[1] ORPHAL D L, MILLER C W. Penetration performance of non-ideal segmented rods[J]. International Journal of Impact Engineering, 1991,11(4):457-461. [2] WANG X M,ZHAO G Z,SHEN P H,et al. High velocity impact of segmented rods with analuminum carrier tube[J]. International Journal of Impact Engineering, 1995,17(4/5/6): 915-923. [3] 郎林, 陈小伟, 雷劲松.长杆和分段杆侵彻的数值模拟[J]. 爆炸与冲击, 2011, 31(2):127-134. LANG L, CHEN X W, LEI J S. Numerical simulations on long rod and segmented rods penetrating into steel targets[J]. Explosion and Shock Waves, 2011, 31(2): 127-134. (in Chinese) [4] CUADROS J H. Monolithic and segmented projectile penetration experiments in the 2 to 4 kilometers per second impact velocity regime[J]. International Journal of Impact Engineering, 1990, 10(1): 147-157. [5] SORENSEN B R, KIMSEY K D, SILSBY G F, et al. High velocity penetration of steel targets[J]. International Journal of Impact Engineering, 1991, 11(1): 107-119. [6] FRANZEN J D. An upper limit for the penetration performance of segmented rods with segment l/d≤1[J]. International Journal of Impact Engineering, 1994, 15(5): 661-668. [7] NORMANDIA M J,LEE M Y. Penetration performance of multiple segmentedrods at 2.6 km/s[J]. International Journal of Impact Engineering,1999, 23(1): 675-686. [8] TATE A. Engineering modelling of some aspects of segmented rod penetration[J].International Journal of Impact Engineering, 1990, 9(3):327-341. [9] LITTLEFIELD D L. Effect of alignment on the penetration of segmented rods[J].International Journal of Impact Engineering, 2001, 26(1):421-431. [10] LEE M.A numerical comparison of the ballistic performance of unitary rod and segmented-rods against stationary and moving oblique plates[J]. International Journal of Impact Engineering, 2001, 26(1): 399-407. [11] JO J H,LEE Y S,KIM J H,et al.Study of hypervelocity penetration characteristics of segmented tungsten penetrator[J]. Transactions of the Korean Society of Mechanical Engineers, 2013, 36(8):953-960. (in Korean) [12] HU J, DENG Y F,MENG F Z,et al. Numerical investigation on penetration performance of segmented rods[J].Chinese Journal of High Pressure Physics,2015, 29(6):410-418. [13] 邓云飞, 张伟, 曹宗胜, 等.分段弹侵彻效率的数值模拟研究[J].高压物理学报, 2011, 25(3): 251-260. DENG Y F,ZHANG W,CAO Z S,et al.Numerical investigation of penetration performance of segmented penetration into steel target[J]. Chinese Journal of High Pressure Physics,2011, 25(3): 251-260. (in Chinese) [14] CAO Z S, DENG Y F, ZHANG W. Numerical investigation of penetration performance of segmented rod projectiles with various connectors[J]. Key Engineering Materials, 2010, 452/453: 185-188. [15] 蒋建伟,卢永刚,门建兵,等.理想分段杆侵彻效能的数值模拟研究[J]. 弹箭与制导学报,2001,21(2): 23-26. JIANG J W,LU Y G,MEN J B,et al.The numerical simulation of penetration performance of ideal segmented rods[J].Journal of Projectiles,Rockets,Missiles and Guidance,2001,21(2): 23-26.(in Chinese) [16] 陈建良, 李继承.钨纤维增强金属玻璃复合材料分段弹体侵彻性能研究[J].爆炸与冲击, 2020, 40(6):57-68. CHEN J L,LI J C.Ballistic behavior of tungsten fiber/metallic glass matrix composite segmented rods[J]. Explosion and Shock Waves,2020, 40(6):57-68.(in Chinese) [17] 焦文俊, 陈小伟.长杆高速侵彻问题研究进展[J].力学进展, 2019, 49: 312-391. JIAO W J,CHEN X W. Review on long-rod penetration at hypervelocity[J].Explosion and Shock Waves,2019, 49: 312-391. (in Chinese) [18] CHARTERS A C, MENNA T L, PIEKUTOWSKI A J. Penetration dynamics of rods from direct ballistic tests of advanced armor components at 2-3 km/s[J]. International Journal of Impact Engineering, 1990,10(1/2/3/4):93-106. [19] HE Y, WEN H. Predicting the penetration of long rods into semi-infinite metallic targets[J]. Science China Technological Sciences, 2013, 56(11): 2814-2820. [20] CHRISTMAN D R, GEHRING J W. Analysis of high-velocity projectile penetration mechanics[J]. Journal of Applied Physics, 1966, 37(4): 1579-1587. [21] ANDERSON C E,WLKER J D,BLESS S J,et al. On the L/D effect for long-rod penetrators[J]. International Journal of Impact Engineering, 1996, 18(3): 247-264.
|