欢迎访问《兵工学报》官方网站,今天是 分享到:

兵工学报 ›› 2023, Vol. 44 ›› Issue (S1): 132-137.doi: 10.12382/bgxb.2023.0932

• • 上一篇    下一篇

一种双面感压式光纤土压力传感器

周会娟*(), 余尚江, 陈晋央, 陈显, 孟晓洁   

  1. 军事科学院 国防工程研究院, 河南 洛阳 471023
  • 收稿日期:2023-09-14 上线日期:2023-12-08
  • 通讯作者:

An Optical Fiber Soil Pressure Sensor with Double Sensitive Surfaces

ZHOU Huijuan*(), YU Shangjiang, CHEN Jinyang, CHEN Xian, MENG Xiaojie   

  1. Defense Engineering Institute, AMS, PLA, Luoyang 471023, Henan, China
  • Received:2023-09-14 Online:2023-12-08

摘要:

针对现有的光纤光栅式土压力传感器易因光栅受力不均匀而导致光栅反射谱展宽甚至出现啁啾而降低测量精度等问题,基于菱形金属框架结构和金属化光纤光栅设计制作了一种双面感压式土压力传感器,将光纤光栅直接焊接固定在菱形金属结构对角线的两端,通过菱形金属结构将外界压力放大后作用于光栅两端,使得光栅栅区始终处于悬空且均匀受力状态,避免了光栅受力不均匀导致的光谱展宽及啁啾现象,采用焊接工艺避免了胶粘带来的蠕变、老化、失效等问题,保证了传感器较高的测量精度和较好的长期稳定性。理论分析和实验结果表明,研制的光纤式土压力传感器波长-压力灵敏度系数约为624pm/MPa,量程为3.5MPa。

关键词: 土压力传感器, 光纤光栅, 菱形金属结构, 双面感压

Abstract:

The existing fiber Bragg grating (FBG) soil-pressure sensors are prone to cause the broadening or even chirping of reflection spectrum due to the uneven stress of FBG, which reduces the measurement accuracy. A soil pressure sensor with double sensitive surfaces is designed and fabricated based on a diamond metal frame and a metalized FBG. The FBG is directly welded and fixed at both ends of the diagonal of diamond metal structure. The external pressure is applied to both ends of the grating after it is amplified by the diamond metal structure, so that the FBG is always suspended and tensioned with uniform stress. Therefore, the reflection spectrum broadening and chirping caused by uneven force on the FBG are avoided. The welding process is used to avoid the problems of creep, aging and failure caused by adhesive, and the high measuring accuracy and long-term stability of the sensor are improved. The analyzed and experimental results show that the wavelength-pressure sensitivity coefficient of the FBG soil pressure sensor is 624pm/MPa and the measuring range is 3.5MPa.

Key words: soil pressure sensor, fiber Bragg grating, diamond metal structure, double-sided pressure sensing

中图分类号: