基于高速数字图像相关法的疲劳裂纹尖端位移应变场变化规律研究

doi:10.3969/j.issn.1000-1093.2015.09.024

摘要/Abstract

摘要： 应用高速摄像数字图像相关法研究了谐振式疲劳裂纹扩展试验中紧凑拉伸（CT）试件在高频正弦交变载荷作用下，裂纹稳态扩展阶段裂纹尖端区域位移和应变场的变化规律。采用数字化高速摄影设备采集系列正弦交变载荷作用下CT试件数字散斑图像，应用数字图像相关(DIC)法计算每幅图像裂纹尖端区域位移和应变场，对裂纹尖端区域特征点的位移、应变值采用最小二乘正弦拟合方法进行拟合，求出振幅、相位、平均载荷等特征量，将拟合出的应变或位移正弦曲线和所对应的系列散斑图像进行匹配，找到一个应力循环内特征位置的图像。使用动态高精度应变仪测量了CT试件在一个应力循环内裂纹尖端点应变值，试验结果表明，DIC应变测量最大误差为4.12%，验证了所提出DIC测量方法的可行性。在此基础上，进行了基于高速DIC方法的谐振式疲劳裂纹扩展试验，研究了疲劳裂纹未扩展时裂纹尖端应变幅值和疲劳循环次数的关系及疲劳裂纹扩展到不同长度时裂纹尖端区域位移和应变场的变化规律。

关键词: 仪器仪表技术, 数字图像相关, 高速摄像, 疲劳裂纹, 位移场, 应变场, 高频谐振载荷

Abstract: In order to research the variation laws of displacement and strain fields on the fatigue crack tip area of the compact tension（CT）specimen in the stage of steady crack propagation under high frequency sinusoidal alternating load, a method based on the digital image correlation (DIC) and digital high-speed photography technology is proposed. A series of digital speckle images of CT specimen under sinusoidal alternating load are collected by digital high-speed photographic equipment, and the displacement and strain fields on the crack tip in each image are calculated by DIC. The sinusoidal changing strain curve of the feature point on the fatigue crack tip area is obtained by the least square sine wave fitting method, and the characteristic parameters of sinusoidal strain, such as amplitude, frequency, phase and mean load, are calculated. The images of characteristic position in a stress cycle are obtained by comparing the fitted sine curve of strain with the corresponding speckle images. Then the strain values at the tip of CT specimen during one stress cycle are measured by dynamic strain gauge. The results show that the maximum measurement error of strain by DIC method is 4.12% . On this basis, the resonant fatigue crack propagation test is carried out based on the high-speed photography and digital image correlation method, the relationship between strain amplitude values at crack tip and fatigue cycle number before the fatigue crack extension, and the variation laws of displacement and strain fields on crack tip area with the different lengths of fatigue crack are studied.

Key words: apparatus and intruments technology, digital image correlation, high-speed photography, fatigue crack, displacement field, strain field, high frequency resonant loading

中图分类号:

高红俐，刘欢，齐子诚，刘辉，郑欢斌. 基于高速数字图像相关法的疲劳裂纹尖端位移应变场变化规律研究[J]. 兵工学报, 2015, 36(9): 1772-1781.

GAO Hong-li， LIU Huan， QI Zi-cheng, LIU Hui， ZHENG Huan-bin. Research on Variation Law of Fatigue Crack-tip Displacement and Strain Fields Based on High-speed Digital Image CorrelationMethod[J]. Acta Armamentarii, 2015, 36(9): 1772-1781.

