椭圆变截面弹体斜贯穿薄靶姿态偏转机理

doi:10.12382/bgxb.2021.0367

摘要/Abstract

摘要： 随着新型武器平台的发展，具有良好平台适应性、高升阻比及隐身性能等特点的异形截面（椭圆形及变截面椭圆形）战斗部开始受到广泛关注。为探究椭圆变截面弹体斜贯穿薄靶机理与姿态偏转规律，对3种不同截面（圆形、椭圆形、变截面椭圆形）弹体斜贯穿双层945舰船薄钢板实验过程及结果进行整理与分析，根据椭圆变截面弹体贯穿过程、靶板破坏失效模式与弹体受力特征，将贯穿过程分为弹体头部压入阶段、弹体头部贯穿阶段、过渡阶段与弹身贯穿阶段。基于能量守恒、虚功原理分阶段分析弹体受力特征，建立弹体姿态偏转理论模型。通过对已有实验和数值模拟结果与理论模型所得结果进行对比，验证理论模型的可靠性。采用该理论模型着重讨论弹体撞击速度、初始倾角、质心位置、弹体翻滚角及椭圆截面长短轴之比等参数对椭圆变截面弹体姿态偏转的影响。结果表明：随着椭圆变截面弹体初始撞击速度的增加，弹体姿态偏转角度呈现指数型减小趋势；随着椭圆变截面弹体初始倾角的增大，弹体姿态偏转量增大；随着椭圆变截面弹体质心位置的后置，弹体姿态偏转角度增大；椭圆变截面弹体以不同的翻滚角撞击靶板时，弹体姿态偏转角度不同，γ_pt=0°较γ_pt=90°时弹体姿态偏转角度更大；当γ_pt=0°时，椭圆变截面弹体椭圆截面长短轴之比增大，弹体姿态偏转角度随之增大；当γ_pt=90°时，规律则相反。

关键词: 椭圆变截面弹体, 斜贯穿, 剩余速度, 弹体姿态偏转, 长短轴之比

Abstract: With the development of new weapon platforms, warheads with novel cross-sections (elliptical and variable elliptical cross-sections) have drawn wide attention due to high platform adaptability, lift-drag ratio, and stealth performance. This study investigates the oblique penetration mechanism and the attitude deflection of projectiles with variable elliptical cross-sections by examining projectiles with three types of cross-sections (circle，elliptic，and tapered elliptic) obliquely penetrating a double-layer thin steel plate through experiments. Based on the failure mode of the target plate and the mechanic characteristics of the projectile body, the penetration process is divided into four stages, namely press-in of the projectile nose, penetration of the nose, transition, and penetration of the projectile body. The mechanic characteristics of each projectile at each stage are also analyzed based on the law of energy conservation and virtual work principle. A theoretical model is constructed for the projectile's attitude deflection. The theoretical model is validated through comparing the experimental and simulation results. The model is used to study how the attitude deflection of projectiles with variable elliptical cross-sections is affected by different parameters, including impact velocity, initial oblique angle, centroid position, roll angle, and the long to short axis ratio of the elliptical cross-sections. The results show that as the impact velocity of the projectile increases, the attitude deflection angle decreases exponentially; the deflection increases as the initial oblique angle increases; the deflection increases as the centroid moves away from the projectile nose; the deflection angles vary when the projectile hits the target from different rolling angles; the deflection at γ_pt=0° is greater than that when γ_pt=90°; as the long to short axis ratio increases, the deflection increases when γ_pt=0°, yet it decreases when γ_pt=90°.

Key words: projectileswithvariableellipticalcross-sections, obliqueperforation, residualvelocity, attitudedeflection, longtoshortaxisratio

中图分类号:

O385

田泽，王浩，武海军，邓希旻，皮爱国，李金柱，黄风雷. 椭圆变截面弹体斜贯穿薄靶姿态偏转机理[J]. 兵工学报, 2022, 43(7): 1537-1552.

TIAN Ze， WANG Hao， WU Haijun， DENG Ximin， PI Aiguo， LI Jinzhu， HUANG Fenglei. Attitude Deflection Mechanism of Projectiles with Variable Elliptical Cross-sections Obliquely Perforating Thin Targets[J]. Acta Armamentarii, 2022, 43(7): 1537-1552.

