基于粒子法的柔性气缸导弹弹射数值仿真

doi:10.12382/bgxb.2021.0098

摘要/Abstract

摘要： 为进一步提高冷发射装备的可控性、隐蔽性、可重复性和轻量化等作战能力，对一种柔性气缸导弹弹射方式和弹射系统的工作机理进行研究。以粒子法为主要计算方法，对柔性气缸内部的气体射流进行数值计算，结合有限元方法，仿真计算柔性气缸流固耦合工作过程。通过柔性气缸导弹弹射系统实验结果与数值仿真结果的数据对比，验证数值计算方法的正确性与可靠性。改变计算参数，以某16吨导弹为研究对象，对柔性气缸导弹弹射系统的多喷口弹射与弹射工质进行规律性探索。发现柔性气缸导弹弹射系统工作过程中，导弹过载出现两次峰值且较为平滑，调整各个喷口启动时间，可使导弹的弹射动能基本不变，又可优化导弹过载。相比于高压氮气和高压空气，以超临界二氧化碳为弹射工质的柔性气缸导弹弹射系统中，导弹获取的弹射动能下降约41.1%，系统的弹射时间延长约17.1%。

关键词: 柔性气缸导弹弹射, 粒子法, 流体与固体耦合, 多喷口弹射, 弹射工质

Abstract: The working mechanism of a flexible cylinder ejection system and its ejection mode are studied to further improve the controllability, concealment, repeatability and lightweight of cold launch equipment. Corpuscular method is used to calculate the gas jet inside the flexible cylinder, and simulate and calculate the fluid-structure interaction of the flexible cylinder combined with finite element method. The experimental results and the numerically simulated results of the flexible cylinder ejection system are compared to verify the correctness and reliability of the numerical calculation method. For a 16-ton missile, the multi-nozzle ejection and ejection medium of the flexible cylinder ejection system were explored by changing the calculation parameters. It is found that the missile overload has two peaks and is relatively smooth during the work of the flexible cylinder ejection system. The ejection kinetic energy of the missile is basically unchanged and the missile overload is optimized by adjusting the starting time of each nozzle. In the flexible cylinder ejection system using supercritical carbon dioxide, instead of high-pressure nitrogen or high-pressure air, as the ejection medium, the ejection kinetic energy obtained by the missile is reduced by about 41.1%, and the ejection time of the system is extended by about 17.1%.

Key words: flexiblecylinderejection, corpuscularmethod, fluid-structureinteraction, multi-jetejection, ejectionmedium

中图分类号:

TJ768.2

赵振，姜毅，刘相新，李玉龙，严松. 基于粒子法的柔性气缸导弹弹射数值仿真[J]. 兵工学报, 2022, 43(3): 533-541.

ZHAO Zhen， JIANG Yi， LIU Xiangxin， LI Yulong， YAN Song. Numerical Simulation of Ejecting a Missile From Missile Ejection System with Flexible Cylinder Based on Corpuscular Method[J]. Acta Armamentarii, 2022, 43(3): 533-541.