参考文献

［1］ Ravikumar V, Clare M. Compliance calibration for fatigue crack propagation testing of ultra high molecular weight polyethylene[J]. Biomaterials, 2006,27(27): 4693-4697.
[2] 全国钢标准化技术委员会. GB/T 6398—2000金属材料疲劳裂纹扩展速率试验方法[S]. 北京：国家质量技术监督局,2001.
The National Steel Standardization Technical Committee. GB/T 6398—2000 Standard test method for fatigue crack growth rates of metallic materials[S]. Beijing: State Bureau of Quality and Technical Supervision, 2001. (in Chinese)
[3] Gao H L, Shen S S, Yun Y. Fatigue crack length real time measurement method based on camera automatically tracking and positioning[J]. Applied Mechanics and Materials, 2012, 134:3111-3118.
[4] 高红俐，张立彬，姜伟,等．电磁谐振式疲劳裂纹扩展试验固有频率跟踪系统[J]．兵工学报，2013，34(7):896-903.
GAO Hong-li, ZHANG Li-bin, JIANG Wei, et al. Nature frequency tracking system of the electro magnetic resonance fatigue crack propagation test[J]. Acta Armamentarii, 2013,34(7):896-903. (in Chinese)
[5] Walcker A, Weygand D, Kraft O. Inertial effects on dislocation damping under cyclic loading with ultra-high frequencies[J]. Materials Science and Engineering, 2005,400:397-400.
[6] Alireza V A, Aref T, Sia N N. Stress-wave energy management through material anisotropy[J]. Wave Motion,2010, 47(8):519-536.
[7] Rahul G, Kulkarni M D, Pandya K S, et al. Stress wave micro-macro attenuation in ceramic plates made of tiles during ballistic impact[J]. International Journal of Mechanical Sciences, 2014, 83:30-37.
[8] Yamaguchi I. Speckle displacement and deformation in the diffraction and image fields for small object deformation[J]. Acta Optica Sinica, 1981, 28(10): 1359-1376.
[9] Peters W H, Ranson W F. Digital imaging technique in experimental mechanics[J]. Optical Engineering, 1982, 21 (5): 427-431.
[10] Kulkarni R, Gorthi S S, Rastogi P. Measurement of in-plane and out-of-plane displacements and strains using digital holographic Moiré[J]. Journal of Modern Optics, 2014,61(9):755-762.
[11] Fellows L J, Nowell D. Measurement of crack closure after the application of an overload cycle, using Moiré interferometry[J]. International Journal of Fatigue, 2005, 27(10/11/12): 1453-1462.
[12] Matham M V, Sujatha N. Digital speckle pattern interferometry for deformation analysis of inner surfaces of cylindrical specimens [J]. Applied Optics, 2004, 43(12): 2400-2408.
[13] Dai X J, Pu Q, Wang L M, et al. Measurement on fracture process and prediction of the load capacity of steel fiber reinforced concrete by electronic speckle pattern interferometry[J]. Composites Part B: Engineering, 2011,42(5):1181-1188.
[14] Bedsole R, Tippur H V. Dynamic fracture characterization of small specimens: a study of loading rate effects on acrylic and acrylic bone cement[J]. Journal of Engineering Materials and Technology-Transactions of the ASME, 2013,135(3): 031001.
[15] Periasamy C, Tippur H V. Measurement of crack-tip and punch-tip transient deformations and stress intensity factors using digital gradient sensing technique[J]. Engineering Fracture Mechanics,2013,98: 185-199.
[16] Vanlanduit S, Vanherzeele J, Longo R, et al. A digital image correlation method for fatigue test experiments[J]. Optics and Lasers in Engineering, 2009,47(3/4): 371-378.
[17] Poncelet M, Barbier G, Raka B, et al. Biaxial high cycle fatigue of a type 304 L stainless steel:cyclic strains and crack initiation detection by digital image correlation[J]. European Journal of Mechanics A/Solids, 2010, 29:810-825.
[18] Pan B, Qian K M, Xie H M, et al. Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review[J]. Measurement Science and Technology, 2009, 20(6): 20.062001.
[19] Pan B. Reliability-guided digital image correlation for image deformation measurement[J]. Applied Optics, 2009,48(8): 1535-1542.
[20] Chakraborty D，Murthy K S R K，Chakraborty D, et al．A new single strain gage technique for the accurate determination of mode I stress intensity factor in orthotropic composite materials[J]. Engineering Fracture Mechanics, 2014,124:142-154.
[21] 周见行，高红俐，齐子诚，等. 基于摄像头自动跟踪定位的疲劳裂纹在线测量方法研究[J]. 中国机械工程, 2011,22(11): 1302-1306．
ZHOU Jian-xing, GAO Hong-li, QI Zi-cheng, et al. Study on on-line measurement method of fatigue crack length based on camera automatically tracking and positioning[J]. China Mechanical Engineering,2011, 22(11): 1302-1306. (in Chinese)