参考文献

［1］ YAKUNINA G Y. Characteristic features of the high-velocity motion of bodies in dense media[J].Journal of Applied Mathematics and Mechanics，2012，76(3):310-323.
[2］ BEN-DOR G，DUBINSKY A，ELPERIN T.Shape optimization of high-speed penetrators: a review[J].Central European Journal of Engineering，2012，2(4):473-482.
[3］ BANICHUK N V，RAGNEDDA F，SERRA M. Probabilistic approach for shape optimization problems in contact mechanics[J].Structural and Multidisciplinary Optimization，2011，43(1): 99-106.
[4］杜忠华，朱建生，王贤治，等.异型侵彻体垂直侵彻半无限靶板的分析模型[J].兵工学报，2009，30(4):403-407.
DU Z H，ZHU J S，WANG X Z，et al.Analytical model on non-circular penetrator impacting semi-infinite target perpendicularly[J].Acta Armamentarii，2009，30(4):403-407. (in Chinese)
[5］高光发，李永池，刘卫国，等.长杆弹截面形状对垂直侵彻深度的影响[J].兵器材料科学与工程，2011，34(3):5-8.
GAO G F，LI Y C，LIU W G，et al. Influence of the cross-section shapes of long rod projectile on the vertical penetration depth[J].Ordnance Material Science and Engineering，2011，34(3):5-8. (in Chinese)
[6］ GUO C，QIAN J，GU W，et al.Penetration characteristics of a penetrator with triangular cross-section impacting semi-infinite targets[J].Mechanics Based Design of Structures and Machines，2020(1):1-14.
[7］ DONG H，WU H，LIU Z，et al.Penetration characteristics of pyramidal projectile into concrete target[J].International Journal of Impact Engineering，2020，143：103583.
[8］杜忠华，曾国强，余春祥，等.异型侵彻体垂直侵彻半无限靶板试验研究[J].弹道学报，2008，20(1):23-25.
DU Z H，ZENG G Q，YU C X，et al.Experimental research of novel penetrator vertically penetrating semi-infinite target [J].Journal of Ballistics，2008，20(1):23-25. (in Chinese)
[9］王文杰，张先锋，邓佳杰，等.椭圆截面弹体侵彻砂浆靶规律分析[J].爆炸与冲击，2018，38(1):164-173.
WANG W J，ZHANG X F，DENG J J，et al.Analysis of projectile penetrating into mortar target with elliptical cross-section[J].Explosion and Shock Waves，2018，38(1):164-173. (in Chinese)
[10］刘子豪，武海军，高旭东，等.椭圆截面弹体侵彻混凝土阻力特性研究[J].爆炸与冲击，2019，39(2):135-141.
LIU Z H，WU H J，GAO X D，et al.Study on the resistance characteristics of elliptical cross-section projectile penetrating concrete[J].Transactions of Beijing Institute of Technology，2019，39(2):135-141.(in Chinese)
[11］ DONG H，LIU Z，WU H，et al.Study on penetration characteristics of high-speed elliptical cross-sectional projectiles into concrete[J].International Journal of Impact Engineering，2019，132:103311.
[12］ DAI X，WANG K，LI M，et al.Rigid elliptical cross-section ogive-nose projectiles penetration into concrete targets[J].Defence Technology，2021，17(3): 800-811.
[13］ BACKMAN M E，GOLDSMITH W.The mechanics of penetration of projectiles into targets[J].International Journal of Engineering Science，1978，16(1):1-99.
[14］ ZUKAS J A. Impact dynmics[M].New York，NY，US：John Wiley & Sons，1981.
[15］ ZUKAS J A. High velocity impact dynamics[M].New York，NY，US：John Wiley & Sons，1990.
[16］ ANDERSON JR C E，BODNER S R.Ballistic impact: the status of analytical and numerical modeling [J]. International Journal of Impact Engineering，1988，7(1): 9-35.
[17］ CORBETT G，REID S，JOHNSON W.Impact loading of plates and shells by free-flying projectiles:a review[J].International Journal of Impact Engineering，1996，18(2):141-230.
[18］ GOLDSMITH W.Non-ideal projectile impact on targets[J].International Journal of Impact Engineering，1999，22(2/3):95-395.
[19］钱伟长.穿甲力学[M].北京：国防工业出版社，1984.
QIAN W C. Armor piercing mechanics[M].Beijing：National Defense Industry Press，1984.(in Chinese)
[20］ ZENER C, PETERSON R E.Mechanism of armor penetration No.A:[R].710/492 Watertown, MA, US: Watertown Arsenal，1943.
[21］ AWERBUCH J，BODNER S.An investigation of oblique perforation of metallic plates by projectiles[J].Experimental Mechanics，1977，17(4):147-153.
[22］ ZAID M，PAUL B.Mechanics of high speed projectile perforation[J].Journal of the Franklin Institute，1957，264(2):117-126.
