车辆馈能悬挂系统滑模控制及能量管理策略研究

doi:10.3969/j.issn.1000-1093.2016.12.002

摘要/Abstract

摘要： 针对车辆传统主动悬挂系统高能耗的问题，以半车为研究对象，建立了一种4自由度馈能式悬挂系统；为解决馈能式减振器主动控制与能量回收不能并存的问题，设计了一种新型馈能式减振器，采用其力发生器进行主动控制，同时可用其馈能器回收能量。依据车辆典型行驶条件给出了基于控制执行率的车辆悬挂系统能量管理策略，以综合考虑馈能式悬挂系统的振动控制与能量回收。仿真分析与实车试验分析表明：与被动悬挂系统相比，所建立的基于滑模控制的馈能式悬挂系统的综合性能改善了22.7%，说明了该馈能式悬挂系统振动控制的有效性；依据行驶路面及行驶速度划分3种典型车辆行驶条件可以用来作为控制执行率实施大小的判别条件。

关键词: 兵器科学与技术, 馈能悬挂, 馈能式减振器, 滑模控制, 能量回收特性, 能量管理策略

Abstract: To solve the high energy consumption of standard active suspension system of vehicle, a 4 DOF energy-regenerative suspension system is established by taking the half-car as research object. A new energy-regenerative absorber, which has an actuator for active controlling and an energy-regenerator for energy harvesting, is designed to solve the problem of enabling to implement the active control and energy harvesting of energy-regenerative absorber at the same time. An energy management strategy based on the performing rate of active control is given according to the running conditions of vehicle. The simulated and experimental results show that, in comparison to the passive suspension, the comprehensive performance of the established energy-regenerative suspension with sliding mode control algorithm is improved by 22.700%, which indicates that the vibration control of the energy-regenerative suspension with sliding mode control is effective; 3 kinds of typical running condition, which are distinguished by road level and running speed, could be used as the criteria of the performing rate of active control.

Key words: ordnance science and technology, energy-regenerative suspension, energy-regenerative absorber, sliding mode control, energy harvesting performance, energy management strategy

中图分类号:

U463.33⁺1

黄大山，张进秋，刘义乐，张建. 车辆馈能悬挂系统滑模控制及能量管理策略研究[J]. 兵工学报, 2016, 37(12): 2185-2195.

HUANG Da-shan, ZHANG Jin-qiu, LIU Yi-le, ZHANG Jian. Research on Sliding Mode Control and Energy Management Strategy of Energy-regenerative Suspension System of Vehicle[J]. Acta Armamentarii, 2016, 37(12): 2185-2195.