[1]	师军飞，钱林方，陈光宋，尹强，刘道坤，李仲刚. 基于数字图像相关原理的埋头弹程序燃烧特性试验研究[J]. 兵工学报, 2024, 45(4): 1047-1059.
[2]	黄心畏，单晓锋，高红俐，王晨. 基于边缘检测和数字图像相关法的疲劳裂纹长度测量方法[J]. 兵工学报, 2022, 43(4): 940-951.
[3]	温垚珂，郑浩，张俊斌，闫文敏，刘飞. 基于三维数字图像相关技术的防弹衣性能测试与评估[J]. 兵工学报, 2021, 42(6): 1121-1127.
[4]	刘计划，赵宏立，何昌辉，靳建伟，张邹邹，王琼林，赵宝明. 冲击载荷作用下典型发射药的弹性模量分析方法[J]. 兵工学报, 2021, 42(2): 289-296.
[5]	伍鹏，李高春，韩永恒，赵汝岩，谭洁，刘著卿. 固体火箭发动机矩形粘接试件多角度拉伸过程变形测量与破坏模式[J]. 兵工学报, 2020, 41(11): 2234-2242.
[6]	刘坚成，张雷雷，徐坤，皮爱国，史文卿，黄风雷. 反弹道非正侵彻的弹体结构响应实验研究[J]. 兵工学报, 2019, 40(9): 1797-1803.
[7]	王阳，李高春，伍鹏，杨明，韩永恒. 基于数字图像相关方法的端羟基聚丁二烯推进剂复合型裂纹J积分测量[J]. 兵工学报, 2019, 40(2): 284-291.
[8]	李佳川，魏英杰，王聪，杜严锋. 膜态沸腾阶段球体入水空泡及流体动力特性[J]. 兵工学报, 2018, 39(8): 1548-1555.
[9]	崔云霄，陈鹏万，郭保桥， David A. Cendón，周忠彬. 基于内聚裂纹模型的高聚物粘结炸药模拟材料动态断裂行为研究[J]. 兵工学报, 2017, 38(12): 2379-2385.
[10]	周刚毅，董新龙，付应乾. 动态帽型剪切试样分析及实验验证[J]. 兵工学报, 2017, 38(12): 2455-2462.
[11]	杨丽君，田洪刚，安立明，温银堂，罗小元. 基于同面电容成像的航天隔热复合材料粘接缺陷检测方法[J]. 兵工学报, 2017, 38(12): 2488-2496.
[12]	刘坚成，皮爱国，黄风雷. 反弹道斜撞击下自由梁结构响应研究[J]. 兵工学报, 2017, 38(11): 2117-2125.
[13]	唐晨，张茂云，曹国华，丁红昌. 基于互相关的大型机组轴系激光对中微弱信号提取方法研究[J]. 兵工学报, 2017, 38(10): 2048-2054.
[14]	崔云霄，陈鹏万， David A. Cendón，戴开达，钟方平. 基于内聚裂纹模型的高聚物粘结炸药模拟材料动态巴西实验的数值模拟[J]. 兵工学报, 2016, 37(9): 1639-1645.
[15]	王宝元，邵小军，刘朋科，衡刚，钞红晓，刘军. 基于高速摄像弹道跟踪原理的弹丸章动角测试方法[J]. 兵工学报, 2016, 37(7): 1312-1316.