参考文献

［1］杨珺凡,傅德彬,毕凤阳,等.水下弹射筒口气泡及载荷特性数值研究[J].固体火箭技术, 2021,44(3) : 414-419.
YANG J F, FU D B, BI F Y,et al. Numerical study on characteristics of outlet gas bubble and load of underwater ejection launch [J]. Journal of Solid Rocket Technology, 2021,44(3): 414-419. (in Chinese)
[2］李德庚,周明,黄迟,等.无人机气压弹射起飞动力学仿真分析[J].机械工程师,2020(12):96-99.
LI D G, ZHOU M, HUANG C,et al. Dynamics simulation and analysis on pneumatic catapult assisted take-off of UAV [J]. Mechanical Engineer, 2020(12):96-99. (in Chinese)
[3］马翔,徐海平,黄科.UUV用多级助推式弹射过程建模与仿真[J].舰船科学技术,2020,42(23):58-62.
MA X, XU H P, HUANG K. Model and simulation research of catapult with multi-stage booster for UUV [J]. Ship Science and Technology, 2020,42(23):58-62. (in Chinese)
[4］姚琳,马大为,马吴宁,等.两级提拉式单侧弹射装置内弹道建模与优化[J].兵工学报,2017,38(3):466-475.
YAO L, MA D W, MA W N,et al. Interior ballistics modeling and optimization of one-side ejection device with two-stage cylinder [J]. Acta Armamentarii, 2017,38(3):466-475. (in Chinese)
[5］蔺志强,陈桂明,许令亮,等.基于遗传算法的导弹电磁弹射器电机参数优化[J].火炮发射与控制学报,2020,41(4):43-48.
LIN Z Q, CHEN G M, XU L L,et al. Optimization of missile electromagnetic ejector motor parameters based on genetic algorithm [J]. Journal of Gun Launch and Control, 2020,41(4):43-48. (in Chinese)
[6］张强. 核动力叠加电磁弹射法新航母或为欧盟国家立标杆[N]. 科技日报,2020-12-16.
ZHANG Q. Nuclear powered superimposed electromagnetic catapult France's new aircraft carriermay set a benchmark for EU countries [N]. Science and Technology Daily, 2020-12-16. (in Chinese)
[7］柳忠彬,肖守讷,王欢.非爆破柔性气缸弹射器研究[J].兵工学报,2017,38(2):389-395.
LIU Z B, XIAO S N, WANG H. Study on non-blasting flexible cylinder catapult [J]. Acta Armamentarii, 2017,38(2):389-395. (in Chinese)
[8］ WANG J T. An analytical model for an airbag with a hybrid inflator[J]. ASME Crashworththiness and Occupant Protection in Transportation Systems, 1995,30:467-497.
[9］ WANG J T, NEFSKE D J. A new CAL3D airbag inflation model[J]. SAE Transactions, 1988,97:697-706.
［10］ HIRT C W, AMSDEN A A, COOK J L. An arbitrary Lagrangian-Eulerian computing method for all flow speeds［J］.Journal of Computational Physics, 1997,135(2):203-216.
[11］ OLOVSSON L. Corpuscular method for OOP Simulations, difficulty dealing with small vent holes[C]∥Proceedings of the 6th European LS-DYNA Users' Conference. Gothenburg, Sweden: ERAB, 2007:1-4.
[12］ MROZ K, PIPKORN B. Mathematical modelling of the early phase deployment of a passenger airbag-folding using origami theory and inflation using LS-DYNA particle method[C]∥Proceedings of the 6th European LS-DYNA Users' Conference. Gothenburg, Sweden: ERAB, 2007:71-86.
[13］ FREISINGER M, HOFFMANN J, STAHLSCHMIDT S. Investigation of the early inflation characteristics of a complex folded knee airbag with the new corpuscular method in LS-DYNA[C]∥Proceedings of the 6th European LS-DYNA Users' Conference. Gothenburg, Sweden : ERAB, 2007:7-20.
[14］ HIRTH A, HAUFE A, OLOVSSON L. Airbag simulation with LS-DYNA past-present-future[C]∥Proceedings of the 6th European LS-DYNA Users, Conference. Gothenburg, Sweden: ERAB, 2007: 23-46.
[15］ OLOVSSON L. Corpuscular method for airbag deployment simulations[C]∥Proceedings of the 6th European LS-DYNA Users' Conference. Gothenburg,Sweden: ERAB,2007:61-70.

[1]	张宝振，王汉平，窦建中，程梦文. 发射筒易碎前盖开盖过程的流体与固体耦合仿真方法[J]. 兵工学报, 2021, 42(8): 1660-1669.
[2]	刘文思，陆越，周庆飞，程素秋. 鱼雷近场爆炸复杂载荷及对舰船毁伤模式[J]. 兵工学报, 2021, 42(4): 842-850.
[3]	张晓光，李斌，党会学，温金鹏，孙潘. 水下航行体充气上浮仿真方法研究[J]. 兵工学报, 2020, 41(7): 1249-1261.
[4]	张琳，魏超，胡纪滨，胡琦. 车用空载湿式离合器高速碰撞摩擦特性及带排转矩分析[J]. 兵工学报, 2020, 41(7): 1270-1279.
[5]	胡明勇，张志宏，刘巨斌，孟庆昌. 低亚声速射弹垂直入水的流体与固体耦合数值计算研究[J]. 兵工学报, 2018, 39(3): 560-568.
[6]	程修妍，范博超，荣吉利，张涛，项大林. 柔性整流罩地面展开试验仿真分析与飞行状态分离预测[J]. 兵工学报, 2018, 39(3): 608-617.
[7]	陈鑫，罗祎，李爱华. 水下弹性角反射器声散射特性[J]. 兵工学报, 2018, 39(11): 2236-2242.