[23］ BΘRVIK T，OLOVSSON L，DEY S，et al.Normal and oblique impact of small arms bullets on AA6082-T4 aluminium protective plates[J].International Journal of Impact Engineering，2011，38(7): 577-589.
[24］ GOLDSMITH W，FINNEGAN S.Normal and oblique impact of cylindro-conical and cylindrical projectiles on metallic plates[J].International Journal of Impact Engineering，1986，4(2):83-105.
[25］ GUPTA N，MADHU V.Normal and oblique impact of a kinetic energy projectile on mild steel plates[J].International Journal of Impact Engineering，1992，12(3):333-343.
[26］ GUPTA N，MADHU V.An experimental study of normal and oblique impact of hard-core projectile on single and layered plates[J].International Journal of Impact Engineering，1997，19(5/6):395-414.
[27］黄涛，吴卫国，李晓彬，等.截锥形弹体斜穿甲花瓣型破坏模型[J].振动与冲击，2010，29(2):125-127.
HUANG T，WU W G，LI X B，et al.Oblique armor-piercing effect of a truncated cylindroconical projectile[J].Journal of Vibration and Shock，2010，29(2):125-127.(in Chinese)
[28］徐双喜，吴卫国，李晓彬，等.锥头弹小斜角侵彻薄板剩余速度理论分析[J].弹道学报，2010，22(3):58-62.
XU S X，WU W G，LI X B，et al.Theoretical analysis on residual velocity of conical projectile after penetrating thin plate at low oblique angle[J].Journal of Ballistics，2010，22(3):58-62. (in Chinese)
[29］ RECHT R F，IPSON T W.Ballistic perforation dynamics [J].Journal of Applied Mechanics，1963，30(3):384-390.
[30］ RECHT R F，YATTEAU J.Multiple plate penetration modelling for deforming and yawing ballistic penetrators which lose mass[C]∥Proceedings of the 7th International Symposium on Ballistics.Hague，the Netherlands: International Ballistics Committee，1983:271-280.
[31］ LI K，GOLDSMITH W. An analytical model for tumbling projectile perforation of thin aluminum plates[J].International Journal of Impact Engineering，1996，18(1):45-63.
[32］ LI K，GOLDSMITH W.A phenomenological model for perforation of moderately thick plates by tumbling projectiles [J].International Journal of Solids and Structures，1996，33(24): 3561-3575.
[33］ LI K，GOLDSMITH W.Perforation of steel and polycarbonate plates by tumbling projectiles[J]. International Journal of Solids and Structures，1997，34(35/36):4581-4596.
[34］ CHEN X，LI Q，FAN S.Oblique perforation of thick metallic plates by rigid projectiles[J].Acta Mechanica Sinica，2006，22(4): 367-376.
[35］ DENG Y，LI J，JIA B，et al.Numerical study of failure modes and crack propagation in 2A12 aluminum target against blunt-nosed projectile at low yaw angle[J].Strength of Materials，2016，48(6): 834-849.
[36］ IQBAL M，SENTHIL K，MADHU V，et al.Oblique impact on single，layered and spaced mild steel targets by 7.62 AP projectiles[J].International Journal of Impact Engineering，2017，110:26-38.
[37］杜华池，张先锋，刘闯，等.弹体斜侵彻多层间隔钢靶的弹道特性[J].兵工学报，2021，42（6）：1204-1214.
DU H C，ZHANG X F，LIU C，et al. Trajectory characteristics of projectile into steel target with multi-layer space structure[J].Acta Armamentarii，2021，42（6）：1204-1214. (in Chinese)
[38］王浩，武海军，闫雷，等.椭圆横截面弹体斜贯穿双层间隔薄钢板失效模式[J].兵工学报,2020,41(增刊2）：1-11.
WANG H，WU H J，YAN L，et al. Failure mode of oblique perforation of truncated ogive-nosed projectiles with elliptic cross-section into double-layered thin steel plate with gap space[J].Acta Armamentarii，2020，41（S2）：1-11. (in Chinese)
[39］ GOLDSMITH W，TAM E，TOMER D.Yawing impact on thin plates by blunt projectiles[J].International Journal of Impact Engineering，1995，16(3):479-498.
[40］ ZHANG T.Rupture of thin ductile tubes by oblique impact of flat-nosed missiles:analysis[J].International Journal of Impact Engineering，1998，21(7):541-570.

[1]	徐伟，侯海量，朱锡，陈长海，李茂. 平头弹低速冲击下薄钢板的穿甲破坏机理研究[J]. 兵工学报, 2018, 39(5): 883-892.
[2]	王晓强，朱锡，梅志远. 高速钢质破片侵彻高强聚乙烯纤维增强塑料层合板试验研究[J]. 兵工学报, 2009, 30(12): 1574-1578.
[3]	米双山，何剑彬，张锡恩，陈健. 战斗损伤仿真中的等效靶与破片终点速度研究[J]. 兵工学报, 2005, 26(5): 605-608.
[4]	1:赵振荣;2:裴思行. 球形破片对人员的杀伤威力研究[J]. 兵工学报, 1994, 15(4): 15-19.