 2003, 28(1): 93-116.

第39卷
第7期2018 年7月兵工学报ACTA
ARMAMENTARIIVol.39No.7Jul.2018

[1]	贾鑫，黄正祥，徐梦雯，肖强强. 聚能射流对厚壁移动靶的侵彻理论与数值模拟分析[J]. 兵工学报, 2019, 40(8): 1553-1561.
[2]	张雪岩，武海军，李金柱，皮爱国，黄风雷. 弹体高速侵彻两种强度混凝土靶的对比研究[J]. 兵工学报, 2019, 40(2): 276-283.
[3]	聂源，蒋建伟，王树有，刘瀚. 爆炸反应装甲对爆炸成型弹丸侵彻效应影响的实验研究[J]. 兵工学报, 2018, 39(8): 1576-1581.
[4]	张爽，武海军，黄风雷. 刚性弹正侵彻钢筋混凝土靶阻力模型[J]. 兵工学报, 2017, 38(11): 2081-2092.
[5]	张欣欣，闫雷，武海军，黄风雷. 考虑剪胀效应的混凝土动态球形空腔膨胀理论[J]. 兵工学报, 2016, 37(1): 42-49.
[6]	孔祥振，方秦，吴昊. 考虑靶体自由表面和开裂区影响的可变形弹体斜侵彻脆性材料的终点弹道分析[J]. 兵工学报, 2014, 35(6): 814-821.
[7]	郭锦炎，阮文俊，王浩，张丁山. 助推弹体对混凝土目标侵彻过程的计算方法研究[J]. 兵工学报, 2012, 33(9): 1076-1080.
[8]	张德志，林俊德，唐润棣，张向荣. 高强度岩石侵彻经验公式[J]. 兵工学报, 2006, 27(1): 15-18.
[9]	王斌，金丰年，徐迎，徐汉中. 吸能因子在计算弹体侵彻钢纤维混凝土深度中的应用[J]. 兵工学报, 2005, 26(4): 477-480.
[10]	魏雪英，俞茂宏. 钨杆弹高速侵彻陶瓷靶的理论分析[J]. 兵工学报, 2002, 23(2): 167-170.
[11]	王明洋,刘小斌,钱七虎. 弹体在含钢球的钢纤维混凝土介质中侵彻深度工程计算模型[J]. 兵工学报, 2002, 23(1): 14-18.
[12]	张瑞萍. 弹箭侵彻器对土壌和岩石的侵彻机理研究及弹道计算[J]. 兵工学报, 1997, 18(3): 212-216.

头部非对称刻槽弹体侵彻混凝土目标性能研究

Research on Penetration of Asymmetrically Grooved Nose Projectile into Concrete Target

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 12

编辑推荐

Metrics

本文评价