参考文献

［1］ Kaleemullah M, Faris W F, Rashid M M, et al. Comparative analysis of LQR and robust controller for active suspension［J］. International Journal of Vehicle Noise and Vibration, 2012, 8(4): 367-386.
［2］ Singal K, Rajamani R. Zero-energy active suspension system for automobiles with adaptive sky-hook damping［J］. Journal of Vibration and Acoustics, 2013, 135(1): 1-9.
［3］张孝祖, 李辉, 蔡双飞. 四轮转向车辆H₂/H_∞混合鲁棒控制与仿真［J］. 农业机械学报, 2008, 39(8): 14-17.
ZHANG Xiao-zu, LI Hui, CAI Shuang-fei. H₂/H_∞ mixed robust control and simulation for 4WS vehicle［J］. Transactions of the Chinese Society for Agricultural Machinery, 2008, 39(8): 14-17. (in Chinese)
［4］ Karnopp D. Power requirement for traversing uneven roadways［J］. Vehicle System Dynamics, 1978, 7(3): 135-152.
［5］ Nakano K, Suda Y, Nakadai S, et al. Self-powered active control applied to a truck cab suspension［J］. JSAE Review, 1999, 20(4): 511-516.
［6］ Jones W D. Easy ride: Bose corp. uses speaker technology to give cars adaptive suspension［J］. IEEE Spectrum, 2005, 42(5): 12-14.
［7］黄昆, 喻凡, 张勇超. 基于能量流动分析的电磁式馈能型主动悬架控制［J］. 上海交通大学学报, 2011, 45(7): 1068-1073.
HUANG Kun, YU Fan, ZHANG Yong-chao. Active control of energy-regenerative electromagnetic suspension based on energy flow analysis［J］. Journal of Shanghai Jiao Tong University, 2011, 45(7): 1068-1073. (in Chinese)
［8］于长淼, 王伟华, 王庆年. 馈能悬架阻尼特性及其影响因素［J］. 吉林大学学报:工学版, 2010, 40(6): 1482-1486.
YU Chang-miao, WANG Wei-hua, WANG Qing-nian. Damping characteristic and its influence factors in energy regenerative suspension［J］. Journal of Jilin University :Engineering and Technology Edition, 2010, 40(6): 1482-1486. (in Chinese)
［9］方志刚. 汽车液电馈能式减振器馈能理论及阻尼特性研究［D］. 武汉: 武汉理工大学, 2013: 17-26.
FANG Zhi-gang. Energy recovery theory and damping characteristic research of vehicle hydraulic electromagnetic shock absorber［D］. Wuhan: Wuhan University of Technology, 2013: 17-26. (in Chinese)
［10］ Jolly M R, Margolis D L. Regenerative systems for vibration control［J］. Journal of Vibration and Acoustics, 1997, 199(2): 208-215.
［11］ Levant Power Corporation. Integrated valve(Activalve) ［EB/OL］. ［2016-04-20］. http:∥www.levantpower.com.
［12］ David S B, Bobrovsky B Z. Actively controlled vehicle suspension with energy regeneration capabilities［J］. Vehicle System Dyanmics, 2011, 49(6): 833-854.
［13］王国林, 胡蛟, 钱金戈, 等. 路面对汽车非平稳激励的时域仿真及小波分析［J］. 振动与冲击, 2010, 29(7): 28-32.
WANG Guo-lin, HU Jiao, QIAN Jin-ge, et al. Simulation in time domain for nonstationary road disturbances and its wavelet analysis［J］. Journal of Vibration and Shock, 2010, 29(7): 28-32. (in Chinese)
［14］楼少敏, 付振, 许沧粟. 基于滑模理论的半主动悬架控制［J］. 汽车工程, 2010, 32(5): 434-438.
LOU Shao-min, FU Zhen, XU Cang-su. Semi-active suspension control based on sliding mode theory［J］. Automotive Engineering, 2010, 32(5): 434-438. (in Chinese)
［15］陈云微, 赵强. 车辆半主动座椅悬架滑模变结构控制［J］. 哈尔滨工程大学学报, 2012, 33(6): 775-781.
CHEN Yun-wei, ZHAO Qiang. Sliding mode variable structure control for semi-active seat suspension in vehicles［J］. Journal of Harbin Engineering University, 2012, 33(6): 775-781. (in Chinese)
［16］ Huang D S, Zhang J Q, Liu Y L. Performance of a novel energy-regenerative active suspension system［J］. Journal of Chongqing University：English Edition, 2015, 14(3): 109-118.
［17］黄大山, 张进秋, 刘义乐, 等. 复合式馈能悬挂能量回收特性分析［J］. 装甲兵工程学院学报, 2015, 29(2): 40-46.
HUANG Da-shan, ZHANG Jin-qiu, LIU Yi-le, et al. Analysis of energy recovery features of complex energy-regenerative suspension system［J］. Journal of Academy of Armored Force Engineering, 2015, 29(2): 40-46.(in Chinese)
［18］余志生. 汽车理论［M］. 北京：机械工业出版社，2009.
YU Zhi-sheng. Theory of automobile［M］. Beijing: China Machine Press, 2009. (in Chinese)
［19］赵云堂, 陈思忠, 冯占宗, 等. 磁流变半主动悬架的天棚控制方法研究［J］. 汽车工程学报, 2011, 1(2): 127-133.
ZHAO Yun-tang, CHEN Si-zhong, FENG Zhan-zong, et al. Study on the dynamic simulation of magneto-rehological semi-active suspension using sky-hook control method［J］. Chinese Journal of Automotive Engineering, 2011, 1(2): 127-133. (in Chinese)
［20］吴志成, 陈思忠, 杨林, 等. 越野车辆平顺性评价方法研究［J］. 兵工学报, 2007, 28(11): 1393-1396.
WU Zhi-cheng, CHEN Si-zhong, YANG Lin, et al. Research on objective evaluation criterion for ride comfort of off-road vehicles［J］. Acta Armamentarii, 2007, 28(11): 1393-1396. (in Chinese)

[1]	陈路明，廖自力，马晓军，刘春光. 基于分层控制的混合动力车辆实时能量管理策略[J]. 兵工学报, 2021, 42(8): 1580-1591.
[2]	邹渊，张彬，张旭东，赵志颖，康铁宇，郭玉枫，吴喆. 基于归一化优势函数的强化学习混合动力履带车辆能量管理[J]. 兵工学报, 2021, 42(10): 2159-2169.
[3]	陈路明，廖自力，张征. 基于路面自适应的多轮轮毂电机驱动车辆驱动防滑控制[J]. 兵工学报, 2021, 42(10): 2278-2290.
[4]	聂守成，钱林方，陈志群，卫俞凯，尹强. 基于干扰观测器的弹丸协调器电液伺服系统自适应滑模控制[J]. 兵工学报, 2020, 41(9): 1745-1751.
[5]	陈升富，常思江，吴放. 带有视场角约束的滑模攻击时间控制制导律[J]. 兵工学报, 2019, 40(4): 777-787.
[6]	王斌锐，靳明涛，沈国阳，金英连，陈迪剑. 气动肌肉肘关节的滑模内环导纳控制设计[J]. 兵工学报, 2018, 39(6): 1233-1238.
[7]	娄伟鹏，郑长松，李和言，陈建文，张周立，马源. 高速《Symbol》v湿式换挡离合器排油阀临界开启和关闭压力研究[J]. 兵工学报, 2017, 38(9): 1665-1672.
[8]	王宪成，杨绍卿，马宁，赵文柱. 车辆柴油机缸套动载荷磨损计算模型研究[J]. 兵工学报, 2017, 38(9): 1673-1680.
[9]	孙皓泽，常天庆，王全东，孔德鹏，戴文君. 一种基于分层多尺度卷积特征提取的坦克装甲目标图像检测方法[J]. 兵工学报, 2017, 38(9): 1681-1691.
[10]	张玉燕，孙莎莎，王振春，曹海要，战再吉. 高速载流电枢表面瞬态温度场仿真与测量[J]. 兵工学报, 2017, 38(9): 1692-1698.
[11]	李臣明，宦超，石怀龙. 某箱式火箭炮对面目标分布式杀伤最优火力分配[J]. 兵工学报, 2017, 38(9): 1699-1704.
[12]	雷娟棉，张嘉炜，谭朝明. 小攻角下船尾外形对旋转弹丸马格努斯效应影响的数值研究[J]. 兵工学报, 2017, 38(9): 1705-1715.
[13]	李泽，闫晓鹏，栗苹，郝新红，王建涛. 扫频式干扰对调频多普勒引信的干扰机理研究[J]. 兵工学报, 2017, 38(9): 1716-1722.
[14]	张浩为，谢军伟，张昭建，宗彬锋，陈唐军. 基于混合自适应遗传算法的相控阵雷达任务调度[J]. 兵工学报, 2017, 38(9): 1761-1770.
[15]	李茂，侯海量，朱锡，黄晓明，李典，陈长海，胡年明. 结构间隙对芳纶纤维增强复合装甲结构抗侵彻性能的影响[J]. 兵工学报, 2017, 38(9): 1797-1805.